StarTech.com PEX40GQSFDPI Manual


Læs nedenfor 📖 manual på dansk for StarTech.com PEX40GQSFDPI (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 10/06/2017
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/PEX40GQSFDPI.
Package contents
1 x network card
1 x low-prole bracket
1 x quick-start guide
Requirements
PCI Express® enabled computer with an available PCI Express slot
(x8 or x16)
One 40G QSFP+ transceiver module
Any of the following operating systems:
Windows® 10
Windows 8.1
Windows 8
Windows 7
Windows Server® 2016
Windows Server 2008 R2
Windows Server 2012
Linux® kernel 2.6.32 to 4.1.1. (64-bit) LTS Versionsx
Phillips type screwdriver (optional)
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/PEX40GQSFDPI.
PEX40GQSFDPI
Dual-Port QSFP+ Server Network Card - PCI Express - Intel Chip
*actual product may vary from photos
Install the low-prole bracket
The PEX40GQSFDPI can be mounted in both low-prole and
full-prole computer systems. The full-prole bracket comes
preinstalled in the QSFP+ network card, but you can install the
low-prole bracket instead.
1. Use a Phillips type screwdriver to remove the two bracket screws
from the PEX40GQSFDPI.
2. Remove the full-prole bracket from the QSFP+ network card.
3. Line up the low-prole bracket with the bracket holes on the back
of the QSFP+ network card.
4. Insert the two bracket screws that you removed in step 1 and
tighten them into place.
Install the network card in a computer
Warning! Network cards can be severely damaged by static
electricity. Make sure that youre properly grounded before you
open your computer case or touch your PCIe card. You should wear
an anti-static strap when you install any computer component.
If an anti-static strap isn’t available, discharge any built-up static
electricity by touching a large, grounded metal surface for several
seconds. Only handle the PCIe card by its edges and don’t touch the
gold connectors.
1. Turn o your computer and any devices or peripherals that are
connected to it (for example, printers, external storage, and
so on).
2. Unplug the power cable from the back of your computer.
3. Disconnect any peripheral devices that are connected to your
computer.
Product diagram
Mounting bracket
(full-prole pictured)
QSFP+ slot QSFP+ slot
Link or activity
LEDs
Bracket screw
Bracket screw
PCIe p1-x8
connector


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: PEX40GQSFDPI

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com PEX40GQSFDPI stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter StarTech.com Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Digitus

Digitus DN-30211 Manual

1 Januar 2025
Advantech

Advantech WISE-S100-A Manual

31 December 2025
D-Link

D-Link DFE-528TX Manual

29 December 2024
D-Link

D-Link DWA-160 Manual

29 December 2024
Cudy

Cudy POE200 Manual

28 December 2024
Lindy

Lindy 43237 Manual

27 December 2024
Lindy

Lindy 43247 Manual

27 December 2024
Lindy

Lindy 43244 Manual

27 December 2024