Shimano PD-ED500 Manual

Shimano Cykel tilbehør PD-ED500

Læs nedenfor 📖 manual på dansk for Shimano PD-ED500 (1 sider) i kategorien Cykel tilbehør. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

Please note: speciﬁ cations are subject to change for improvement without notice. (English)

UM-L890A-001-00 User's manual

SPD Pedals

Light Action

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

•Contact the place of purchase or a bicycle dealer for information on installation and

adjustment of the products which are not found in the user's manual. A dealer's

manual for professional and experienced bicycle mechanics is available on our website

(http://si.shimano.com).

•Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly before use,

and follow it for correct use.

Important Safety Information

For replacement information, contact the place of purchase or a bicycle

dealer.

WARNING TO PARENT / GUARDIAN

•USE OF THIS PRODUCT IN ACCORDANCE WITH THESE USER'S MANUALS IS ESSENTIAL

FOR YOUR CHILD'S SAFETY. MAKE SURE YOU AND YOUR CHILD UNDERSTAND THESE

USER'S MANUALS. FAILURE TO FOLLOW THESE USER'S MANUALS MAY RESULT IN

SERIOUS PERSONAL INJURY.

WARNING

•These pedals are designed for recreation. These pedals can be engaged with and

released from the cleats more easily than SPD pedals. These pedals are designed for

non competition and non aggressive uses. If they are used aggressively the cleats may

become accidentally released from the pedals and you may fall off the bicycle.

•These pedals are designed so that you release them only when intended.

They are not designed to release automatically at times such as when falling off the

bicycle.

•Use only SPD shoes with this product. Other types of shoes may not release from the

pedals, or may release unexpectedly.

•Use only Shimano cleats (SM-SH51 / SM-SH56) and tighten the mounting bolts securely

to the shoes.

•Before attempting to ride with these pedals and shoes, make sure you understand the

operation of the engagement / release mechanism for the pedals and cleats (shoes).

•Before you attempt to ride with these pedals and shoes, apply the brakes, then place

one foot on the ground and practice engaging and releasing each shoe from its pedal

until you can do so naturally and with minimal effort.

•Ride on level ground ﬁ rst until you become accustomed to engaging and releasing

your shoes from the pedals.

•Before riding, adjust the spring tension of the pedals to your liking.

If the spring tension of the pedals is low, the cleats may become accidentally released

and you may lose balance and fall off the bicycle. If the spring tension of the pedals is

high, the cleats cannot be easily released.

•When riding at low speed or when there is a possibility that you might need to stop

riding, (for example, when doing a U-turn, nearing an intersection, riding uphill or

turning a blind curve), release your shoes from the pedal beforehand so that you can

quickly put your feet onto the ground at any time.

•Use a lighter spring tension for attaching the pedal cleats when riding in adverse

conditions.

•Keep cleats and bindings out of dirt and debris to ensure proper engagement and

release.

•Remember to check the cleats periodically for wear. When the cleats are worn, replace

them. Always check the spring tension before riding and after replacing the pedal

cleats.

BE SURE TO READ AND FOLLOW THE ABOVE WARNINGS CAREFULLY.

If the warnings are not followed, your shoes may not come out of the pedals when

you intend or they may come out unexpectedly or accidentally, and severe injury

may result.

•Reﬂ ectors have to be mounted to the bike at any time as soon as traveling on public

roads.

•Optional reﬂ ectors are available for models that do not come equipped with reﬂ ectors

as standard. For information on suitable reﬂ ectors, contact the place of purchase or a

bicycle dealer.

•Do not continue riding the bicycle if the reﬂ ectors are dirty or damaged, otherwise it

becomes more difﬁ cult for oncoming vehicles to see you.

•After reading the user's manual carefully, keep it in a safe place for later reference.

Note

•In addition, if pedaling performance does not feel normal, check this once more.

•If you experience any trouble with the rotating parts of the pedal, the pedal may

require adjustment. Contact the place of purchase or a bicycle dealer.

•Parts are not guaranteed to resist natural wear or deterioration resulting from normal

use.

•For maximum performance we highly recommend Shimano lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found with the

following items, contact the place of purchase or a bicycle dealer.

•Are the fastening sections ﬁ xed securely?

•Is there a large play between the cleats and the pedals because of wear?

•Are there any abnormalities in the engagement and release of the cleats?

•Are there any abnormal noises?

Names of parts

Fastening

section

Binding

Cleat types and using the pedals

WARNING

Do not use the pedals and cleats in any way other than as

described in these user's manuals. The cleats are designed

to engage and release from the pedals when facing

forward.

See below for instructions on how to install the cleats.

FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN

SERIOUS PERSONAL INJURY.

Front

Single release mode cleats (SM-SH51) and multiple release mode cleats (SM-SH56) are

available for use with these pedals.

Each type of cleat has its own distinctive features, so be sure to read the Service

Instructions carefully and select whichever type of cleat best suits your riding style

and the terrain and riding conditions which you will encounter.

Other types of cleats, such as single release mode cleats (SM-SH52) and multiple

release mode cleats (SM-SH55), cannot be used as they do not provide stable enough

step-out performance or sufﬁ cient holding force.

