StarTech.com P011GI-NETWORK-CARD Manual

StarTech.com Netværkskort/adapter P011GI-NETWORK-CARD

Læs nedenfor 📖 manual på dansk for StarTech.com P011GI-NETWORK-CARD (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: June 1, 2023
Product Diagram
P011GI-NETWORK-CARD
Port/LED/Connector Function
1Bracket Secures the card to the Host Computer Case
The comes pre-installedFull Prole Bracket
2Open SFP Slot Add a MSA-Compliant SFP Transceiver Module
Supports or Fiber Ethernet 1 Gbps SFPs
3LED Indicators
Left LED Indicator Link Speed is
Solid Green: 1 Gbps
Right LED Indicator Link Status is
Solid Green: Active link
Flashing Green: Activity
4PCIe 2.1 p1-x1 Connector Insert into a on the PCI Express Slot Host Computer
Package Contents
Open SFP Network Card x 1
Low-Prole Bracket x 1
Quick-Start Guide x 1
2
1-Port Open SFP Gigabit Network Card
Requirements
For the latest requirements, please visit www.startech.com/P011GI-NETWORK-CARD
Host computer with an available PCI Express 2.0 or greater slot (x1, x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity PCI Express Cardscan severely damage . Ensure that you are
adequately before you open your or touch the Grounded Host Computer Case PCI
Express Card Anti-Static Strap Anti-Static Mat . You should wear an or use an when
installing any Host Computer component. If an isn’t available, Anti-Static Strap
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the by its edges and don’t touch PCI Express Card
the gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the back of the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
4. Remove the from the . Consult the documentation that Cover Host Computer Case
came with the for details about doing this safely.Host Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Host Computer Case
Note: Consult the documentation that came with the for details Host Computer
about doing this safely. This card works in PCI Express x1, x2, x4, x8, or x16 Slots.
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Host Computer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low Prole
Desktop System, it may be necessary to replace the pre-installed standard
Full Prole Bracket Low Prole Bracketwith the included .
7. Return the onto the .Cover Host Computer Case
8. Insert a compatible 1G SFP Transceiver Module SFP Slot PCI , into the onto the
Express Card.
9. Reconnect the to the back of the .Power Cable Host Computer
3
*Product may vary from image
1
4


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: P011GI-NETWORK-CARD

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com P011GI-NETWORK-CARD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter StarTech.com Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

LevelOne

LevelOne FNC-0109TX Manual

14 Oktober 2024
Legrand

Legrand CS102 Manual

9 Oktober 2024
Edimax

Edimax EW-7822ULC Manual

8 Oktober 2024
Alecto

Alecto HPD-142 Manual

4 Oktober 2024
LevelOne

LevelOne GNC-0122 Manual

4 Oktober 2024
TP-Link

TP-Link UE200 Manual

3 Oktober 2024
Tenda

Tenda W311MA Manual

2 Oktober 2024
NEC

NEC NP05LM4 Manual

30 September 2024