Suonobuono Lazer Manual
Suonobuono
DJ udstyr
Lazer
Læs nedenfor 📖 manual på dansk for Suonobuono Lazer (5 sider) i kategorien DJ udstyr. Denne guide var nyttig for 32 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/5
Foreword
Suonobuono is my attempt to share innovative products with other music
enthusiasts Managing all aspects of this company, from early design to .
products manufacturing, from logistics to marketing, has taken me great
deals of time energy. Musicians like you, who care about creativity and and
support independent realities make it all worth it, THANK YOU!
I hope that you will enjoy your new Lazer and really recommend reading
this short manual to get the most out of it.
Stefano Sorrentino, founder, Suonobuono AB
Cleaning and maintenance
It is recommended to cover Lazer when it is not used, so that dust does not
deposit on the lens.
If the case becomes dirty, wipe it with a clean, dry cloth. Do not use liquid
cleaners such as benzene or thinner, or cleaning compounds or flammable
polishes.
Be particularly careful not to scratch the laser optics You may use a .
dry soft cotton bud to wipe away dust from the laser lens, using great
care to not scratch the lens and to not apply force e optics. to th
Product Warranty
The warranty covers all defects in material and workmanship for a period of
two years from the date of original purchase. During this time, Suonobuono
AB will repair or replace the product without charge for materials or labor,
provided the product was first inspected and found faulty by Suonobuono.
You must first contact Suonobuono AB by email. Products that were mailed
without prior agreement cannot be exchanged or repaired free of charge.
The unit must be insured and sent prepared in its original package. Please
include a detailed description of the defect. Suonobuono AB reserves the
right to upgrade the unit if necessary. This warranty does not cover defects
due to abuse, operation under other than specified conditions, or repair by
unauthorized persons. The warranty covers only those malfunctions
caused by material or workmanship defects that occur during normal
operation. Units that have been opened, modified or exposed to unusual
stress and conditions are not covered by the warranty.
If you have any questions about your Suonobuono product, feel free to
send an email to info (at) suonobuono.net
Precautions
Location: Using the unit in the following locations can result in a
malfunction
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
Power supply: Lazer is powered from the USB connector. Connect a USB
2.0 compliant power bank or USB host. Do not connect any power source
that is not a USB 2.0 compliant power source. Using a different power
supply than the recommended one may result in device damage and could
cause a breakdown, fire, or electrical shock.
Handling: To avoid breakage, do not apply excessive force to the switches
or controls.
Care: Do not open or modify this product, since doing so may result in
safety hazards and will automatically invalidate the product guarantee.
Installing firmware not officially released by Suonobuono AB on this product
will also void the product guarantee and may result in safety hazards.
Keeping foreign matter out of your equipment: Never set any container
with liquid in it near this equipment. If liquid gets into the equipment, it could
cause a breakdown, fire, or electrical shock. Be careful not to let metal
objects get into the equipment. If something does slip into the equipment,
unplug the power supply immediately and contact Suonobuono for
assistance.
Headphones volume: the PHONES output can deliver very loud sound
level on headphones, which may damage hearing. Always set a low
Phones Volume level on Lazer before connecting headphones and before
wearing them.
Keep this manual: After reading this manual, please keep it for later
reference.
Laser safety considerations
This device contains a laser emitter and corresponding drive circuitry. The
laser output is designed to remain within Class 1 laser safety limits under
all reasonably foreseeable conditions including single faults in compliance
with IEC 60825-1:2014 (third edition).
The laser output remains within Class 1 limits as long as the recommended
device settings are used and the operating conditions specified in this
manual are respected.
The laser output power must not be increased by any means and no optics
should be used with the intention of focusing the laser beam.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
The laser emitter included in this device uses invisible light. Avoid looking
directly into the emitter during operation and absolutely avoid using any
optics that may focus the laser beam into the eye.
Unauthorized modifications of the firmware, electronics, optics or enclosure
of the device may alter the level or duration of laser emissions and
generate a safety hazard. Only firmware updates that are officially released
by Suonobuono should be used, and no modification of any hardware part
of the device should be attempted by anyone not explicitly authorized by
Suonobuono.
Suonobuono takes no responsibility for any damage deriving from not
following the safety recommendations provided in this manual, or from any
modifications to the device.
Declaration of conformity
Important notice: DO NOT MODIFY THE UNIT!
