Sony Walkman NWZ-F887 Manual

Sony Mp3 speler Walkman NWZ-F887

Læs nedenfor 📖 manual på dansk for Sony Walkman NWZ-F887 (4 sider) i kategorien Mp3 speler. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
Quick Start Guide
©2013 Sony Corporation Printed in Malaysia
Contents
Please check the items in the package.
“WALKMAN” (1)
Headphones (1)
Earbuds (1 set)
USB cable (1)
Quick Start Guide (this manual)
About the Operating System
Make sure that the OS is Windows XP*1 (Service Pack 3 or later), Windows
Vista*2 (Service Pack 2 or later) or Windows 7*2 (Service Pack 1 or later), or
Windows 8.
*1 Excluding 64-bit OS versions.
*2
[Compatibility mode] for Windows XP is not supported.
For a Mac computer, make sure that the OS is Mac OS X v10.6 or later.
Not supported by OSs other than above
NWZ-F886/F887
About the manuals
In addition to this Quick Start Guide, this model is accompanied by both
an excerpted version and a full version of the Help Guide that give more
detailed operating instructions.
Help Guide (Excerpted version):
You can view the Help Guide (Excerpted version) on a computer screen.
For details, see “How to Install the WALKMAN Guide and Media Go (for
Windows) or “How to Install the Help Guide and Content Transfer (for
Mac).
Help Guide (Full version):
You can access the full version of the Help Guide from the following URL.
When you view it with your Walkman, see “How to Use the Help Guide
on Your “WALKMAN”.
http://rd1.sony.net/help/dmp/nwzf880/h_ww/
Note
You can turn up the volume beyond the specific level after canceling the
alarm and warning.
After the initial warning, the alarm and warning repeat for every 20
cumulative hours that the volume is set beyond the specific level; when this
happens, the volume is changed to the initial setting automatically.
If the volume is set beyond the specific level and you turn off your Walkman,
the volume returns to the specific level automatically.
Initial Settings
1 Use the supplied USB cable to connect your
Walkman to a running computer and charge
the Walkman.
Your Walkman turns on.
Note
If a large battery symbol is displayed while
you are charging your Walkman, the
remaining charge is still too low for the
Walkman to operate. The Walkman will
start automatically after being charged for
about 10 minutes.
2 If the USB connected screen appears, tap
to quit the screen, and then proceed to the
initial settings.
The language selection screen* appears.
* Depending on where you purchased your Walkman, the language
selection screen may not appear.
3 Select the desired language to be used to
display the End User License Agreement.
4 Make sure that you understand the terms of
the license agreement then tap [Agree].
The initial setup screen appears.
5 Tap .
6 Select the desired language.
7 Tap to begin using your Walkman.
8 Set the Wi-Fi connection, Google account
and date/time, etc., following the
instructions shown on the screen.
Hint
Wi-Fi connection and Google account can also be set afterwards.
4-472-608- (1)11
How to Install the Supplied Software
How to Use Your WALKMAN
Parts and Controls
Note on the Noise Canceling feature
The Noise Canceling feature is only available when the headphones
supplied or headphones with a Nosie Canceling feature are used. The
headphones supplied are a model exclusively provided for your
Walkman.
Screen (touch screen)
Touch (tap) icons, items, etc., on the screen to operate your Walkman.
Built-in microphone
Headphone jack
WM-PORT jack
Connect the USB cable (supplied), or other accessories that support
WM-PORT (not supplied).
Strap hole
Built-in antenna
Wi-Fi, Bluetooth, and GPS antennas are built-in.
VOL (Volume) +/– button
button
Skip to the next music track, the next chapter of a video, or a scene
playing 5 minutes later. If you press and hold the button, tracks or videos
are fast-forwarded.
button
Play back or pause music tracks or videos.
button
Skip to the previous music track, the previous chapter of a video, or a
