Irox Comfo-X Manual

Irox Vejrstation Comfo-X

Læs nedenfor 📖 manual på dansk for Irox Comfo-X (3 sider) i kategorien Vejrstation. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

Healthy living with the home climate hygrometer COMFO-X

The home climate hygrometer displays the ideal climate and indoor temperature, which is also dependent on the

season, in an easy to understand way. The coloured sections enable a fast and accurate reading to help maintain a

healthy and appropriate indoor climate.

The COMFO-X provides a major benefit during the heating period simply because you can monitor the ideal climate in

each room which is particularly important for preventing mould growth (see below step 1-3). As necessary you can then

either heat more and/or ventilate more to make the necessary improvements to the home climate.

By the thermometer at the bottom of the unit you can read the room temperature and find the colour that

corresponds with this temperature:

Dark blue low heating 16-18°C

Medium blue normal heating 18-22°C

Light blue high heating 22-24°C

On the blue display above determine the valid scale, with following differentiation:

Winter Autumn/Spring for temperatures under +5°C for temperatures of 5-15°C

On the scale for the outdoor weather you can now, by colour, determine

the ideal indoor moisture for the room temperature.

Example: For a room temperature of 20°C in winter the relative humidity should not exceed 40-50%, if this is the case

you can lower humidity by force ventilating the room for 5 minutes.

Information about the COMFO-X

The measuring accuracy is +/- 3% relative humidity in the range of 25 to 100% relative humidity. The measuring

element of the hygrometer is a specially pre-treated synthetic fibre which, as opposed to human hair, guarantees high

measuring accuracy even without maintenance.

Only units with real hair measuring elements need be moistened once a month and readjusted as necessary because

otherwise their measuring accuracy decreases. For COMFO-X though this is only recommended once a year. An

annual maintenance should be conducted after a longer time frame with low humidity, for example in spring after a cold

winter.

To do so, completely wrap the unit in a warm and moist cloth for about 30 minutes. The cloth should be moist but not

dripping wet! No hot water or steam should influence the hygrometer, otherwise the measuring accuracy can no longer

be guaranteed.

An inaccuracy in the moisture display can be corrected as follows:

- Compare the measuring value after unpacking, or 1 day after maintenance, with a reference instrument, i.e. a digital

thermo/hygrometer from Irox (www.irox.com).

- If you notice deviations, the display of the COMFO-X hygrometer can be corrected with a zero-point correction. The

correction screw is located in one of the openings on the side of the housing.

- With a screwdriver that fits turn the correction screw until the value on the display corresponds with the reference

instrument.

Placement of the measuring unit

The hygrometer must be placed in the right location to ensure reliable measurements. Choose a location on an interior

wall, at a medium height of 1-2 meters above the ground. Avoid cooler outer walls, window areas and close proximity to

radiators or direct sunlight.

As an alternative to wall mounting your device can also be set-up on the wooden stand. On the stand it is ideally

accessible for the room air and therefore reacts faster. Place the COMFO-X into the stand, slightly tilt forwards, and

then press slightly to the back. Make sure that it sits tightly in the stand and is secure.

Produkt Specifikationer

Mærke:	Irox
Kategori:	Vejrstation
Model:	Comfo-X
Bredde:	100 mm
Dybde:	18 mm
Højde:	100 mm
Produktfarve:	Black, Silver, White
Dimensioner (BxDxH):	100 x 18 x 100 mm
Kan monteres på væggen:	Ja
Ur-funktion:	Ingen
Alarmfunktion:	Ingen
Fugtigheds-måleområde (udendørs) (H-H):	1 - 99 %
Temperatur måleområde (indendørs) (T-T):	0 - 40 °C