USA:
This product, when installed as indicate in the instructions contained in this
manual, meets FCC requirement. Modifications not expressly approved by
Suonobuono AB may avoid your authority, granted by the FCC, to use the
product.
IMPORTANT: When connecting this product to accessories and/or another
product, use only high quality shielded cables. Cable(s) supplied with this
product must be used. Follow all installation instructions. Failure to follow
instructions could void your FFC authorization to use this product in the
USA.
NOTE: This product has been tested and found to comply with the limit for
a Class B Digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide a reasonable protection against harmful
interference in a residential environment. This equipment generates, uses
and radiates radio frequency energy and, if not installed and used
according to the instructions found in the user manual, may cause
interferences harmful to the operation to other electronic devices.
Compliance with FCC regulations does not guarantee that interferences will
not occur in all the installations. If this product is found to be the source of
interferences, which can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the following measures:
• Relocate either this product or the device that is affected by the
interference.
• Use power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter(s).
• In the case of radio or TV interferences, relocate/ reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial cable.
• If these corrective measures do not bring any satisfied results,
please contact Suonobuono AB .
The above statements apply ONLY to those products distributed in the
USA.
EUROPE
This product complies with the requirements of European Directive
89/336/EEC This product may not work correctly by the influence of
electro-static discharge; if it happens, simply restart the product.
Disposal
You must dispose the product in the correct manner to avoid harm to
human health or damage to the environment. Contact your local
administrative body for details on the correct disposal method.
suonobuono lazer- user manual
suonobuono lazer- user manual
suonobuono lazer- user manual
suonobuono lazer- user manual suonobuono lazer- user manual
Produkt Specifikationer
| Mærke: | Suonobuono |
| Kategori: | DJ udstyr |
| Model: | Lazer |
Har du brug for hjælp?
Hvis du har brug for hjælp til Suonobuono Lazer stil et spørgsmål nedenfor, og andre brugere vil svare dig
DJ udstyr Suonobuono Manualer
11 November 2022
DJ udstyr Manualer
- DJ udstyr Denver
- DJ udstyr Sencor
- DJ udstyr Pro-Ject
- DJ udstyr Lenco
- DJ udstyr Audio-Technica
- DJ udstyr Pioneer
- DJ udstyr Faderfox
- DJ udstyr Qtx
- DJ udstyr Behringer
- DJ udstyr Kenwood
- DJ udstyr Roland
- DJ udstyr Pyle
- DJ udstyr Denon
- DJ udstyr Auna
- DJ udstyr Muse
- DJ udstyr Thomson
- DJ udstyr Pyle Pro
- DJ udstyr AKAI
- DJ udstyr Skytec
- DJ udstyr König
- DJ udstyr TechniSat
- DJ udstyr Crosley
- DJ udstyr Kärcher
- DJ udstyr Festo
- DJ udstyr Wacom
- DJ udstyr Technics
- DJ udstyr HQ
- DJ udstyr Krüger&Matz
- DJ udstyr PreSonus
- DJ udstyr Victrola
- DJ udstyr NAD
- DJ udstyr ESI
- DJ udstyr Tascam
- DJ udstyr Omnitronic
- DJ udstyr Swann
- DJ udstyr Zoom
- DJ udstyr Dual
- DJ udstyr Korg
- DJ udstyr Arturia
- DJ udstyr RME
- DJ udstyr Onkyo
- DJ udstyr Line 6
- DJ udstyr Teac
- DJ udstyr Thorens
- DJ udstyr Marantz
- DJ udstyr Soundcraft
- DJ udstyr American Audio
- DJ udstyr Monacor
- DJ udstyr ION
- DJ udstyr Numark
- DJ udstyr Allen & Heath
- DJ udstyr Alesis
- DJ udstyr Native Instruments
- DJ udstyr Gemini
- DJ udstyr Universal Audio
- DJ udstyr Hercules
- DJ udstyr Reloop
- DJ udstyr DAP-Audio
- DJ udstyr Ortofon
- DJ udstyr DB Technologies
- DJ udstyr MoFi
- DJ udstyr Ecler
- DJ udstyr DTronics
Nyeste DJ udstyr Manualer
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
15 November 2024
24 Oktober 2024
11 Oktober 2024
26 August 2024
25 August 2024