Engaging the cleats with the pedals

Press the cleats into the pedals with a forward

and downward motion.

Releasing the cleats from the pedals

The method of release varies according to the type of cleats you are using. (Check the

model number and color of your cleats to determine the proper method of release.)

Multiple release mode cleats:

SM-SH56

(silver, gold)

Single release mode cleats:

SM-SH51

(black / Optional accessory)

The cleats can be released by twisting

your heel in any direction.

These cleats only release when the

heel is moved .outward

They will not release if the heel is

twisted in any other direction.

Because the cleats can also be released

by lifting your heel, they may become

accidentally released when applying

upward force on the pedals.

These cleats should not be used for

riding which involves pulling up on the

pedals, or for activities such as

jumping, in which pulling force is

applied to the pedals causing possible

release.

Upward force may be applied to the

pedal, since they will not release unless

the foot is twisted outward.

Although the cleats can be released by

twisting your heels in any direction, or

by lifting, they will not necessarily

release if you lose your balance.

Accordingly, for places and conditions

where it looks as though you may lose

balance, make sure that you have

sufﬁ cient time to release the cleats

beforehand.

The cleats will not necessarily release if

you lose your balance.

Accordingly, for places and conditions

where it looks as though you may lose

balance, make sure that you have

sufﬁ cient time to release the cleats

beforehand.

If the cleats release by accident, you

may fall off the bicycle and serious

injury may result.

If the use of the multiple release mode

cleats are not sufﬁ ciently understood

or used correctly, they may release

accidentally more frequently than

single release mode cleats.

You can help to prevent this by

adjusting the amount of force required

to release the cleats in any direction,

and you should practice until you are

accustomed to the amount of force

and the angle required to release.

When you are pedaling vigorously,

your heel may inadvertently twist

outward and this may cause the cleat

to release accidentally. If the cleat

releases by accident, you may fall off

the bicycle and serious injury may

result.

This can be prevented by adjusting the

amount of force required to release

the cleats; you should practice until

you are accustomed to the amount of

force and the angle required to release

the cleats.

Note:

It is necessary to practice releasing until you become accustomed to the

technique.

* In multiple release mode, releasing by lifting your heel requires particular

practice.

Adjusting the spring tension of the pedals

Adjustment bolt

Adjustment

plate

Adjustment bolt

Decrease Increase

3mm hexagon wrench

•The spring tension of the pedals can be adjusted by turning the adjustment bolts to

adjust the spring force of the binding.

•Clicking the adjustment bolt changes the tension one step. There are four clicks per

turn.

•The adjustment bolt is located at the rear of each binding, resulting in four positions in

total. (Some models have a total of two adjustment bolts counting both pedals.)

•Adjust the spring force to the optimal cleat holding force when releasing the cleats

from the bindings.

•Equalize the cleat holding forces at four positions (two positions for some models) by

checking the adjustment plate position and counting the number of turns of the

adjustment bolts.

•Turning the adjustment bolt clockwise increases the spring tension, and turning it

counterclockwise decreases it.

Strongest position Weakest position

Adjustment

plate

Adjustment

bolt

If the adjustment plate is at the strongest or the weakest position, do not turn

the adjustment bolt any further.

Note:

•In order to prevent accidental or unintentional release from occurring, make sure

all the spring tensions are properly adjusted and check the spring tensions.

•If the spring tensions are not adjusted equally, it can cause the rider difﬁ culty to

engage or release from the pedals. The spring tension should be adjusted equally

for both the right and left pedal.

Replacement of the cleats and body cover

The cleats and body cover are consumables and need to be replaced periodically.

The cleats and body cover should be replaced at a dealer or an agency as soon as possible

after they become worn and difﬁ cult to release or can be released with much less effort

than that required when they were new.

Body cover

Produkt Specifikationer

Mærke:	Shimano
Kategori:	Cykel tilbehør
Model:	PD-ED500

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano PD-ED500 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Cykel tilbehør Shimano Manualer

Shimano FD-M8000-L Manual

4 Oktober 2024

Shimano FD-M6020-L Manual

30 September 2024

Shimano SM-RT70 Manual

16 September 2024

Shimano SM-CA70 Manual

14 September 2024

Shimano PD-M324 Manual

11 September 2024

Shimano Deore XT PD-M8120 Manual

6 September 2024

Shimano SL-3S41E Manual

5 September 2024

Shimano ST-M4000-L Manual

13 August 2024

Shimano FD-M8000-H Manual

13 August 2024

Shimano FD-M8025-H Manual

8 August 2024

Cykel tilbehør Manualer

Nyeste Cykel tilbehør Manualer

Knog Oi Luxe Manual

26 September 2024

Lezyne Trigger Drive CO2 Manual

24 September 2024

Giant Downtown Manual

14 September 2024

Knog Milk Man Manual

13 September 2024

Thule Lock Kit Manual

13 September 2024

Abus WBA65 Manual

5 September 2024

Topeak PRESSURE-RITE SHOCK ADAPTER Manual

5 September 2024

Funn Ripper Manual

2 September 2024

Funn Mamba Manual

2 September 2024

Basil Bremen Manual

31 August 2024