Speco Technologies SP525C Manual


Læs nedenfor 📖 manual på dansk for Speco Technologies SP525C (1 sider) i kategorien Højttaler. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
S
Se
er
ri
ie
es
s
2
25
5
5.25” and 6.5” Residential In-Ceiling Speakers
Speco Technologies has leveraged over 60 years of residential sound expertise in developing our core in-ceiling
speaker line, the Series 25 Audio Speaker line. Manufactured from durable and quality components, Speco
Technologies’ Series 25 Audio Speaker Line provides strong value. Enjoy the premium performance of full-range
sound in your listening environment for countless years to come.
MOUNTING INSTRUCTIONS:
1) To mount speakers, carefully select areas of the ceiling or wall where there are no obstructions,
plumbing, heating/AC apparatus or electrical wiring.
2) Determine and make absolutely sure whether in-ceiling mounting brackets are needed to
support speaker’s weight. Appropriate mounting brackets can be ordered through your
distributor. Speco Technologies assumes no liability for improperly installed speakers.
3) Use provided cutout guideline and trace cut area with a pencil on mounting location.
4) Carefully cut out the area of traced guideline, removing portion of sheet rock or ceiling tile to
expose mounting hole.
5) Run speaker wire through ceiling or wall to mounting location.
6) Make sure all amplifiers/receivers are turned off prior to connecting any speaker wire.
7) Remove speaker grille by turning the rear easy-mount tabs counter-clockwise till they stop, and
then push them upwards to pop out grille.
8) After grille is removed, connect the positive speaker wire to the red push-spring wire terminal
on the back of the speaker.
9) Connect the common wire to the black push-spring wire terminal on the back of the speaker.
10) Pay close attention to your impedance matching when wiring multiple speakers.
11) Once the speaker is wired, test the speaker at low-volume to make sure connection is strong
prior to final installation.
12) Place speaker with easy-mount tabs turned clockwise inward into the mounting hole.
13) Turn screws on outer rim of speaker face clockwise, which will result in the easy mount tabs
clamping down on the mounting surface from behind.
14) When speaker is secure, position/pivot tweeter in direction of listening area.
15) Carefully replace grille on speakers.
SPECIFICATIONS:
SP525C SP625C
Woofer 5.25” Polypropylene with rubber
surround
6.5” Polypropylene with rubber
surround
Tweeter 0.75” pivoting silk dome 1” pivoting silk dome
Power 30W RMS / 60W Max 40W RMS / 80W Max
Frequency Response 70Hz ~ 20kHz 50Hz ~ 20kHz
Sensitivity 87dB 1W/1m 89dB 1W/1m
Impedance 8 Ohms 8 Ohms
Dimensions 8” Diameter x 4” Depth 9.25” Diameter x 4.25” Depth
Mounting Dimensions 6 5/8” Diameter 7 ¾” Diameter
Weight 2.4 Lbs. 3 Lbs.
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com
Rev. 04/15/20


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Højttaler
Model: SP525C

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies SP525C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Speco Technologies Manualer

Højttaler Manualer

Nyeste Højttaler Manualer

Kramer

Kramer Galil 6-AW Manual

21 November 2024
Extron

Extron SM 28 Manual

20 November 2024
Extron

Extron SF 3CT LP Manual

20 November 2024
QSC

QSC HPR181W Manual

20 November 2024
JBL

JBL Cinema Sound CS46 Manual

20 November 2024