Sonic Alert SBP100 Manual


Læs nedenfor 📖 manual på dansk for Sonic Alert SBP100 (1 sider) i kategorien Alarmen ringer. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
.
SONIC ALERT'S 1 YEAR LIMITED WARRANTY
The Sonic Boom Alarm Clock Model SBP100 is warranted
against manufacturing defects in materials and workmanship
for one (1) year from the date of purchase. Within this
period Sonic Alert will repair or replace at our option the
SBP100 without charge for parts and labor. Simply send the
SBP100 (postpaid) and a copy of your sales slip as proof of
purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
Sonic Shaker Portable Vibrating Alarm Clock
Model SBP100
GENERAL DATA
Power: DC 3V(1.5Vx2 pieces AA SIZE) &
DC1.5V (1.5Vx1 pieces AA A SIZE)
11
8
1
2345
9
6
7
1. ALARM ON/OFF
2. TIME SET
3. ALARM SET
4. HOUR
5. MINUTE
6. ALARM MODE SWITCH
7. SNOOZE & LIGHT BUTTON
8. ALARM INDICATOR
9. PM INDICATOR
10. BATTERY COMPARTMENT
11. TEST BUTTON
INSTALLATION
(See diagram for additional directions for settings)
1) HOW TO INSTALL BATTERIES
1.1 Remove the BATTERY COMPARTMENT (10), insert 1 AAA
battery for the clock and insert 2 AA batteries for the vibrator /
alarm.
1.2 To insert the batteries, please observe the correct position of the
polarity, as marked inside the battery compartment.
2) WHEN TO REPLACE BATTERIES
2.1 When the LCD screen becomes dim, it is time to change the AAA
battery.
2.2 When alarm sound quality becomes poor or volume is low or the
vibrator is vibrating very slow, it is usually an indication of weak
batteries. Replace the weak batteries to avoid any possible leakage.
3) MAINTENANCE
3.1 If the unit is not used for long period of time, remove all batteries
to avoid any possible leakage.
3.2 When traveling with this unit it is advised to remove the batteries
for the vibrator/alarm (2 AA size) to avoid draining the batteries
in the event light button is accidentally pressed during travel.
SETTING CLOCK TIME AND ALARM TIME
(see diagrams)
4) SETTING CLOCK TIME
4.1 Press and hold the TIME SET button (2), then press the Hour
button (4) until the correct hour is displayed. Remember to set the
correct AM or PM. When PM time is registered, a "P"(9) will
appear on the display.
4.2 Press and hold the TIME SET button (2), then press the Minute
button (5) until the correct time is displayed.
5) SETTING ALARM TIME
5.1 Press and hold the ALARM SET button (3), then press the Hour
button (4) until the correct hour is displayed. Remember to set the
correct AM or PM. When PM time is registered, a "P"(9) will
appear on the display.
5.2 Press and hold the ALARM SET button (3), then press the Minute
button (5) until the correct time is displayed.
ALARM OPERATION (see diagrams)
6) Set the alarm time as indicated in Setting Alarm Time.
6.1 Set the Alarm ON/OFF Switch (1) to ON. Alarm indicator will
appear in the top center of the display (8) indicating the alarm
function is on. The alarm is now set to turn on automatically at
the selected time.
6.2 You can select the alarm mode for waking, i.e. buzzer, vibrator, or
buzzer and vibrator by setting the Alarm Mode Switch (6) to your
desired position.
6.3 With the alarm sounding, press the ALARM OFF (3) to turn off
the alarm. The alarm comes on again the next day at the same
time.
6.4 With the alarm sounding, press the Snooze Button (7) after the
alarm sounds, the alarm will go off and will come on again in
approximately 4 minutes. You may repeat this cycle as many times
as desired.
6.5 To stop the alarm permanently set the Alarm ON/OFF Switch (1)
to OFF.
Night Light (see diagram)
7) To read the clock time in the dark, press and hold the Light /
Snooze Button (7).
Test Button
8) The test button (11) is used to demonstrate the buzzer
and vibrator without setting the alarm. To use the test
button, slide the function switch to the desired position
i.e. buzzer, vibrator or buzz/vib and press the test button
to experience the buzzer or the vibrator.
PORTABLE VIBRATING ALARM CLOCK SBP100
DIAGRAMS & OPERATING INSTRUCTIONS
IMPORTANT - Please read these instructions carefully
before use and retain for future reference.
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
1-800-566-3210 V/TTY
www.SonicAlert.com
093-BP100-003
MODEL: SBP-100 093-BP100-003 30-08-06 SIZE: (96.00 x285.00) MM
10


Produkt Specifikationer

Mærke: Sonic Alert
Kategori: Alarmen ringer
Model: SBP100

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonic Alert SBP100 stil et spørgsmål nedenfor, og andre brugere vil svare dig