TDE Instruments Digalox DPM72-MPPV Manual

TDE Instruments Måling Digalox DPM72-MPPV

Læs nedenfor 📖 manual på dansk for TDE Instruments Digalox DPM72-MPPV (8 sider) i kategorien Måling. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/8
Digalox DPM72-MPPV
Instruction manual (Rev-2020-09)
Graphical panel meter with RGB backlight for analogue signal 2 × 0/2 - 10 V
Package contents: Panel meter Digalox DPM72-MPPV, mounting bracket,
5 jumpers, 2 instruction manuals (EN + DE)
1. Safety instructions
Read instruction manual carefully before operating the device! Keep for later
reference.
Mounting and installation must be carried out by suitably qualified and competent
persons only.
When working on the device hazardous voltages must not be connected to
the device! The terminals J1-J12 are not isolated from the measuring
circuit.
The device must not be used as the only protective device or protective
shutdown.
The device is not intended to protect persons or facilities against harm. Specific
devices must be used to guarantee safety (protection relays, cut-off switches,
etc.).
When connecting switches to the terminals J1-J6, only switches must be used
whose isolation voltage is at least twice the maximum occurring measurement
voltage. For example, when measuring 30:V DC switches must be isolated for at
least 60:V.
Do not open the housing!
Do not use the device in the presence of explosive or flammable substances!
All cables carrying hazardous voltages must be secured with external separators.
2. Meaning of symbols
General warning sign
(Attention, observe the documentation!)
Warning of an electrical hazard
----- ----- 1 / 8


Produkt Specifikationer

Mærke: TDE Instruments
Kategori: Måling
Model: Digalox DPM72-MPPV

Har du brug for hjælp?

Hvis du har brug for hjælp til TDE Instruments Digalox DPM72-MPPV stil et spørgsmål nedenfor, og andre brugere vil svare dig