Sony MRW62E-S1 Manual

Sony Ikke kategoriseret MRW62E-S1

Læs nedenfor 📖 manual på dansk for Sony MRW62E-S1 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

Overview

The MRW62E-S1 (hereafter referred to as the “reader/writer”)

has the following features:

sQuick and simple data transfer - easily transfer images from

camera to PC

sCompatible with “Memory Stick,” “Memory Stick PRO,”

“Memory Stick Duo,” CompactFlash, Microdrive, xD-Picture

Card, SmartMedia, MultiMediaCard, SD Memory Card

sSupports 17 different types of memory cards

sDrive Letter Recognition Software can be downloaded from

the web site

sQuick to Connect - Hot-pluggable USB-powered design

System Requirements

The reader/writer requires the following minimum system

configuration:

• OS

– Windows® 7

– Windows Vista®

– Windows® XP Home or Professional

– Windows® 2000 Professional (Service Pack 4 or later)

– Windows® Me

– Mac OS X 10.1.2 or later

This product works with the standard drivers in Windows.

Supported Media

The reader/writer supports the following media:

“Memory Stick” media

• “Memory Stick” (without MagicGate) *1

• “MagicGate Memory Stick” *1*2

• “Memory Stick” (with MagicGate) *1*2*3

• “Memory Stick Duo” (without MagicGate) *1

• “MagicGate Memory Stick Duo” *1*2

• “Memory Stick Duo” (with MagicGate) *1*2*3

• “Memory Stick PRO” *2*3

• “Memory Stick PRO Duo” *2*3

• “Memory Stick PRO-HG Duo” *2*3

• “Memory Stick Micro” (“M2”) *2*3*4*5

*1 “MagicGate” is the general name of a copyright protection technology

developed by Sony.

*2 Recording or playback of MagicGate data that uses MagicGate

technology is not supported.

*3 4-bit parallel data transfer is supported. It, however, varies depending

on each medium how long it takes to read/write data.

*4 “M2” is an abbreviation of “Memory Stick Micro.” In this document,

hereinafter, the abbreviation “M2,” is used.

*5 With adaptor (not supplied) only

SD memory cards

• SD/SDHC Memory Card *6

• mini SD™ card *6*7

*6 Recording or playback of data that uses SD technology is not

supported

*7 With adaptor (not supplied) only

Other memory cards

• MultiMediaCard *8

• RS-MMC *8

• CompactFlash®

• Microdrive®

• SmartMedia™

• xD-Picture Card™

*8 MMCplus and MMCmobile are supported, but parallel data transfer is

not supported.

*9 The Microdrive requires more power than other memory cards. When

using a Microdrive, remove other memory cards; otherwise an error

may occur due to a shortage of power.

Notes

• Not all memory cards are guaranteed to work. Operation is

not assured if non-supported memory cards are used.

• The capacity of a file to be recorded/played back is smaller

than 4 GB per file according to the specifications of the file

system incorporated in “Memory Stick.”

• Although operation check of this product has been performed

with up to 8 GB “Memory Stick,” please note that the

operation is not guaranteed for every type of “Memory Stick.”

• In this manual, all types of media listed in “Supported Media”

are generically called memory cards.

• I/O cards that are not memory cards, such as GPS cards, are

not supported.

• MultiMediaCards and SD Memory Cards use the same slot, so

you cannot use them at the same time.

• The “Memory Stick” media all use the same slot, so you

cannot use them at the same time.

• Only DOS format is supported. Memory cards in other

formats are not supported.

About Memory Stick

What is “Memory Stick”?

“Memory Stick” is a compact-size IC recording medium with a

large capacity. It has been designed not only for exchanging/

sharing digital data among “Memory Stick” compliant products,

but also for serving as an insertable/removable external storage

medium that can save data.

Notes on “Memory Stick”

On formatting (initialization)

• If you format a medium in which data has been already

written, all the data and software will be erased. Please be

cautious not to mistakenly erase any important data.

• Please make sure to format (initialize) a medium with the

formatter of a “Memory Stick” compliant product. If it is

initialized with Windows Explorer, a FORMAT ERROR

occurs, and data on the medium can no longer be used by this

product.

