Shimano FC-MT600-B2 Manual


Læs nedenfor 📖 manual på dansk for Shimano FC-MT600-B2 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Crankset / Bottom
Bracket
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are
not found in the user's manual. A dealer's manual for professional
and experienced bicycle mechanics is available on our website (https://
si.shimano.com).
For safety, be sure to read this user's manual
thoroughly before use, follow it for correct use,
and store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result
in death or serious injury.
WARNING Failure to follow the instructions could
result in death or serious injury.
CAUTION
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
Important safety information
WARNING
Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
Check that there are no cracks in the crank arms before riding the
bicycle. If there are any cracks, the crank arm may break and you may
fall off the bicycle.
Be careful not to let the hemming of your clothes get caught in the
chain while riding. Otherwise, you may fall off the bicycle.
CAUTION
Be careful not to touch the teeth of chainrings. There is a danger of
injury.
Notice
Use a neutral detergent to clean the crank arms and the bottom
bracket. Using alkaline or acidic detergents may cause discoloration.
If pedaling performance does not feel normal, perform an inspection
again.
Do not wash the surrounding area of the bottom bracket with a
high-pressure wash.
The chainrings should be periodically washed with a neutral
detergent. In addition, cleaning the chain with neutral detergent and
lubricating it can be an effective way of extending the life of the
chainrings and the chain.
The cuffs of your clothing may get dirty from the chain while riding.
Products are not guaranteed against natural wear and deterioration
from normal use and aging.
For maximum performance we highly recommend SHIMANO
lubricants and maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
Are there any cracks in the crank arms?
Is the pedaling performance smooth?
Does the drivetrain perform gear shifting smoothly?
Is there looseness in the component parts?
Are the components securely installed to the frame/handlebar?
Do any abnormal noises occur while riding?
Names of parts
Unit bearing types
Chainring
Bearing section
(bottom bracket)
Crank
Fastening section
Crank
Non-unit bearing types
Chainring
Bearing section
(bottom bracket)
Crank
Fastening
section
Fastening sectionFastening section
Crank
UM-1NJ0A-005 User's Manual
Please note: specifications are subject to change for improvement without notice. (English)
© Nov. 2021 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: FC-MT600-B2

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano FC-MT600-B2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024