Vigitron Vi3305 Manual

Vigitron Netværkskort/adapter Vi3305

Læs nedenfor 📖 manual på dansk for Vigitron Vi3305 (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Application Drawings

Vi3305 5-Port L2 Extended UTP PoE Switch Installation Manual

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

IP Camera-end Installation

The Smart Choice for Transmission Solutions www.vigitron.com

Vigitron’s MaxiiNet™ Vi3305 fixed managed five port extended UTP PoE

switch brings new performance standards to the growing need for high

speed transmission of high speed Ethernet. It eliminates the need for local

power for the cameras connected to its 4 ports at extended distances. The

Vi3305 provides a 10/100Base-T and an SFP socket for fiber optic uplink.

The Vi3305 is powered locally by the Vi1120 to provide 802.3at to each port,

providing up to 37W (more than 802.3at) to each port or up to 74W for two

combined ports compensating for surge conditions and requirements for

high powered PoE PTZ domes.The Vi3305 can operate over UTP at

extended distances up to 3,000 feet (909m) when combined with the

Vi2301A or Vi2300A.

With an operating temperature range of -30°C to 75°C, the Vi3305 is the

perfect solution for data and power transmission for warehouses, parking

lots, campuses, casinos, and many more. The Vi3305 is MegaPixel Certified

(MPC™), type tested to network packet performance standards, and major

manufacturer compatibility tested to assure you error free, quality opera-

tions. Fixed managed L2 functions include IEEE 802.1, p Qos, support of 2k

MAC addressing, learning, aging, and a non-blocking switch fabric.

Installation cost savings, proven performance, and major camera manufac-

turer compatibility all go into making Vigitron’s MaxiiNet™ Vi3305 an ideal

solution for standard distance data and power transmission.

Important Safety Warning

Ethernet Switch/NVR-end Installation

- Read and keep these instructions.

- Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Install in accordance with the manufacturer’s instructions.

- This installation should be made by a qualified service person and should conform to all local

codes.

- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.

- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,

dripping or splashing.

- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.

- DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C or

is below - 40°C.

- Make sure that the external power supply output voltage is in the recommended range.

- Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including DVRs) that produce heat.

- Protect the power cord from being walked on or pinched particularly at power source,

convenience receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as when a power supply cord or plug is damaged, liquid

has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been dropped.

- The main plug is used as the disconnect device and shall remain readily operable.

WARNING! - To reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture. This apparatus shall not be exposed to

dripping or splashing and no objects filled with liquids, such as vases shall

be placed on the apparatus.

WARNING! - This apparatus is a Class I product. This product must

be connected to a mains socket outlet thru an AC to DC Power supply.

WARNING! - The mains plug is used as the disconnect device and

shall remain readily operable.

PoE Switches

MaxiiNet™

Uplink Connections:

There are 2 ways to connect the Vi3305 Uplink to another network switch or

NVR, either fiber optics or Standard UTP Ethernet. Only one of these ports

can be active at the time.

a) Standard Ethernet RJ45 connector

- Connect the Uplink RJ45 connector of the Vi3305 to a standard Cat5/6

cable of maximum 328 feet (100m). Connect the other end of the cable to

the Ethernet port of the other network switch.

b) Fiber optics

-If you want to use fiber optics first you need to insert a suitable SFP that

matches your fiber optic cable into the Uplink SFP socket of the Vi3305.

Then connect the fiber optics cable to the SFP. Connect the other end of

SFP to the optical connector of the other network switch.

Power Supply:

-Connect a power supply to the power input of Vi3305. If there is no need

for providing PoE on 4 ports a 12VDC power supply such as Vi0012 will be

sufficient. If PoE is required at the ports you need to select a 48-57VDC

power supply such as Vi1120 that can provide maximum PoE capacity on

all 4 ports.

Extended Ethernet Ports:

- Connect a standard Cat5, or better, UTP cable of maximum 3,000 feet

(914m) to one of the Ethernet ports. The ports will automatically configure

as 10 or 100BaseT depending on the distance.

- Use an Ethernet and PoE “Extender” such as Vi2301A or Vi2300A at the

camera side.

- Connect one end of the long Coax cable to the BNC connector of Extended

port of “Extender”.

Connecting 4 remote cameras using Coax and Fiber Optics

Network Switch

Vi3305

Power

Supply

Data

Up to 80Km

Powering 4 remote cameras over Coax using PoE

Fiber Optic

Cat 5/6

Network Switch

Vi3305

Power

Supply

Coax

IP Cameras

328 ft. (100m) Vi2301A

Vi2300A

Up to four cameras, including high powered PTZ domes can be remotely powered without the

need for local power supplies.

The Fiber optics uplink port can be used to connect 4 cameras up to 80Km.

Data + PoE

328 ft. (100m)

Data + PoE

3,000 ft. (914m)

Data + PoE

3,000 ft. (914m)

Data + PoE

3,000 ft. (914m)

Data + PoE

3,000 ft. (914m)

Data + PoE

328 ft. (100m)

Vi2301A Data + PoE

328 ft. (100m)

Vi2301A Data + PoE

328 ft. (100m)

IP Cameras

Vi2301A

Vi2300A

Data + PoE

328 ft. (100m)

Data + PoE

3,000 ft. (914m)

Data + PoE

3,000 ft. (914m)

Data + PoE

3,000 ft. (914m)

Data + PoE

3,000 ft. (914m)

Data + PoE

328 ft. (100m)

Vi2301A Data + PoE

328 ft. (100m)

Vi2301A Data + PoE

328 ft. (100m)

Produkt Specifikationer

Mærke:	Vigitron
Kategori:	Netværkskort/adapter
Model:	Vi3305

Har du brug for hjælp?

Hvis du har brug for hjælp til Vigitron Vi3305 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Netværkskort/adapter Vigitron Manualer

Vigitron Vi00024 Manual

10 December 2024

Vigitron Vi3305 Manual

10 December 2024

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Cambium Networks CG52A Manual

11 Januar 2025

StarTech.com ST1000SPEXD4T Manual

8 Januar 2025

TP-Link UB500 Plus Manual

2 Januar 2025

Digitus DN-30211 Manual

1 Januar 2025

Advantech WISE-S100-A Manual

31 December 2025

D-Link DFE-528TX Manual

29 December 2024

D-Link DWA-160 Manual

29 December 2024

StarTech.com U1-USB-ISOLATOR Manual

29 December 2024

StarTech.com AX54005A-USB-WIFI-6E Manual

29 December 2024

StarTech.com CDP2DVI Manual

28 December 2024