About the size of “Memory Stick”

• This product has a slot that can take both standard size and

Duo size. All the products with such a slot as this are

equipped with a system which automatically measures the

size of an inserted medium. That’s why both standard-size

“Memory Stick” and smaller “Memory Stick Duo” can be

used on this product without any Memory Stick Duo

Adaptor.

• Do not insert multiple “Memory Sticks” at the same time. It

might cause damage to the product.

• When you use “Memory Stick Duo” on this product, please

make sure to insert it in the right direction.

• “Memory Stick Duo” should be kept away from small

children to prevent them from accidentally swallowing it.

• When you use “Memory Stick Micro” on this product, please

make sure to attach the medium into M2 adaptor.

If you attempt to insert “Memory Stick Micro” without

attaching to M2 adaptor, there is a possibility that it cannot be

pulled out.

Usage Notes

“Memory Stick” Media

Notes on using “Memory Stick” media

• Do not remove “Memory Stick” while data is being read or

written.

• Data may be damaged if:

– You remove “Memory Stick” or disconnect the USB cable

while data is being read or written.

– You use “Memory Stick” in a place where it is susceptible

to static electricity or electric noise.

• You can keep backup copies of important data on a “Memory

Stick.”

• Avoid touching the metal terminals on the “Memory Stick” to

prevent damage from static discharge.

• Do not subject the “Memory Stick” to excessive stress or

shock.

• Do not disassemble or modify “Memory Stick.”

• Keep “Memory Stick” and other media away from water,

excessive heat and humidity, and from corrosive elements.

• Do not use or keep “Memory Stick” under an unfavorable

condition as below:

– Extremely hot place (such as in a parked car with windows

closed in summer, a spot under direct sunlight, or near an

electrical appliance that radiates heat)

– Humid place

– Place near corrosive substances

• If you set Write-Protected switch “LOCK,” data cannot be

recorded, edited, or erased.

• Do not stick anything other than the supplied labels on the

label area of “Memory Stick.”

• Stick a label precisely within the label area. Make sure that the

label does not go beyond the area.

• Carry and keep “Memory Stick” in the supplied case.

Notes on using “Memory Stick Duo/Memory

Stick PRO Duo”

• When you use “Memory Stick Duo/Memory Stick PRO Duo”

without Write-Protected switch, be careful not to edit or erase

important data by mistake.

• When you use “Memory Stick Duo/Memory Stick PRO Duo”

with Write-Protected switch, data cannot be recorded, edited,

or erased by “LOCK” the switch.

• Use an object with a sharp tip to move the Write-Protected

switch.

• Do not press on the memo area strongly when writing.

• Carry and keep “Memory Stick” in the supplied case.

SmartMedia Cards

Supported SmartMedia cards

The reader/writer supports 3.3-volt and 3-volt SmartMedia

cards, but not the older 5-volt type.

Note

Do not insert a 5-volt SmartMedia card into the reader/writer

forcibly.

SmartMedia card handling

If the gold contact area of a SmartMedia card is dirty, a read

error may occur. Keep the contact area clean. Otherwise do not

touch the gold contact area. Do not twist or warp the card.

Protect the card from static electricity.

SmartMedia card with ID

The reader/writer does not support the ID information on

SmartMedia cards, but allows any SmartMedia card with an ID

to be used as regular media.

Other Points to Note

Media formatting

Do not format (initialize) memory cards with a computer. If you

format a memory card with a computer, devices such as digital

cameras may not be able to use it due to differences in format

type (FAT size, cluster size, hard disk type, or super floppy disk

type). If you use a digital camera, format memory cards with

your camera, instead.

Restrictions on DOS mode

In Windows, the reader/ writer does not operate in DOS mode.

To use the reader/writer, start up Windows.

Standby

The reader/writer supports standby functions based on the

PC2000 standard, which may not cover the standby function of

all computers. Disable the standby function of your computer if

it causes any problems. While the computer is in standby, do not

insert or remove any media.

Antivirus software

If you have memory-resident antivirus software on your

computer, the computer may hang or become unusually slow. In

this case, set your anti-virus software so it does not scan the

media in the reader/writer.

