Techno Line WS 6840 Manual


Læs nedenfor 📖 manual på dansk for Techno Line WS 6840 (2 sider) i kategorien Vejrstation. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
LED Radio-Controlled Clock WS 6840
Key Features:
` DCF-77 radio controlled
` 12/24 H display.
` Time zone setting: -12 to +12 Hour.
` Dual Alarm with snooze function
` Indoor Temperature display in °C/°F
` Outdoor Temperature display in °C/°F
Power on or Reset:
` After power on or Reset, all LEDs turn on accordingly, buzzer beeps, unit enter RF Searching mode for Max. 3
minutes, then exit RF Searching mode and enter normal mode.
Clock setting:
` At normal mode, Press and hold the MODE key more than 2 seconds, can set 12/24HR Æ Æ Æ Hour Minute
Offset time.
` Corresponding icon flash at 1Hz, and press UPor “DOWN” ”key to set the value, and hold UPor “DOWN key for
fast increasing or decreasing.
` Press MODE” key to confirm the setting and come to next setting, unit will return to Normal Mode after finish
setting.
F.Y.I.:
` At any other mode, if without key operation for 15 seconds, the unit will store current setting and return to Normal
Mode automatically.
` How to set Offset Time : Offset time means the time different between local time and Germany time; If local time is
1 hour faster than Germany time, then set the offset time to +1HR; If local time is 1 hour slower than Germany time,
then set the offset time to -1HR; Unit’s clock will automatically set to local time after receiving DCF signal
successfully.
Alarm Setting:
` At normal mode, PressMode” key to toggle the display among Clock Æ AL1 time Æ AL2 time, When AL1 or AL2
time be displayed ,press and hold Mode” key more than 2 seconds to set Hour & Minute, corresponding icon
flash at 1Hz. press UPor DOWN key to set the value, and hold UPor DOWNkey for fast increasing or
decreasing.
` When AL1 or AL2 icon flash, Press Down” key to enable(Corresponding Alarm LED turn on) or
disable(Corresponding Alarm LED turn off) alarm. Unit will return to normal mode after finish setting
` Alarm sound crescendo for 2 minutes.
` During alarm, pressSNOOZE” key to stop the alarm and enable snooze function (Corresponding Alarm LED flash
at this status), the unit will alarm 5 minutes later.
` During alarm or Snooze function enable, press any other keys except SNOOZEkey, will cancel the alarm or
Snooze function.
Indoor Temperature Measurement:
` Indoor Temperature measurement range: -9°C ~ +49°C, LLLwill displayed if value lower than -9°C, HHHwill


Produkt Specifikationer

Mærke: Techno Line
Kategori: Vejrstation
Model: WS 6840

Har du brug for hjælp?

Hvis du har brug for hjælp til Techno Line WS 6840 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vejrstation Techno Line Manualer

Vejrstation Manualer

Nyeste Vejrstation Manualer

Ventus

Ventus W815 Manual

21 December 2024
Steinberg

Steinberg SBS-WS-500 Manual

18 December 2024
EQ-3

EQ-3 WDC 7000 Manual

16 December 2024
Steinberg

Steinberg SBS-RS-40 Manual

16 December 2024
Sencor

Sencor SWS 260 Manual

15 December 2024
Steinberg

Steinberg SBS-WS-600 Manual

15 December 2024
ADE

ADE WS 2136-1 Manual

15 December 2024
TFA

TFA 30.3034.01 Manual

14 December 2024
TFA

TFA 35.1078.10 Manual

14 December 2024