StarTech.com PR12GI-NETWORK-CARD Manual

StarTech.com Netværkskort/adapter PR12GI-NETWORK-CARD

Læs nedenfor 📖 manual på dansk for StarTech.com PR12GI-NETWORK-CARD (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: December 14, 2023
Product Diagram (PR12GI-NETWORK-CARD)
Port/LED/Connector Function
1Bracket
Secures the card to the Host Computer Case
The comes pre-installedFull Prole Bracket
The is included Low Prole Bracket
2LED Indicators
(As seen on image)
Top LED Indicator 1000/100/10 Mbps Link is
Activity
Solid Green: 1000/100/10 Mbps
Flashing Green: Activity
Bottom LED Indicator 2.5 Gbps Link /Activity is
Solid Green: 2.5 Gbps
Flashing Green: Activity
3Ethernet Port Connect a to the Network Cable Network Card
Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps
4PCIe 2.0 p1-x1 Connector Insert into a on the PCI Express Slot Host Computer
1-Port PCIe 2.5G Ethernet Network Adapter Card - Intel
Package Contents
1-Port PCIe 2.5 Gbps Network Card x 1
Low Prole Bracket x 1
Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/PR12GI-NETWORK-CARD
Host computer with an available PCI Express 2.0 or greater slot (x1, x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity can severely damage PCI Express Cards. Ensure that you are
adequately Grounded before you open your Host Computer Case or touch the PCI
Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when
installing any Host Computer component. If an Anti-Static Strap isn’t available,
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the PCI Express Card by its edges and don’t touch the
gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the back of the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
4. Remove the from the . Consult the documentation that Cover Host Computer Case
came with the for details about doing this safely.Host Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Host Computer Case
Note: Consult the documentation that came with the Host Computer for details about
doing this safely.
This card works in PCI Express x1, x2, x4, x8, or p1-x16 Slots.
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Host Computer Case to the back of the .
Note: If you install the PCI Express Card into a Small Form Factor or a Low Prole
Desktop System, it may be necessary to replace the pre-installed standard
4
1
*Product may vary from image
3
2


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: PR12GI-NETWORK-CARD

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com PR12GI-NETWORK-CARD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter StarTech.com Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

LevelOne

LevelOne FNC-0109TX Manual

14 Oktober 2024
Legrand

Legrand CS102 Manual

9 Oktober 2024
Edimax

Edimax EW-7822ULC Manual

8 Oktober 2024
Alecto

Alecto HPD-142 Manual

4 Oktober 2024
LevelOne

LevelOne GNC-0122 Manual

4 Oktober 2024
TP-Link

TP-Link UE200 Manual

3 Oktober 2024
Tenda

Tenda W311MA Manual

2 Oktober 2024
NEC

NEC NP05LM4 Manual

30 September 2024