Do not attempt to dismantle, repair, or alter the

reader/writer yourself

Do not, under any circumstances, attempt to dismantle, repair,

or alter the reader/writer yourself. You may not only

permanently damage the reader/writer and/or your computer,

but may also cause fire or personal injury through electrical

shock.

Operating and storage environments

• Do not place the reader/writer close to heat sources or in

direct sunlight; in dusty, dirty, or humid locations; under

precipitation such as rain; or leave it in a vehicle with the

windows closed.

• If the reader/writer interferes with the reception of radio or

television signals, move the reader/writer away from the

radio or television.

• When using the reader/writer, do not wrap it in cloth, sheets,

or covers as this may cause a malfunction or fire.

Specifications

USB transfer rate

Full-speed (12 Mbps)

High-speed (480 Mbps)

This high-speed transfer rate is a theoretical value for the USB

standard.

Actual performance is dependent on the device.

Power requirements

4.75 to 5.25 V DC

Current consumption

Max. 500 mA *1

Access indicator

Always lit.

Blinks on access.

Operating environment

Temperature: 5 to 40 °C (41 to 104 °F)

Humidity: 30 to 80% RH

Storage environment

Temperature: -30 to + 60 °C (-22 to +140 °F)

Humidity: No condensation

Dimensions (W x H x D)

Approx. 86 × 15.7 × 50 mm

(3 3/8 ×5/8 × 2 inches) (excluding protrusions)

Mass

Approx. 57 g (2 oz.) (TYP)

*1 Except when using Microdrive

End User License Agreement

IMPORTANT NOTICE

The following “END USER LICENSE AGREEMENT” applies to

the Drive Letter Recognition Software provided by Sony. Please

read the following “END USER LICENSE AGREEMENT” before

installing. By installing the Drive Letter Recognition Software,

you agree to the “END USER LICENSE AGREEMENT”.

END USER LICENSE AGREEMENT

This is a legal agreement between you

(hereafter referred to as the User) and Sony Corporation

(hereafter referred to as Sony) pertaining to the right to use the

software (hereafter referred to as the PROGRAM). Using the

PROGRAM indicates your acceptance of these terms and

conclusion of the Agreement between the User and Sony.

1 Copyright and all other rights relating to the PROGRAM and

documents accompanying the PROGRAM are owned by Sony

or the original rightful person or organization (hereafter

referred to as the original rightful person) granting Sony the

right to use the PROGRAM. The User is granted no rights

other than those specified in this agreement.

2 Sony grants the User the non-exclusive, indivisible and non-

transferable right to use the PROGRAM for the purpose of

using the Sony product Multi-Card Reader/Writer for which

the PROGRAM designates.

3 The User may not transfer the Right of Use described above to

any third party nor allow for any third party to use the

PROGRAM unless the User obtains the advance written

permission of Sony.

4 The User may not export or transport the PROGRAM or

documents accompanying the PROGRAM from the country

where the User installed the PROGRAM to any other country.

5 The User may not (i) update, add to, or modify nor (ii) de-

assemble or de-compile the PROGRAM either in whole or in

part.

6 THE PROGRAM IS PROVIDED “AS IS” WITHOUT EXPRESS

OR IMPLIED WARRANTIES, INCLUDING WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE OR NON-DEFECTIVENESS.

7 If any dispute relating to infringement of copyright, patent, or

other intangible property rights arises between the User and a

third party as a consequence of use of the PROGRAM, the

User shall settle the dispute at the User’s own expense, and

shall make no claim against Sony or the original rightful

person.

8 Sony may terminate your license upon notice for failure to

comply with any of these Terms. Any such termination shall

not affect any payments, any compensation for damage. Upon

termination, you must immediately destroy the Software

together with all copies in any form.

9 This Agreement has several non-English language versions

for the reference purpose only. In the event of any

discrepancy between the English language version and any

other language version, the English language version shall

prevail.

Package Contents

When you unpack the box, make sure that it contains all the

accessories listed below.

If anything is missing or damaged, contact your retailer.

• MRW62E-S1 Multi-Card Reader/Writer

• USB cable

• Operating Instructions

• Warranty Card

Parts and Functions

Front

1Access Indicator

This indicator is always lit. The indicator blinks when the

reader/writer accesses data on a memory card.

