Shark Ultimate Professional Manual

Shark Strygejern Ultimate Professional

Læs nedenfor 📖 manual på dansk for Shark Ultimate Professional (2 sider) i kategorien Strygejern. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

BEFORE FIRST TIME USE

1 Before using your iron for the ﬁrst time, please remove all the packaging material.

2 When you turn on the iron for the ﬁrst time it might emit an odor for the ﬁrst ten

minutes. This is because the materials used in making the iron are heating up. The

odor is safe and should not re-occur after the initial heating.

USING YOUR IRON

3 Pour water carefully into the water tank without going over

“Max” line. Make sure the Water Inlet Door is closed to

avoid spilling while in use.

4 Plug in the iron into any polarized electrical outlet.

The Power LED Indicator Light on the display panel

will light up.

5 Set the desired fabric/temperature by pressing the

Fabric/Temperature Selector button on the handle of the iron.

6 The LED Indicator Light next to the selected temperature will ﬂash green and then will

become solid green once the selected temperature is reached. If you wish to change

the temperature, press the Fabric/Temperature Selector button and the LED Indicator

Light will start to ﬂash green to show that the iron is either heating up or cooling down.

The LED Indicator Light will turn solid green again when the iron reaches the selected

temperature.

7 Turn the Variable Steam/Self-Clean Dial to a select “ ” (high) or “ ” (low) steam

setting. Select “ ” on the Variable Steam/Self-Clean Dial for dry ironing. You can

now start ironing.

8 Use the Steam Burst Button to remove stubborn wrinkles. Allow an interval of 3

seconds between each burst. Overuse of the steam burst may cause water spitting or

weak steam performance.

9 The Steam Burst feature also works in the vertical position. This is especially useful to

remove wrinkles from hanging clothes, delicate garments and other fabrics. Hold the

iron in the upright position several inches away from the article.

10 Use the Spray Button to dampen the fabric to tackle tough wrinkles, if necessary.

ANTI-DRIP FUNCTION

11 The Anti-Drip Function is built in to this iron. It prevents water spitting when the

temperature is too low.

12 Steam cannot be produced if the soleplate is not hot enough. It may result in water

spitting or leaking from the soleplate. The Anti-Drip Function reduces water dripping

and leaking when ironing at low temperatures.

ANTI-CALCIUM

13 This iron has built in the anti-calcium system that prolongs the life of the iron.

14 If you have very hard water, we recommend using distilled water instead of tap water.

ELECTRONIC MULTI POSITION AUTO-OFF

15 This iron is equipped with an electronic auto-off feature that switches the iron off if

it has been idle for 15 minutes in the upright position and after 30 seconds in the

sideways or ﬂat positions.

16 The LED Indicator Light next to the Auto-Off on the Fabric/Temperature Selector

display will ﬂash red when the iron is in the auto-off mode. To turn the iron back on,

hold the iron in the horizontal position and gently rock the iron back and forth several

times until the Power Indicator Light is re-illuminated. Select the temperature again.

The iron might have to warm up for a minute if the auto-off feature was activated for an

extended time.

SELF-CLEANING

17 Fill the water tank to the “MAX” level. Do not overﬁll.

18 Stand the iron on its heel, standing up on a protected surface and plug into the

electrical outlet.

19 Set the Fabric/Temperature Selector to the Linen/Cotton “ ” setting. Wait until the

light stops ﬂashing. The iron is now on the preset temperature.

20 Hold the iron horizontally over the sink. Turn and hold the Variable Steam Control Dial

all the way to the SELF CLEAN position.

21 Move the iron back and forth. Boiling water and steam will now be ejected from the

holes in the soleplate. Use caution when doing this as the water and the steam are hot

enough to cause burns.

22 Repeat step 19 until the impurities and scale are washed away.

23 Empty any excess water from the tank. Don’t touch the hot surfaces, water or steam

because injury may occur.

24 Release the steam dial and it will automatically go to the Linen/Cotton “ ” setting.

25 Place the iron in upright position and let it cool down.

USEFUL TIPS

26 Read all garment care labels before you start ironing. You can also test the

temperature of the iron on a hem or an inside seam.

27 Iron similar fabrics together and in sequence of synthetic ﬁbers, nylon, silk/wool,

polyester, and cotton/linen. This will reduce the need to adjust the temperature

frequently.

TECHNICAL SPECIFICATIONS: 120 Volts, 60 Hz., 1800 Watts

IRONING GUIDE

FEATURES

STORAGE AND CARE

28 Always set the Variable Steam Control Dial to “ ” after you have emptied the

water tank.

