StarTech.com ST2GPEX Manual


Læs nedenfor 📖 manual på dansk for StarTech.com ST2GPEX (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: November 12, 2021
Product Diagram (ST2GPEX)
Port/LED/
Connector Function
1Bracket Both Low-Prole and Full-Height Brackets are included
2Link/Activity LED
Indicators
Indicates Link Speeds
Top is Solid Green = 2.5Gbps LinkLED Indicator
Top is Flashing Green = 2.5Gbps ActivityLED Indicator
Bottom is Solid Green = LED Indicator
1Gbps/100Mbps/10Mbps Link
Bottom is Flashing Green = LED Indicator
1Gbps/100Mbps/10Mbps Activity
3Ethernet Port Used to connect a to the Network Cable Network
Card
4PCIe p1-x1
Connector Insert into a PCI Express Slot
1 Port PCI Express 2.5Gbps NBase-T Ethernet Network Card
Requirements
For the latest requirements, please visit .www.startech.com/ST2GPEX
Computer with an available PCI Express Slot (x1, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
PCI Express Cards can be severely damaged by static electricity. Make sure that
you are properly grounded before you open your or touch the Computer Case PCI
Express Card Anti-Static Strap . You should wear an when you install any computer
component. If an isn’t available, discharge any built-up static Anti-Static Strap
electricity by touching a large for several seconds. Only Grounded Metal Surface
handle the by its edges and don’t touch the gold connectors.PCI Express Card
1. Turn o your and any that are connected to it (for Computer Peripheral Devices
example, , , etc.).Printers External Hard Drives
2. Unplug the from the back of your .Power Cable Computer
3. Disconnect any that are connected to your .Peripheral Devices Computer
4. Remove the from your . Consult the documentation that Cover Computer Case
came with your for details about how to do this safely.Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of your . Consult the documentation that came with Computer Case
your for details about how to do this safely. This card works in PCI Express Computer
x1, x4, x8, or p1-x16 slots.
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Computer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole
Desktop System Full-, it may be necessary to replace the pre-installed standard
Height Bracket Low-Prole Bracketwith the included .
7. Return the back onto your .Cover Computer Case
8. Reconnect the to the back of your .Power Cable Computer
9. Reconnect all of the that were disconnected in step 3.Peripheral Devices
10. Turn on your and .Computer Peripheral Devices
4
3
1 2


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: ST2GPEX

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST2GPEX stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter StarTech.com Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Digitus

Digitus DN-30211 Manual

1 Januar 2025
Advantech

Advantech WISE-S100-A Manual

31 December 2025
D-Link

D-Link DFE-528TX Manual

29 December 2024
D-Link

D-Link DWA-160 Manual

29 December 2024
Cudy

Cudy POE200 Manual

28 December 2024
Lindy

Lindy 43237 Manual

27 December 2024
Lindy

Lindy 43247 Manual

27 December 2024
Lindy

Lindy 43244 Manual

27 December 2024