scene that played 5 minutes ago. If you press and hold the button, tracks
or videos are fast-rewinded.
RESET button
Press the RESET button with a pen or paper clip, etc., to reset your
Walkman.
(Power) button
Press: Turns the power on or the screen on/off.
Press and hold: Turns the power off.
Note
Your Walkman will be reset if you press and hold the button for about 8
seconds.
mark
Touch a Bluetooth device equipped with the NFC feature to this mark.
Speaker
About volume operation (Only for
countries/areas complying with
European Directives)
An alarm (beep)* and warning [Check the volume level] are meant to
protect your ears when you raise the volume setting beyond a specific
level for the first time. You can cancel the alarm and warning by tapping
[OK] on the alert dialog.
* The alarm (beep) does not sound when connecting a Bluetooth audio
device.
How to Install the WALKMAN Guide
and Media Go (for Windows)
1 Connect your Walkman to a running computer using
the supplied USB cable. Plug in the USB cable with
facing upward, making sure the connection is secure.
Hint
If [USB connected] appears on the screen, tap [Turn on USB storage] to
connect your Walkman.
If the following screen does not appear, swipe the status bar on the top
of the screen and tap [Turn on USB storage] on the notification panel.
Status bar
You can access your Walkman from the computer.
2 Select the following order with the computer.
Windows 7 or earlier: Select [Start] – [Computer] or [My Computer]
– [WALKMAN] – [FOR_WINDOWS].
Windows 8: Select [Desktop] from [Start screen] to open [File
Explorer]. In the [Computer] list, select [WALKMAN] – [FOR_
WINDOWS].
3 Double-click [Setup.exe].
The install wizard appears.
Hint
When you execute [Setup.exe], the [Setup.exe] file stored in the [FOR_
WINDOWS] folder of your Walkman is copied to your computer for
backup, and WALKMAN Guide and Media Go are installed to your
computer.
If you changed the type of USB connection to a setting other than MSC
mode, change mode back to MSC mode again by tapping [Connected as
USB Storage] on the notification panel.
If [Setup.exe] does not start, copy the [Setup.exe] file to your desktop,
then double-click it.
4 Follow the on-screen instructions.
After the install wizard finishes, the WALKMAN Guide and Media Go
shortcuts appear on the desktop of your computer.
The Help Guide is included in the WALKMAN Guide.
How to Install the Help Guide and
Content Transfer (for Mac)
1 Connect your Walkman to a running computer using
the USB cable (supplied).
2 On the computer, select [WALKMAN] in the sidebar of
Finder, then open the [FOR_MAC] folder.
3 Double-click the installer icon of the desired software:
To install the Help Guide: [Help_Guide_Installer_for_Mac]
To install the Content Transfer software: [ContentTransfer.pkg]
4 Follow the on-screen instructions.
After the installer finishes, the alias (shortcut) of the installed software
(Help Guide or the Content Transfer software) appears on the desktop
of your computer.
Hint
Before you attempt to delete the software from your Walkman, copy the
[FOR_MAC] folder to your Mac computer as a backup if necessary.


Produkt Specifikationer

Mærke: Sony
Kategori: Mp3 speler
Model: Walkman NWZ-F887

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony Walkman NWZ-F887 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mp3 speler Sony Manualer

Mp3 speler Manualer

Nyeste Mp3 speler Manualer

Difrnce

Difrnce MP860 Manual

29 September 2024
Samsung

Samsung Helix Manual

27 September 2024
Sunstech

Sunstech Troya 2011 Manual

23 September 2024
Sunstech

Sunstech FMT 110 Manual

23 September 2024
Pyle

Pyle PLDNV77U Manual

23 September 2024
Packard Bell

Packard Bell funkey fm Manual

23 September 2024
Rio

Rio Forge256MB Manual

23 September 2024
Samsung

Samsung Yepp Sports Manual

21 September 2024
Sunstech

Sunstech Asha Manual

21 September 2024
Tom-tec

Tom-tec MP 725 Manual

20 September 2024