Shimano EW-EX010 Manual


Læs nedenfor 📖 manual på dansk for Shimano EW-EX010 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 43 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Di2 Adapter B
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on installation,
adjustment, and replacement of the products which are not found in the user's
manual. A dealer's manual for professional and experienced bicycle mechanics is
available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly
before use, follow it for correct use, and store it so that it
can be referenced at any time.
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings. The
instructions are classified according to the degree of danger or damage which may
occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result in
death or serious injury.
WARNING Failure to follow the instructions could result in
death or serious injury.
CAUTION
Failure to follow the instructions could cause
personal injury or physical damage to equipment
and surroundings.
Important safety information
WARNING
Do not disassemble or modify the product. This may cause the product to not
operate correctly, and you may suddenly fall and be seriously injured.
Do not connect to batteries other than BOSCH batteries. If this is not observed,
bursting, overheating, or malfunction may occur.
Also, check the manual for the BOSCH eBike system.
Notice
Do not keep connecting and disconnecting the small waterproof connector.
Doing so may impair the waterproofing.
The components are designed to be fully waterproofed to withstand wet weather
riding conditions; however, do not deliberately place them into water.
Do not clean the bicycle with a high-pressure washer. If water gets into any of the
components, operating problems or rusting may result.
Handle the components carefully, and avoid subjecting them to strong shock.
Contact the place of purchase for updates of the component software. The most
up-to-date information is available on the SHIMANO website.
Do not use thinner or other solvents to clean the products. Such solvents may
damage the surface.
Be careful not to get water into the E-TUBE ports.
Do not install near heat-emitting apparatus. There is a risk of the unit's
temperature rising above the operating temperature range.
If the operating temperature range has been exceeded, the unit will not be
operational until the unit's temperature has returned to within the operating
range.
Operating temperature range -10°C - 50°C
Storage temperature range -20°C - 70°C
Products are not guaranteed against natural wear and deterioration from normal
use and aging.
For maximum performance we highly recommend SHIMANO lubricants and
maintenance products.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found,
consult your place of purchase or a distributor.
Are the electric wires securely connected?
Is gear shifting carried out smoothly?
Names of parts
Junction
Shift switch
BOSCH battery
Rear shifting system Di2 Adapter B
BOSCH eBike drive unit
Error code
If the error codes are displayed on the BOSCH display, contact the place of purchase
or a distributor.
Code Details
ID700 The Di2 Adapter may have malfunctioned.
ID720 The BOSCH eBike Drive Unit is not compatible with the Di2 Adapter.
ID724 Rear shifting system adjustment failed.
ID725 An SEIS* which is not compatible with the Di2 Adapter may be
currently connected.
ID726 SEIS* (shifting unit) may not be properly connected.
ID727 The Di2 shift switch may not be properly connected.
ID729 An assist switch compatible with SHIMANO STEPS is connected.
ID799 The BOSCH eBike Drive Unit software version is not supported.
* SEIS: SHIMANO ELECTRONIC INTELLIGENT SYSTEM
UM-EX01B-000 User's Manual
Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2021 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: EW-EX010

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano EW-EX010 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024