29 Allow the iron to cool down before putting it away.

30 Place the iron in the upright position during heating up, cooling down and storage.

31 Avoid any sharp material contacting the soleplate.

32 Every two weeks, clean the exterior of the iron with a damp cloth and wipe dry.

33 If you use spray starch, wipe the soleplate occasionally with a soft, damp cloth to

prevent deposit build-up.

34 If the iron hasn’t been used in a few weeks, hold the iron horizontally and allow

steaming for 2 minutes before ironing.

ALWAYS REMEMBER

35 Turn the Fabric/Temperature Selector to “Nylon” and then unplug the iron from the

electrical outlet before pouring water into the iron.

36 Always empty the water in the iron after each use.

37 Never iron or steam clothes while they are being worn.

38 Be very careful when ﬁlling the iron with water. Injuries may occur if the hot metal

parts, hot water, or steam are contacted.

TROUBLE SHOOTING

This appliance has a polarized plug (one blade is wider than the other).

As a safety feature, this plug will ﬁt into a polarized outlet only one way.

If the plug does not ﬁt fully into the outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed electrician. Do not attempt to defeat this

safety feature.

The iron doesn’t

heat up

An odor is being

emitted from the

new iron or small

particles are

coming out

Iron doesn’t

steam

Water droplets

coming from

steam vents.

Iron should be plugged into a polarized electric outlet only.

Make sure the plug is securely in the socket.

Temperature setting might be too low.

Try turning to a higher setting.

Auto-off feature is activated.

This is normal.

Follow the instructions for ﬁrst-time use and allow iron to steam

through 2-3 ﬁllings and press the Steam Burst Button occasionally

to eliminate small white particles.

Water tank may be empty or water level is very low. Add water.

Steam control is set on “ ”.

Make sure the Fabric/Temperature Selector setting and the

Variable Steam Control Dial are correctly set. For maximum steam,

set “ ” on steam control dial and the temperature setting should

be set on “Linen/Cotton”.

The soleplate is not hot enough and the anti-drip feature switches

off the steam. Always allow the iron to reach the selected

temperature with the Variable Steam Dial setting at “ ”. For more

steam, turn the Fabric/Temperature Selector to “Linen/Cotton” and

the Variable Steam Control Dial to “ ”.

If the temperature setting and steam control settings are correct

and there is no steam, gently move the iron left or right a couple

of times. Move the Variable Steam Control Dial from “ ” to “ ”

a few times.

Variable Steam Control Dial may be set in “SELF CLEAN” position.

Align the dial from the “ ” to “ ” on the steam setting.

Iron may not be hot enough. Set Fabric/Temperature Selector to

“Linen/Cotton” position. Always allow iron sufﬁcient time to heat up

before activating the Variable Steam Control Dial.

The Steam Burst button may have been overused. Allow more time

between each burst.

SAVE THESE INSTRUCTIONS

ONE YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects

and workmanship for a period of one (1) year from the date of purchase when

utilized for normal household use, subject to the following conditions, exclusions and

exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair

or replacement of the unit at our option. This warranty does not cover normal wear

of parts and does not apply to any unit that has been tampered with or used for

commercial purposes. This limited warranty does not cover damage caused by

misuse, abuse, negligent handling or damage due to faulty packaging or mishandling

in transit. This warranty does not cover damage or defects caused by or resulting

from damages from shipping or repairs, service or alteration to the product or any

of its parts, which have been performed by a repair person not authorized by

EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household

conditions within the warranty period, you may return the complete appliance and

accessories with proof of purchase and date, freight prepaid. For customer service

support, call or visit our website at .1-800-798-7398 www.sharkclean.com

If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO

Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of

purchase date and check made payable to EURO-PRO Operating LLC in the amount

of $12.95 to cover the cost of return shipping and handling must be included.

This warranty is extended to the original purchaser of the unit and excludes all

other legal, implied and/or conventional warranties. The responsibility of EURO-PRO

Operating LLC if any, is limited to the speciﬁc obligations expressly assumed by it

under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC

liable for incidental or consequential damages to anyone of any nature whatsoever.

Some states do not permit the exclusion or limitation of incidental or consequential

damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other

rights which vary from state to state or province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include

proof of purchase date and to attach a tag to item before packing including your

name, complete address and phone number with a note giving purchase information,

model number and what you believe is the problem with the item. We recommend

you insure the package (as damage in shipping is not covered by your warranty).

Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are

constantly striving to improve our products, therefore the speciﬁcations contained

herein are subject to change without notice.

CAUTION! TO PREVENT ELECTRIC SHOCK OR OTHER INJURY, before ﬁlling the iron with

water, make sure that the plug is removed from the outlet.

WARNING: Never ﬁll the iron with fabric conditioner, starches, or any other solution, as

these will damage the steam mechanism. Do not use contaminated water.

