Star Micronics mC-Label3 Manual


Læs nedenfor 📖 manual på dansk for Star Micronics mC-Label3 (3 sider) i kategorien Etiketprinter. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Star Windows Software
The Windows driver is included in the Star Windows Software.
The Star Windows Software can be used to congure the printer
settings and perform an operation test.
Download [ Star Windows Software ].
Extract the downloaded software and execute "Setup.exe".
Follow the wizard instructions and complete software installa-
tion.
Windows
Star Quick Setup Utility
For a wired LAN connection, use the tablet that is connected to
the same network as the mC-Label3.
Install [ Star Quick Setup Utility ].
Open the configuration utility, and select [ Start Guide (Initial
Settings)] - [Search Printer].
Follow the instructions of the utility to connect and set up a tab-
let.
iOS/Android
3
Preparing/setting up the conguration app
Conguration app
download site
Driver download site for Mac / Linux environment. (https://www.star-m.jp/supportsite-wsw.html)
You can complete the settings up to start using the printer from a tablet or PC by using
the conguration app. Scan the QR code on the right side or search the app to access the
download site.
Easy Setup Guide
mC-Label3 online manual
This document explains the setup procedure for the mC-Label3. For
further instructions, please refer to the mC-Label3 online manual. Please
read the instructions before using the printer. You can also see FAQ from
the QR code on the inside of the printer.
Introduction
Easy Setup
GuideLAN Cable
MCL32CI
USB Cables Safety
Instructions
If contents are missing or damaged, please contact the reseller that sold you the printer.
What's Included
Power CableAC Adapter
This Sheet
1
Connecting a Tablet or PC
Connect an appropriate cable to the connector on the printer according to
your operating environment.
USB-C ®
            Android, Windows
You will need:
USB cable included with the printer.(C-C)
            Windows
You will need:
USB cable included with the printer.(C-A)
Communication and Recharge
2
1
Wired LAN
You will need:
LAN cable included with the printer.
Please remove the protective inside the printer and the silica gel on the part
bottom of the printer.
Before Use
2
1
3
4
5
Securely plug the power cable (for the AC adapter) fully into the AC
adapter inlet .
Connect the AC adapter plug to the power connector of the printer.
Be sure that it is oriented correctly .
Insert the power cable plug into the electrical outlet .
Press the power switch on the side of the printer .
During startup, the lighting and blinking pattern of the Power LED
changes.
Conrm that the Power LED blinks red .
2
Turning ON the Main Unit Power
For the owners of other companies’ trademarks mentioned in this document, see Trademarks in our website (https://www.star-m.jp/eng/trademarks.html).
Copyright 2023 Star Micronics Co., Ltd.
FAQ
80878872
2 1
Plug for the mC-Label3
Communication
Plug for the mC-Label3


Produkt Specifikationer

Mærke: Star Micronics
Kategori: Etiketprinter
Model: mC-Label3

Har du brug for hjælp?

Hvis du har brug for hjælp til Star Micronics mC-Label3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Etiketprinter Star Micronics Manualer

Etiketprinter Manualer

Nyeste Etiketprinter Manualer

Toshiba

Toshiba B-EX4T1-GS12 Manual

10 Oktober 2024
Bixolon

Bixolon SRP-F310 Manual

20 September 2024
Brother

Brother P-Touch 2430PC Manual

19 September 2024
Leitz

Leitz Icon MAC Manual

18 September 2024
Dymo

Dymo 2000 Manual

15 September 2024
Dymo

Dymo LetraTag Plus Manual

10 September 2024
Dymo

Dymo 4200 Kit Manual

10 September 2024