Shimano SW-M9050-R Manual


Læs nedenfor 📖 manual på dansk for Shimano SW-M9050-R (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Shift Switch (MTB)
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are not
found in the user's manual. A dealer's manual for professional and
experienced bicycle mechanics is available on our website (https://si.
shimano.com).
For safety, be sure to read this “user's manual”
thoroughly before use, follow it for correct use, and
store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result
in death or serious injury.
WARNING Failure to follow the instructions could
result in death or serious injury.
CAUTION
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
Important safety information
WARNING
Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
When operating the shift switch, be careful not to allow your
fingers to be caught in the derailleur. The powerful motor which
drives the electronic gear shifting derailleur will operate
without stopping until the shifting position is reached.
Notice
Be sure to rotate the crank when carrying out any operations which are
related to gear shifting.
Be careful not to get water into the E-TUBE ports.
The components are designed to be fully waterproofed to withstand
wet weather riding conditions; however, do not deliberately place them
into water.
Do not clean the bicycle with a high-pressure washer. If water gets into
any of the components, operating problems or rusting may result.
Handle the components carefully, and avoid subjecting them to strong
shock.
Contact the place of purchase for updates of the component software.
The most up-to-date information is available on the SHIMANO website.
Do not use the thinners or harsh solvents to clean the products. Such
solvents may damage the surface. When cleaning the products, use a
cloth moistened with a neutral detergent diluted with water.
Products are not guaranteed against natural wear and deterioration
from normal use and aging.
For maximum performance we highly recommend SHIMANO lubricants
and maintenance products.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
Is gear shifting carried out smoothly?
Are the shift switches attached to the handlebars snugly?
Do any abnormal noises occur during operation?
Is the cable cap fixed securely?
When the lever is operated, is it hitting the brake lever?
Names of parts
Shift switch
Lever (Y)
Lever (X)
Cable cap
How to operate
Gear shifting operations
Be sure to rotate the crank when carrying out any operations which are
related to gear shifting. (The operation in (2) is only for 2-level gear
shifting models.)
Right-hand lever operation
The number of sprocket shifts depends on the lever stroke. To shift one
sprocket, move the lever to position (1). To shift two sprockets, move the
lever to position (2).
Lever (X): Shifts to a smaller sprocket.
Initial lever (X) position
Shifts one sprocket
Example: From the 4th to 3rd sprocket
Example: From the 5th to 3rd sprocket
(1)
(2)
(1):(1):
Quick-shifts two sprockets(2):
4 3
5 3
Lever (Y): Shifts to a larger sprocket.
(1)
(2)
Initial lever (Y) position
Shifts one sprocket
Example: From the 3rd to 4th sprocket
Example: From the 3rd to 5th sprocket
(1):(1):
Quick-shifts two sprockets(2):
4 3
5 3
Left-hand lever operation
Lever (X): Shifts to a smaller chainring.
(1) (2)
Initial lever (X) position
Lever (Y): Shifts to a larger chainring.
Initial lever (Y) position
(1) (2)
Actual behavior may differ depending on the connected components and
software version.
Shifting switches [X] and [Y] can be switched between shifting up and
down. The shifting switches can also be switched to serve as the rear
shifting switch and front shifting switch, or used for the multi-shifting
function.
* To switch the shift switches, contact the place of purchase.
UM-01X0B-000 User's Manual
Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2021 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: SW-M9050-R

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano SW-M9050-R stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024