StarTech.com ST10GSPEXNB2 Manual
StarTech.com
כרטיס/מתאם רשת
ST10GSPEXNB2
Læs nedenfor 📖 manual på dansk for StarTech.com ST10GSPEXNB2 (2 sider) i kategorien כרטיס/מתאם רשת. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 12, 2022
Product Diagram (ST10GSPEXNB2)
Port/LED/
Connector Function
1Bracket • Secures the card to the . The Computer Case Full-
height Bracket comes pre-installed.
2LED Indicators
• Left LED Indicator Link Speed is
• Solid Green = 10Gbps
• Solid Amber =
5Gbps/2.5Gbps/1Gbps/100Mbps/10Mbps
• Right LED Indicator Link Status is
• Solid Green = Active link
• Flashing Green = Activity
3Ethernet Port
• Connect a to the Network Cable Network Card
• Supports
10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps/10 Mbps
For 10 Gbps speeds Cat6 or higher cable is needed
4PCIe p1-x2 Connector • Insert into a on the PCI Express Slot Host Computer
1-Port 10GBase-T / NBase-T Ethernet Network Adapter Card - PCIe Ver 3.0 x2
Package Contents
• PCIe 10 Gbps Network Card x 2
• Low-prole Bracket x 1
• Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/ST10GSPEXNB2
• Computer with an available PCI Express Slot (x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity PCI Express Cardscan severely damage . Ensure that you are
adequately before you open your or touch the Grounded Computer Case PCI
Express Card Anti-Static Strap Anti-Static Mat . You should wear an or use an when
installing any computer component. If an isn’t available, discharge Anti-Static Strap
any built-up static electricity by touching a large for several Grounded Metal Surface
seconds. Only handle the by its edges and don’t touch the gold PCI Express Card
connectors.
1. Turn o the and any that are connected to it (for Computer Peripheral Devices
example, , , etc.).Printers External Hard Drives
2. Unplug the from the back of the .Power Cable Computer
3. Disconnect any that are connected to the .Peripheral Devices Computer
4. Remove the from the . Consult the documentation that came Cover Computer Case
with the for details about doing this safely.Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Consult the documentation that came with Computer Case
the for details about doing this safely. This card works in PCI Express , Computer x2
x4 x8 x16 Slots, , or .
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Computer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole
Desktop System Full-, it may be necessary to replace the pre-installed standard
Height Bracket Low-Prole Bracketwith the included .
8. Return the onto the .Cover Computer Case
4
1
2
3
Produkt Specifikationer
| Mærke: | StarTech.com |
| Kategori: | כרטיס/מתאם רשת |
| Model: | ST10GSPEXNB2 |
Har du brug for hjælp?
Hvis du har brug for hjælp til StarTech.com ST10GSPEXNB2 stil et spørgsmål nedenfor, og andre brugere vil svare dig
כרטיס/מתאם רשת StarTech.com Manualer
20 August 2024
StarTech.com Manualer
10 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024