Shimano PD-T400 Manual


Læs nedenfor 📖 manual på dansk for Shimano PD-T400 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
SHIMANO CLICK'R Pedals
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on installation,
adjustment, and replacement of the products which are not found in the user's
manual. A dealer's manual for professional and experienced bicycle mechanics is
available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly
before use, follow it for correct use, and store it so that it
can be referenced at any time.
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings. The
instructions are classified according to the degree of danger or damage which may
occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result in
death or serious injury.
WARNING Failure to follow the instructions could result in
death or serious injury.
CAUTION
Failure to follow the instructions could cause
personal injury or physical damage to equipment
and surroundings.
Important safety information
WARNING
In order to ensure child safety for children using this product, children should be
given instruction on the correct use after both guardians and children have fully
understood the following information. Failure to follow the provided instructions
may lead to serious injury.
Do not disassemble or modify the product. This may cause the product to not
operate correctly, and you may suddenly fall and be seriously injured.
Be careful when using pedals in competition or aggressively. The cleats may
become accidentally released from the pedals and you may fall off the bicycle.
These pedals are for recreation and so are designed to be engaged with and
released from the cleats more easily than SPD pedals.
Before attempting to ride with these pedals and cleats (shoes), make sure you
understand the operation of the engagement/release mechanism for the pedals
and cleats (shoes). SPD pedals are designed to be released only when intended.
They are not designed to be released automatically when you have fallen off the
bicycle.
Use only SPD shoes with this product. Other types of shoes may not release from
the pedals, or may release unexpectedly.
Use only SHIMANO cleats (SM-SH51/SM-SH56) and make sure that the mounting
screws are tightened securely to the shoes. Failure to securely tighten the screws
may result in a fall in which the cleats do not release.
Before attempting to ride with these pedals and cleats, apply the brakes, then
place one foot on the ground and practice engaging and releasing each cleat
from its pedal until you can do so naturally and with minimal effort.
Ride on level ground first until you become accustomed to engaging and
releasing your cleats from the pedals.
Before riding, adjust the cleat holding force of the pedals to your liking. If the
cleat holding force of the pedals is low, the cleats may become accidentally
released and you may lose balance and fall off the bicycle. If the cleat holding
force of the pedals is high, the cleats cannot be easily released.
When riding at low speed or when there is a possibility that you might need to
stop riding, (for example, when doing a U-turn, nearing an intersection, riding
uphill or turning a blind curve), release your cleats from the pedals beforehand so
that you can quickly put your feet onto the ground at any time.
Use a lighter cleat holding force for attaching the pedal cleats when riding in
adverse conditions.
Keep cleats and bindings out of dirt and debris to ensure proper engagement and
release.
Remember to check the cleats periodically for wear. When the cleats are worn,
replace them, and adjust the cleat holding force before riding and after replacing
the pedal cleats.
If the warnings above are not followed, your shoes may not come out of
the pedals when you intend or they may come out unexpectedly or
accidentally, and severe injury may result.
Reflectors have to be mounted to the bike at any time as soon as traveling on
public roads. Reflectors are sold separately for models that do not come with
reflectors equipped as standard. For information on compatible reflectors, contact
the place of purchase or a distributor.
Do not continue riding the bicycle if the reflectors are dirty or damaged.
Otherwise, it becomes more difficult for oncoming vehicles to see you.
Do not use the pedals or cleats in any way not described in the user's manual.
When the cleat and pedal are facing forwards, the cleat can be released and
engaged with the pedal.
Read the user's manual carefully for instructions on using the cleats. Failure to
follow the instructions may lead to serious injury.
Front
Read the manual and choose the correct product for your needs, based on a
consideration of bicycle type, riding terrain, and conditions. Single release mode
cleats (SM-SH51) and multiple release mode cleats (SM-SH56) are available for use
with these pedals.
Cleats such as the single release mode cleats (SM-SH52) and multiple release mode
cleats (SM-SH55) cannot be used as they lack certain features, such as stable
step-out performance and sufficient holding force. If such cleats are used, the
shoes may not come out of the pedals when you intend or they may come out
unexpectedly or accidentally, resulting in the bicycle collapsing and serious injury.
Notice
If pedaling performance does not feel normal, perform an inspection again.
If you experience any trouble with the rotating parts of the pedal, the pedal may
require adjustment. Consult your place of purchase or a distributor.
If the cage becomes damaged, it can be replaced. Consult your place of purchase
or a distributor for replacement.
Products are not guaranteed against natural wear and deterioration from normal
use and aging.
For maximum performance we highly recommend SHIMANO lubricants and
maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found,
consult your place of purchase or a distributor.
Are the fastening sections fixed securely?
Has excess play increased between the cleat and pedal due to wear?
Are there any abnormalities when the cleat engages or releases?
Are there any abnormal noises?
Names of parts
Fastening section
Cage
Reflector
Binding
Cleat types, and using the cleats
How to engage
Press the cleats into the pedal binding with an angled downward motion.
How to release
The release mode can be selected depending on the type of cleat being used.
(Check the cleat model number and color for the appropriate release method.)
UM-41V0A-006 User's Manual


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: PD-T400

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano PD-T400 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024