Shimano WH-M9000-TL-F15-275 Manual

Shimano Ikke kategoriseret WH-M9000-TL-F15-275

Læs nedenfor 📖 manual på dansk for Shimano WH-M9000-TL-F15-275 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Apr. 2019 by SHIMANO INC. ITP
UM-48A0A-003-00 User's manual
WH-M9000-TL / WH-M9020-TL /
WH-M8000-TL / WH-M8020-TL /
WH-M8100-TL / WH-M8120-TL
User's manuals in other languages are available at :
http://si.shimano.com
IMPORTANT NOTICE
Contact the place of purchase or a bicycle dealer for information on installation
and adjustment of the products which are not found in the user's manual. A
dealer's manual for professional and experienced bicycle mechanics is available on
our website (http://si.shimano.com).
Do not disassemble or alter this product.
For safety, be sure to read this user's manual thoroughly
before use, and follow it for correct use.
Important Safety Information
For replacement information, contact the place of purchase or a bicycle dealer.
WARNING
Check that the wheels are fastened securely before riding the bicycle. If the
wheels are loose in any way, they may come off the bicycle and cause serious
injury.
The tires should be inflated to the pressure indicated on the tires or rims before
use. If the maximum pressure is prescribed on the tires and rims, be sure not to
exceed the lower value shown.
WH-M9000-TL: Maximum pressure = 2.8 bar / 41 psi / 280 kPa
WH-M9020-TL: Maximum pressure = 2.6 bar / 38 psi / 260 kPa
WH-M8000-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa
WH-M8020-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa
WH-M8100-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa
WH-M8120-TL: Maximum pressure = 2.5 bar / 36 psi / 250 kPa
A higher pressure than indicated can cause a sudden puncture and / or sudden release of
the tire, which can result in serious injury.
Before riding the bicycle, carefully check the wheels to make sure that there are no
cracks in the axles; if there is any sign of a crack or any other unusual condition, DO
NOT use the bicycle. This wheel is not designed for downhill bicycle riding or
freeriding. Depending on the riding conditions, the wheel axle could develop cracks.
This could result in the failure of the wheel axle, which can lead to an accident
resulting in serious injury or even death.
Before riding the bicycle, check the wheels to make sure that there are no bent or
loose spokes, dents, scratches or cracks on the rim surface. Do not use the wheel if
any of these problems are found. The wheel may break, and you may fall. Check
also that there is no carbon separation or cracking.
Do not use with rim brakes. These wheels are designed exclusively for use with
disc brakes. They are not compatible with rim brakes.
After reading the user's manual carefully, keep it in a safe place for later
reference.
<E-THRU Axle Type Wheel>
Make sure that, even if the axle release lever is securely
tightened, the axle release lever does not interfere with
the disc brake rotor. If the axle release lever is on the same
side as the disc brake rotor, there is a possibility they may
interfere. If it interferes with the disc brake rotor, stop
using it and consult a place of purchase or a distributor.
Axle
elease
ever
isc brake
otor
Check how to use the axle release lever. If the axle release lever is not used
correctly, the wheel may come off the bicycle and serious injury could result.
<F15 E-THRU Axle Type Wheel>
This wheel can be used in combination with the special front fork and the E-THRU.
If used in combination with any other front fork or through axle, it may cause the
wheel to become detached from the bicycle while riding and result in serious
bodily injury.
When installing the front wheel to the front suspension fork, always be sure to
follow the directions given in the owner's manual for the front suspension fork.
The securing method and tightening torque for the front wheel both vary
depending on the type of front suspension fork being used. If the instructions are
not followed, the front wheel may fall out of the front suspension fork and
serious injury may occur.
<Quick Release Type Wheel>
Make sure that, even if the quick release lever is tightened
as much as possible by hand, the quick release lever does
not interfere with the disc brake rotor. If the quick release
lever is on the same side as the disc brake rotor, there is
the danger that it may interfere with the disc brake rotor.
If it interferes with the disc brake rotor, stop using it and
consult a place of purchase or a distributor.
Quick
elease
lever
Disc
brake
rotor
CAUTION
If you will be using a puncture repair agent, consult the place of purchase or a
distributor.
Burn-in period
Note that disc brakes have a burn-in period. Disc brakes have a burn-in period,
and the braking force will gradually increase as the burn-in period progresses.
Make sure that you are aware of any such increases in braking force when using
the brakes during the burn-in period. The same thing will happen when the brake
pads or disc brake rotor are replaced.
Notice
For the use of the attached nipple wrench tool, ask the place of purchase or the
distributor.
Special nipple wrenches are available as optional accessories.
Do not apply any oil to the inside of the hub. Otherwise the grease will come out.
We recommend that you ask bicycle dealers to adjust the spoke tensions if there is
any deviation in the spokes and after the first 1,000 km of riding.
Do not use detergent or other chemicals when wiping the wheel, otherwise the
sticker on the rim or the paint may come off.
Products are not guaranteed against natural wear and deterioration from normal
use and aging.
For maximum performance we highly recommend Shimano lubricants and
maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found with
the following items, contact the place of purchase or a bicycle dealer.
Are there any cracks in the wheel axle?
Are there any bent or loose spokes?
Are there any dents, scratches, or cracks on the rim surface?
Are the wheels fixed?
Do the wheels rotate smoothly?
Is there any noise from the wheels?
Names of parts
Front hub
Axle release lever Axle release lever
Rear freehub
F15 R12
Quick release lever
Hub


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: WH-M9000-TL-F15-275

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano WH-M9000-TL-F15-275 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024