Shimano SB-C3000-7 Manual


Læs nedenfor 📖 manual på dansk for Shimano SB-C3000-7 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2016 by Shimano Inc. HTR
UM-06R0A-001-00 User's manual
Shifting Lever (REVOSHIFT)/Brake Lever
User's manuals in other languages are available at :
http://si.shimano.com
IMPORTANT NOTICE
Contact the place of purchase or a bicycle dealer for information on installation
and adjustment of the products which are not found in the user's manual. A
dealer's manual for professional and experienced bicycle mechanics is available on
our website (http://si.shimano.com).
Do not disassemble or alter this product.
For safety, be sure to read this user's manual thoroughly
before use, and follow it for correct use.
Important Safety Information
For replacement information, contact the place of purchase or a bicycle dealer.
WARNING
Each bicycle may handle differently depending on the product. Therefore, it is
important to completely understand and get used to the operation of your
bicycle's brake system (including brake lever pressure and bicycle control
characteristics). Improper use of your bicycle's brake system may result in a loss of
control or a fall, which could lead to severe injury. For proper operation please
consult a professional bicycle dealer, or read the owner’s manual. It is important
to ride your bicycle and practice braking operation and other basic features, etc.
If the front brake is applied too strongly, the wheel may lock and the bicycle may
fall forward, and serious injury may result.
Always make sure that the front and rear brakes are working correctly before
riding the bicycle.
The required braking distance will be longer during wet weather. Reduce your
speed and apply the brakes early and gently.
If the road surface is wet, the tires will skid more easily. If the tires skid, you may
fall off the bicycle. To avoid this, reduce your speed and apply the brakes early and
gently.
Check the brake cable for rust, fraying, and cracks, and contact the place of
purchase or a bicycle dealer if any such problems are found. Otherwise, the brakes
may not work correctly.
After reading the user's manual carefully, keep it in a safe place for later
reference.
CAUTION
Be sure to shift the shifting lever one gear at a time. During shifting, reduce the
force being applied to the pedals. If you try to force operation of the shifting
lever or perform multi-shifting while the pedals are being turned strongly, your
feet may come off the pedals and the bicycle may topple over, which could result
in serious injury.
Using the shifting lever to multi-shift to a light gear may also cause the outer
casing to spring out of the shifting lever. This does not affect the capabilities of
the shifting lever because the outer casing returns to the original position after
shifting.
Note
Products are not guaranteed against natural wear and deterioration from normal
use and aging.
For maximum performance we highly recommend Shimano lubricants and
maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found with
the following items, contact the place of purchase or a bicycle dealer.
Is gear shifting carried out smoothly?
Are the setting lines of the cassette joint in the correct position?
Do any abnormal noises occur during operation?
Do the front and rear brakes work correctly?
Does the brake lever have sufficient freeplay?
Does the brake cable have any rust, fraying, or cracks?
Are there any abnormal noises?
Names of parts
Cassette joint Shifting lever
(REVOSHIFT)
Checking cable adjustment
Change the setting of the shifting lever from X to Y. To avoid over-shifting, change
the setting gradually and with minimal force.
After changing the setting, check that the yellow setting lines on the cassette joint
bracket and pulley overlap. If the overlapping area falls short of two thirds of each
setting line, consult a dealer or an agency.
If you over-shift, the setting line will not return to the proper position, and the
setting lines may not be aligned at the correct position.
Riding the bicycle with the setting lines misaligned may cause the gears to not
engage properly during pedaling, causing abnormal noise or free spinning of the
pedals.
Ex.) For 8-speed
Note
X Y
For 8-speed 1 ............................ 4
For 7-speed 1 ............................ 4
For 5-speed 1 ............................ 3
1 4
Set to XSet to Y
Yellow
setting lines
The yellow setting lines on the cassette joint are
located in two places. Use the one that is easiest to
see.
When bicycle is standing up
Casse
bracket
Cassette
oint pulley
Should be aligned
The overlapping area falls short of
two thirds of each setting line.
Operation
Turn the shifting lever (REVOSHIFT) to shift to each of the gears.
To shift to higher gear.
(Pedaling becomes heavier.)
The number on the indicator increases.
To shift to lower gear.
(Pedaling becomes lighter.)
The number on the indicator decreases.
Indicator
Shifting lever
REVOSHIFT)


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: SB-C3000-7

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano SB-C3000-7 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024