2SmartMedia / xD-Picture Card Slot

Insert either a SmartMedia memory card or xD-Picture Card

here.

3CompactFlash / Microdrive Slot

Insert either a CompactFlash or Microdrive memory card

here.

Remove all other memory cards before using a Microdrive,

because of its large power consumption.

4“Memory Stick” Slot

Insert a “Memory Stick” media here.

When inserting a “Memory Stick Micro” (“M2”), use an

adaptor (not supplied).

5MultiMediaCard / SD Memory Card Slot

Insert either a MultiMeidaCard or an SD Memory Card here.

When inserting a miniSD Card, use an adaptor (not

supplied).

Rear

6USB Port (mini B)

Connect to a computer using the supplied USB cable.

Owner’s Record

The model and serial numbers are located on the bottom of the

reader/writer. Record the serial number in the space provided

below. Refer to these numbers whenever you call upon your

Sony representative regarding this product.

Model No. MRW62E-S1

Serial No.

WARNING

Keep the unit away from children. If any part of the

unit is swallowed, promptly see a doctor.

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Caution

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority to

operate this equipment.

Note

If you have any questions about this product, you may call the

telephone number listed in “Technical Support.” The telephone

number below is not for customer service but only for official

purposes.

Declaration of Conformity

Trade Name: SONY

Model No.: MRW62E

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego, CA 92127

U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.

NOTICE TO USERS

Software described herein, in whole or in part, may not be

reproduced, translated to any machine-readable form without

prior written approval from Sony Corporation.

IN NO EVENT SHALL SONY CORPORATION BE LIABLE

FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL

DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR

OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH

THIS MANUAL, THE DEVICE DRIVERS OR OTHER

INFORMATION CONTAINED HEREIN OR THE USE

THEREOF.

Sony Corporation reserves the right to make any modification to

this manual or the information contained herein at any time

without notice.

SONY CORPORATION IS NOT RESPONSIBLE FOR ANY

DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA, OR

OTHER INFORMATION STORED ON ANY MEDIA.

audio/video for any other purpose than personal enjoyment.

Please be warned that the “Memory Stick” containing images

and data protected by copyright shall be strictly used within

Trademarks

• , “Memory Stick,” “Memory Stick Duo,” “MagicGate

Memory Stick,” “Memory Stick PRO,” “Memory Stick PRO

Duo,” “Memory Stick PRO-HG Duo,” “Memory Stick Micro,”

and “M2” are registered trademarks or trademarks of Sony.

• Microsoft®, Windows®, and the Windows logo are trademarks

or registered trademarks of Microsoft Corporation in the

United States of America and/or other countries.

• Macintosh® and Mac OS® are registered trademarks of Apple

Computer, Inc. in the United States of America and/or other

countries.

• Other system names, product names, and company names

appearing in this manual are trademarks or registered

trademarks of their respective holders, even though not

indicated by the ® or ™ marks.

2-694-866-14 (2)

Operating Instructions

Before operating the unit, please read this document

thoroughly, and retain it for future reference.

Multi-Card

Reader/Writer

http://www.sony.net/

MRW62E-S1

Terminal

Label area

Write-Protected

switch

3.3 V and 3 V type 5 V type

Notch

Terminal

Memo area

Write-Protected

switch

Produkt Specifikationer

Mærke:	Sony
Kategori:	Ikke kategoriseret
Model:	MRW62E-S1

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony MRW62E-S1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sony Manualer

11 Oktober 2024

11 Oktober 2024

11 Oktober 2024

11 Oktober 2024

11 Oktober 2024

11 Oktober 2024

11 Oktober 2024

10 Oktober 2024

10 Oktober 2024

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer VP-8X8 Manual

25 November 2024

Kramer PT-2C Manual

25 November 2024

Lazer Bob+ Manual

25 November 2024

Dometic DPS 80 Manual

25 November 2024

Kramer 102MX Manual

25 November 2024

Kramer FC-18 Manual

25 November 2024

Kramer DSP-62-UC Manual

25 November 2024

Kramer KC-BRAINware-25 Manual

25 November 2024

Kramer KC-BRAINware-50 Manual

25 November 2024

Tiger SKF-H101 Manual

25 November 2024