Shimano CN-M8100 Manual


Læs nedenfor 📖 manual på dansk for Shimano CN-M8100 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Chain
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are
not found in the user's manual. A dealer's manual for professional
and experienced bicycle mechanics is available on our website (https://
si.shimano.com).
For safety, be sure to read this “user's manual”
thoroughly before use, follow it for correct use,
and store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result
in death or serious injury.
WARNING Failure to follow the instructions could
result in death or serious injury.
CAUTION
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
Important Safety Information
WARNING
Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
Never use alkali based or acid based solvents, such as rust cleaners. If
those solvents are used the chain might break and cause serious
injury.
Clean the chain with an appropriate chain cleaner regularly. Intervals
between maintenance depend on the use and riding circumstances.
Check the chain for any damage (deformation or cracking), skipping,
or other abnormalities such as unintended gear shifting. If any
problems are found, consult your place of purchase or a distributor.
The chain may break, and you may fall.
Notice
The gears should be periodically washed with a neutral detergent and
then lubricated. In addition, cleaning the chain with a neutral
detergent and lubricating it can be an effective way of extending the
life of the chain.
Products are not guaranteed against natural wear and deterioration
from normal use and aging.
For maximum performance we highly recommend Shimano lubricants
and maintenance products.
Regular Inspections Before Riding the Bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
Does the chain have deformations or cracks?
Does the chain skip or does unintended gear shifting occur?
UM-0AH0A-006 User's manual
Please note: specifications are subject to change for improvement without notice. (English)
© Jun. 2020 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: CN-M8100

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano CN-M8100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024