CAUTION! TO AVOID FIRE, never leave iron unattended while it is plugged in.

CAUTION! TO PREVENT ELECTRIC SHOCK, never use the iron in a location where it

can fall or be pulled into water or any other liquid. If the iron falls into water or any other

liquid, unplug it immediately. DO NOT reach into the water or liquid.

WARNING: Never use scouring pads, abrasive or chemical cleaners, or solvents to

clean the exterior or soleplate of your iron. Doing so will scratch and/or damage the

surface.

CAUTION! DO NOT aim iron at face, towards yourself, or anyone else while using or

adjusting steam. Burns or serious injury may occur.

SPECIAL INSTRUCTIONS

1. To avoid a circuit overload, do not operate another high-wattage appliance on the

same circuit.

2. If an extension cord is absolutely necessary, use a 15-ampere cord. Cords rated for less

amperage may overheat. Use care to arrange the cord so that it cannot be pulled or

tripped over.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR IRON

When using your iron, basic safety precautions should always be followed,

including the following:

1. Use iron only for its intended use.

2. To protect against risk of electrical shock, do not immerse the iron in water or other

liquids.

3. DO NOT yank cord to disconnect from outlet. Grasp plug and pull to disconnect.

4. DO NOT allow cord to touch hot surfaces. Set the Fabric/Temperature Selector Button

to “Nylon” before unplugging the iron. Let iron cool completely before putting away. Loop

cord loosely around iron when storing.

5. Always disconnect iron from electrical outlet when ﬁlling with water, emptying, or when

not in use.

DO NOT operate iron with a damaged cord, after the iron has been dropped or damaged

in any manner, or if it is leaking. To avoid the risk of electric shock, do not disassemble the

iron. Return to EURO-PRO Operating LLC for examination, repair, or adjustment. Incorrect

reassembly can cause the risk of electric shock when the iron is used.

7. IMPORTANT: This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

Close Supervision DO NOT is necessary for any appliance being used near children.

leave iron unattended while connected or on an ironing board.

8. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when

you turn a steam iron upside down; there may be hot water in the reservoir.

9. When placing the iron in its upright position, ensure that the surface on which the iron is

placed is stable. Never use or rest the iron on an unstable surface.

10. While the iron is hot, never set iron on an unprotected surface - even if it is on its heel

rest.

11. Always store your iron standing upright, not on the soleplate. If stored face down, even

the smallest amount of moisture will cause the soleplate to corrode and stain.

12. This appliance is for household use only.

GI505series_55.E.F.130822.2

FABRIC TYPE

LABEL

INDICATION

FABRIC/TEMP.

SELECTOR

STEAM

CONTROL

BURST OF

STEAM

SPRAY

Please note

that the symbol

above on the

l abel

of your garment

means that

THE ARTICLE

CANNOT BE

IRONED

NONO NO YES

YESYES YES YES

Nylon Wool or Silk Polyester Linen or

Cotton

Nylon Wool/Silk Polyester Linen/Cotton

1 Stainless Steel Soleplate

2 Water Inlet Door

3 Spray Button

4 Fabric/Temperature Selector

5 Spray Nozzle

6 Steam Burst Button

7 Variable Steam/Self-Clean

Dial

8 Water Level Window

9 LED Indicator Light

10 Pivot Cord

11 Anti-Drip Function (not shown)

12 Built-In Anti-Calcium Filter

(not shown)

1 2 3

This manual covers model numbers:

GI505 55, GI505C 55, GI505WM 55

Euro-Pro Operating LLC

Newton, MA 02459

1-800-798-7398

PRINTED IN CHINA

Illustrations may differ from actual product.

Euro-Pro Shark and are trademarks of Euro-Pro Operating LLC.

OWNER’S GUIDE

GI505 series

Produkt Specifikationer

Mærke:	Shark
Kategori:	Strygejern
Model:	Ultimate Professional
Type:	Tør & dampstrygejern
Justerbar termostat:	Ja
Vekselstrømsindgangsspænding:	120 V
Vekselstrømsindgangsfrekvens:	60 Hz
Produktfarve:	Graphite, Orange
Strøm:	1800 W
Ledningslængde:	- m
Vandtank volumen:	0.36 L
Indikatorlampe:	Ja
Soft greb:	Ja
LED-indikatorer:	Ja
Automatisk anti-kalk:	Ja
Ledningsfri:	Ingen
Vandmåler:	Ja
Målebæger:	Ja
Konstant damp:	- g/min
Variabel dampindstilling:	Ja
Strygesål, type:	Rustfri strygesål
Ydeevne for damp:	- g/min
Ledning der ikke kan drejes:	Ja