Vigitron Vi22601 Manual

Vigitron Netværkskort/adapter Vi22601

Læs nedenfor 📖 manual på dansk for Vigitron Vi22601 (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Application Drawing
Vi22101 802.3af/at Powered Device (PD) Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Important Safety Warning
- Use the 12VDC output to power a non-PoE device. Be sure to observe
polarity where Red is Positive & Black is Negative.
- Connect a standard Cat5/6 cable of maximum 100m in length from a PoE
switch or Midspan to the Vi22101 DATA+Poe port.
- Connect another Cat5/6 cable to the DATA port of the Vi22101 to a
non-PoE device.
PoE Switch/NVR-end Installation
- The other end of the RJ45 cable needs to be connected to a PoE capable
port of a PoE switch or a Midspan. The PoE port need to be able to provide
enought power to the Vi22101 and its connected PoE device.
- Read these instructions.
- Keep these instructions.
- Follow all instructions.
- Heed all warnings.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75°C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The mains plug is used as the disconnect device and shall remain readily
operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus should not be exposed to
dripping or splashing and no objects filled with liquids, such as vases should
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru a PoE source device.
WARNING! - The main plug or the PoE + Data are used as the
disconnect device and should remain readily operable.
The Vi22101 is a PoE splitter that is fully compliant with IEEE 802.3af
(15.4W) and IEEE 802.3at (30W) standards. When used with a PoE switch
or PoE Midspan, it separates PoE from Ethernet data and regulates the PoE
high voltage to 12VDC or 24VDC.
It is designed to power Non-PoE IP devices and can provide 12VDC up to
12W. The Vi22101 is equipped with over current protection to safeguard
connected devices and can operate at extended temperature of -40°C to
+75°C. It is compact in size and can fit easily in most camera housings. The
Vi22101 can be combined with extenders to provide remote DC power over
UTP, Coax or single pair wire at distances up to 3,000 without the need for
local power supplies.
The Vi22101 is capable of meeting the demanding power requirements for
access control, lighting, emergency phone systems and cameras with
heaters/blowers. It is an ideal solution for providing remote power to
non-PoE IP devices and save installation time and cost. Powering non-PoE devices at standard and extended distances
The Vi22101 can power a wide range of PoE devices at standard and extended distances up
to 12W.
12/24VDC
Data
Data + PoE
Extended UTP
Data + PoE
Extended Coax
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Coax
Cat 5/6
Vi2401A
Vi22101
Vi2401A
Emergency
Call Box
Emergency
Light
Vi2301A
Vi22101
Vi2301A Data + PoE
Data + PoE
Vi22101
Vi22101 LED Light
12/24VDC
Data
12/24VDC
Data
12/24VDC
Data
IP Camera
Maxii
Power
TM

Produkt Specifikationer

Mærke: Vigitron
Kategori: Netværkskort/adapter
Model: Vi22601

Har du brug for hjælp?

Hvis du har brug for hjælp til Vigitron Vi22601 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Netværkskort/adapter Vigitron Manualer

Vigitron

Vigitron Vi22601 Manual

14 Marts 2025
Vigitron

Vigitron Vi22201 Manual

14 Marts 2025
Vigitron

Vigitron Vi00024 Manual

10 December 2024
Vigitron

Vigitron Vi3305 Manual

10 December 2024

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Televés

Televés 769203 Manual

27 Februar 2025
Altronix

Altronix NetWay3024P Manual

20 Februar 2025
Altronix

Altronix NetWay4E1WP Manual

20 Februar 2025
TP-Link

TP-Link Archer TX10UB Nano Manual

4 Februar 2025
Hamlet

Hamlet HNUMF100 Manual

1 Februar 2025
Strong

Strong SW5000P Manual

31 Januar 2025
Ditek

Ditek DTK-VM12RM Manual

30 Januar 2025
Ditek

Ditek DTK-RM24EXTS Manual

30 Januar 2025
Ditek

Ditek DTK-2MHLP24BWB Manual

30 Januar 2025
Ditek

Ditek DTK-2LVLPLV Manual

30 Januar 2025