Synamodec Dementor Manual


Læs nedenfor 📖 manual på dansk for Synamodec Dementor (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 25 26 27 28
FILTER CONTROLS
Level 1 input level 1
Level 2 input level 2
Resonance control
Cut-o control
Rate for resonance modula on
Rate for cut-o modula on  
Mod, lfo output level for resonance
Mod, lfo output level for cut-o
1.2 Eq / lter bass
3.4 Eq / lter media
5.6 Eq / lter treble
Level, input level to nuances and device output
Feedback, input level to nuances taken from the output of this
Rate lfo for me modula on of the echo / delay (paranormal)  
Mod, lfo output level for me modula on  
To Paranormal, send the output signal nuances to the OUT
or eco / delay (paranormal)
Level Processor entry level
Time, delay me control
Echo level, eect level
Repeat, control of number of repe ons (echo) 
OUT, device output
IN 1,2, inputs to device
ON / OFF switch
28v dc power input
INSTRUCTIONS
1. Set all pots to zero, cut-o at 12, Time at 12 and the To Paranormal switch on the le .  
2. Plug two di erent inputs (for example one square wave and one white noise). This
device can accept signals maximum of 10Vpp,
3. Plug the Out jack to your mixer.
Lets play!
1. Increase the input levels as well as the level of the nuances. Now, you can hear the
output signal. Manually play with the Cut-o and Resonance pots.
2. Cut-o and Resonance can be managed by the LFOs.
3. Increase the level of the Nuances pots one by one and reset them to zero. You will
appreciate how work the six pots (1,2,3,4,5,6).
a. 1,2 will enhance the bass
b. 3,4 the mids
c. 5,6 the treble,
4. You can also apply the level of feedback that you like, keep in mind that if the signal is
very enhanced with the nuances, especially the bass, increasing the feedback. To much
satura ons will produce strange signals.
5. Repeat this procedure using other signa, (white noise, synth pad, etc.)
6. The Switch to paranormal send the signal to the Eco / delay sec on. Time parameter
can be LFO modulated .
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 26
27
28


Produkt Specifikationer

Mærke: Synamodec
Kategori: Ikke kategoriseret
Model: Dementor

Har du brug for hjælp?

Hvis du har brug for hjælp til Synamodec Dementor stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Synamodec Manualer

Synamodec

Synamodec Dementor Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer