Speco Technologies WB86T Manual


Læs nedenfor 📖 manual på dansk for Speco Technologies WB86T (1 sider) i kategorien Højttaler. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
WB86T – 70/25V Enclosed Wall Baffle Speaker
Congratulations on your purchase of Speco Technologies’ 70/25 Volt
Wall Baffle Speaker!
The continues Speco Technologies’ heritage of more than 60 years of WB86T
providing the highest quality of performance and reliability for residential and
commercial sound applications. Speco Technologies’ 70/25V wall baffle
speaker was designed with the focus of making the contractor’s work as easy
and time-efficient as possible. With a beautiful wood design, these units
converge strong specifications and installer-friendly features to bring sound
seamlessly into a commercial outdoor environment without sacrificing any
aesthetic beauty. Constructed of the finest materials, coupled with a fine-mes
integrated grille, these speakers will provide countless years of performance a
sound enjoyment to your listening environment for all occasions.
INSTALLATION INSTRUCTIONS:
1. It is important that before making any wire connections with your sp
source, amplifier and/or receiver, is completely off!
2. First, determine whether your speaker will be used in a 70 Volt, 25 Vo
3. There is a slider switch to select between 70V and 25V on the side of the speaker.
4. The transformer dial is also on the side of the speaker. Determine which wattage tap best meets the sound need of the
environment the speaker will be utilized in. A choice of 0.625, 1.25, 2.5, 5 and 10 watts is provided, with the higher
wattage settings made available for louder sound environments. Upon making your selection, carefully turn the
transformer dial to the proper setting. The transformer dial can be removed once the selection has been made. Simply
pull it outwards.
5. For an 8 ohm speaker requirement, turn the transformer dial to the 8 ohm indication. This automatically overrides the
transformer within the unit and the Voltage Selector switch.
6. Once the wattage tap is determined for the speaker, the speaker must be wired.
7. Connect the positive wire coming from your amplification source into the red push terminal on the back of the speaker.
8. Likewise, connect the black common push terminal with the common wire running back to your amplification source.
9. For a commercial application where multiple speakers are required, the speaker wire must utilize a parallel run. Never
use a series run with commercial speakers.
10. This speaker is hung using the traditional “teardrop” style hook on the back. Simply drill a screw into the wall where
you wish to install the speaker, leaving at least ¼” room. Then, slide the wide portion of the teardrop over the head of
the screw, and gently lower it.
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com
Rev. 05/06/20


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Højttaler
Model: WB86T

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies WB86T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Speco Technologies Manualer

Højttaler Manualer

Nyeste Højttaler Manualer

Defender

Defender G32 Manual

23 December 2024
Sony

Sony SS-MB200H Manual

22 December 2024
Sony

Sony SS-SPG01 Manual

22 December 2024
HK Audio

HK Audio L5-112X Manual

22 December 2024
Sven

Sven SPS-830 Manual

22 December 2024
Braun

Braun LE03 Manual

21 December 2024
Philips

Philips Fidelio FW1 Manual

21 December 2024
Philips

Philips TAPB600 Manual

21 December 2024