StarTech.com PR42GI-NETWORK-CARD Manual

StarTech.com Netwerkkaart/adapter PR42GI-NETWORK-CARD

Læs nedenfor 📖 manual på dansk for StarTech.com PR42GI-NETWORK-CARD (2 sider) i kategorien Netwerkkaart/adapter. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: January 9, 2023
Product Diagram (PR42GI-NETWORK-CARD)
Port/LED/Connector Function
1Bracket
Secures the card to the Host Computer Case
The comes pre-installedFull Prole Bracket
The is included Low Prole Bracket
24x Ethernet Ports
Connect a to the Network Cable Network Card
Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps
Note: Ethernet port 1 (P1) is the only port that
supports WoL (Wake-on-LAN).
3LED Indicators
Left LED Indicator Link Speed is
Solid Green: 2.5 Gbps
Solid Amber: 1 Gbps
O: 100 or 10 Mbps
Right LED Indicator Link Status is
Solid Green: Active link
Flashing Green: Activity
4PCIe 2.0 p1-x4 Connector Insert into a on the PCI Express Slot Host Computer
4-Port 2.5GBase-T Ethernet Network Adapter Card - PCIe 2.0 x4
Package Contents
4-Port PCIe 2.5 Gbps Network Card x 1
Low Prole Bracket x 1
Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/PR42GI-NETWORK-CARD
Host Computer with an available PCI Express 2.0 or greater Slot (x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity PCI Express Cardscan severely damage . Ensure that you are
adequately before you open your or touch the Grounded Host Computer Case PCI
Express Card Anti-Static Strap Anti-Static Mat . You should wear an or use an when
installing any Host Computer component. If an isn’t available, Anti-Static Strap
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the by its edges and don’t touch PCI Express Card
the gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the back of the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
4. Remove the from the . Consult the documentation that Cover Host Computer Case
came with the for details about doing this safely.Host Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Host Computer Case
Note: Consult the documentation that came with the for details Host Computer
about doing this safely. This card works in PCI Express x4, x8, or p1-x16 Slots.
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Host Computer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low Prole
Desktop System, it may be necessary to replace the pre-installed standard
Full Prole Bracket Low Prole Bracketwith the included .
24
1
3*Product may vary from image
P1 P2 P3 P4


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netwerkkaart/adapter
Model: PR42GI-NETWORK-CARD

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com PR42GI-NETWORK-CARD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netwerkkaart/adapter StarTech.com Manualer

Netwerkkaart/adapter Manualer

Nyeste Netwerkkaart/adapter Manualer

Asus

Asus USB-N13 Manual

15 September 2024
Clas Ohlson

Clas Ohlson VE704 Manual

15 September 2024
Edimax

Edimax EN-9320SFP+ Manual

15 September 2024
Gembird

Gembird WNP-UA1300-01 Manual

14 September 2024
Linksys

Linksys PLE300-UK Manual

14 September 2024
TP-Link

TP-Link TL-WN650G Manual

14 September 2024
TP-Link

TP-Link TL-WN781ND Manual

11 September 2024
TP-Link

TP-Link Archer TX20UH Manual

11 September 2024
TP-Link

TP-Link TL-WN8200ND Manual

10 September 2024
TP-Link

TP-Link TL-WN951N Manual

10 September 2024