StarTech.com ST3300G3UA Manual


Læs nedenfor 📖 manual på dansk for StarTech.com ST3300G3UA (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Instruction manual
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 10/22/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/ST3300G3UA.
Packaging contents
1 x 3-port USB 3.0 hub plus Gigabit Ethernet
1 x instruction manual
System requirements
Host computer with a USB 2.0 or USB 3.0 port
Any of the following operating systems:
Windows® 10 (32-bit or 64-bit)
Windows 8.1 (32-bit or 64-bit)
Windows 8 (32-bit or 64-bit)
Windows 7 (32-bit or 64-bit)
Windows Server® 2008 R2
Windows Server 2012
Mac OS 10.7 and later (tested up to 10.11)
Note: To obtain the maximum USB throughout, you must use a
computer with a USB 3.0 port.
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/ST3300G3UA.
ST3300G3UA
3-Port USB 3.0 Hub Plus Gigabit Ethernet
*actual product may vary from photos
Product diagram
Gigabit RJ45 port USB 3.0 ports
Introduction
The ST3300G3UA is a sleek and stylish USB 3.0 hub and Gigabit
Ethernet adapter that is portable and lightweight. It’s equipped
with three USB 3.0 ports with throughput up to 5Gbps and is also
backward compatible, so you can use it with your USB 2.0 and earlier
devices.
USB 3.0 cable
Power LED
Link and activity LED
Gigabit RJ45 port
USB 3.0 cable
Conrm driver installation
Depending on the version of the operating system that you’re
running, when you connect the hub to your computer, the drivers
are installed automatically.
To make sure that the drivers installed properly, on a computer
running a version of Windows, do the following:
1. On your computer, navigate to Device Manager.
2. Under , check to make sure that there isnt an Network adapters
exclamation mark next to any of the adapters.
If there is an exclamation mark next to the Realtek USB device, see
the topic for more information.Install a driver
Connect the hub to a computer
1. Connect the USB 3.0 cable on the hub to a USB port on the host
computer.
Note: For the best performance, use a computer with a USB 3.0 port.
2. Connect your Cat 5e/6 network connection to the Gigabit RJ45
port on the hub.
3. Connect up to three USB 3.0 peripherals to the hub as necessary.
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps.


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: ST3300G3UA

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST3300G3UA stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter StarTech.com Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Digitus

Digitus DN-30211 Manual

1 Januar 2025
Advantech

Advantech WISE-S100-A Manual

31 December 2025
D-Link

D-Link DFE-528TX Manual

29 December 2024
D-Link

D-Link DWA-160 Manual

29 December 2024
Cudy

Cudy POE200 Manual

28 December 2024
Lindy

Lindy 43237 Manual

27 December 2024
Lindy

Lindy 43247 Manual

27 December 2024
Lindy

Lindy 43244 Manual

27 December 2024