Techno Line WS 9624 IT Manual

Techno Line Vejrstation WS 9624 IT

Læs nedenfor 📖 manual på dansk for Techno Line WS 9624 IT (46 sider) i kategorien Vejrstation. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/46

Prod.-Nr. 095.689 6 L-Nr. L778/263

WIRELESS 868 MHz WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this Weather station with wireless 868MHz transmission. It not

only displays the indoor temperature and humdity, but also the outdoor temperature and

humidity. It is further acting as a DCF-77 radio controlled clock. With the totally 15 different

weather forecast icons featured by "weather girl", users can easily observe the forecast weather

condition and will no longer worry the sudden weather change. This innovative product is ideal

for use in the home or office.

FEATURES:

LCD

Displa

The Weather station

• DCF Radio controlled time function or manual time setting option

Function

Keys

Foldout

Stand

Battery

compartment

cover

Hanging hole

• DCF time reception ON/OFF setting

• 12/24 hour display

• Hour and minute and second display

• Time zone option ±12 hours

• Wireless transmission at 868 MHz

• Signal reception intervals at 4-second

• Display indoor and outdoor temperature and humidity (% RH)

• Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

• Weather forecasting with 15 easy-to-read weather forecast signs featured by weather

girl

• Weather forecasting icon sensitivity setting

• Indoor and Outdoor temperature and humidity display with MIN/MAX recording

• MIN/MAX records show date and time received of the temperature, and all MIN/MAX

recordings can be reset

• Can take up to three outdoor transmitters

• Display Daily Outdoor Min and Max temperature

• LCD contrast setting

• Low battery indicator

• Table standing/ Wall mounting

The Outdoor Thermo-hygro Transmitter

• Remote transmission of outdoor temperature and humidity to

Weather Station by 868 MHz

• Display alternately the outdoor temperature and humidity readings on

LCD

• Shower proof casing

• Wall mounting case (Mounting at a sheltered place. Avoid direct rain

and sunshine)

SETTING UP:

When one transmitter is used

1. First, insert the batteries into the Thermo-hygro transmitter. (see “Install and replace

batteries in the Thermo-hygro transmitter transmitter“).

2. Immediately after and within 25 seconds, insert the batteries into Weather station (see

“Install and replace batteries in the Weather station”). Once the batteries are in place,

all segments of the LCD will light up briefly. Following the time as 0:00 and the "weather

girl" icon will be displayed. If these are not displayed after 60 seconds, remove the

batteries and wait for at least 10 seconds before reinserting them.

3. After inserting the batteries, the Weather station will start receiving data from the

transmitter. The outdoor temperature & humidity and the signal reception icon should

then be displayed on the Weather station. If this does not happen after 3 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather Station and the transmitter (see notes on “Mounting” and “868 MHz

Reception”).

5. Once the remote temperature has been received and displayed on the Weather station,

the DCF time (radio controlled time) code reception is automatically started. This takes

typically between 3-5 minutes in good conditions. If after 10 minutes, the DCF time has

not been received, press the SET key to manually enter a time initially.

When more than one transmitter is used

1. User shall remove all the batteries from the weather station and transmitters and wait for

60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the Weather

Station. Once the batteries are in place, all segments of the LCD will light up briefly.

Following time as 0:00 and the weather girl icon will be displayed. If they are not shown in

LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before

reinserting them.

4. The outdoor temperature and humidity from the first transmitter (channel 1) should then be

displayed on the Weather station. Also, the signal reception icon will be displayed. If this

does not happen after 2 minutes, the batteries will need to be removed from both units

and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature &

humidity readings from the first transmitter are displayed on the Weather station.

Note: User shall insert the batteries into the second transmitter within 10 seconds of reception

of the first transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then be

displayed on the Weather station. If this does not happen after 2 minute, the batteries will

need to be removed from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor

data are displayed on the Weather station. Then within 2 minutes, the channel 3 outdoor

data from the third transmitter will be displayed and the channel icon will shift back to "1"

once the third transmitter is successfully received. If this is not happen, user shall restart

the setting up from step 1.

Note:

• User shall insert the batteries into the third transmitter within 10 seconds of reception of

the second transmitter.

• And user may require to check the displayed readings on the weather station

against those shown on the transmitters in order to recognise the Channel No. of

each transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather Station and the transmitter (see notes on “Mounting” and “868 MHz

Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described

above. Should transmission problems occur, it is necessary to remove the batteries from all units

and start again the set-up from step 1.

9. Once the remote temperature has been received and displayed on the Weather station,

the DCF time (radio controlled time) code reception is automatically started. This takes

typically between 3-5 minutes in good conditions.

If after 10 minutes, the DCF time has not been received, press the SET key to manually enter a

time initially.

Note:

Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not

successful, then at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If the

reception at 06:00 is still not successful, then the next try takes place at 02:00 next day.

If reception is successful, the received time will override the manually set time. The date is also

updated with the received time. (Please refer also to notes on “DCF Reception” and “Manual

Time Setting”)

Please participate in the preservation of the environment. Return used

batteries to an authorised depot.

FUNCTION KEYS:

Weather station:

The weather station has four easy to use function keys.

SET key

MIN

MAX ke

+ key

CH ke

LCD SCREEN AND SETTINGS:

Indoor Relative

Humidity %

Weather

Tendency indicator

Weathe

Forecast icon

(Weather girl)

Time

Outdoor Temperature

Outdoor

Reception

Signal*

Transmitter identification

(channel No.)

Indoor Temperature

Radio controlled time

reception icon

Transmitter low

battery indicator

Outdoor Relative

Humidity %

Daily max outdoor

temp

Date

Daily min

outdoor temp

Receiver lo

battery indicato

TENDENCY")

Section 4 - OUTDOOR TEMPERATURE AND HUMIDITY

• Display the outdoor temperature and humidity of the currently selected channel.

Section 5 - DAILY OUTDOOR MINIMUM AND MAXIMUM TEMPERATURE

• Display the daily outdoor minimum and maximum temperature of the currently selected

channel.

DCF-77 RADIO CONTROLLED TIME:

The time base for the radio controlled time is a Cesium Atomic Clock operated by the

Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less than

one second in one million years. The time is coded and transmitted from Mainflingen near

Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately

1,500 km. Your radio-controlled Weather station receives this signal and converts it to show the

precise time in summer or wintertime. The quality of the reception depends greatly on the

geographic location. In normal cases, there should be no reception problems within a 1,500 km

radius around Frankfurt.

Once the outdoor temperature is displayed on the Weather station after initial set-up, the DCF

tower icon in the clock display will start flashing in the upper left corner. This indicates that the

clock has detected that there is a radio signal present and is trying to receive it. When the time

code is received, the DCF tower becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then

please take note of the following:

• Recommended distance to any interfering sources like computer monitors or TV sets is a

minimum of 1.5 - 2 metres.

• Within ferro-concrete rooms (basements, superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit close to a window and/or point its front

or back towards the Frankfurt transmitter.

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

• LCD contrast setting

• Time zone setting

• Time reception ON/OFF setting

• 12/24-Hour setting

• Manual time setting

• Calendar setting

• °C/ °F setting

• Weather forecasting icon sensitivity setting

Press the SET key to advance to the setting mode:

LCD CONTRAST SETTING

The LCD contrast can be set to 8 different levels to suit the users needs (default LCD contrast

setting is LCD 4). To set the desired contrast level:

1. The above display will be seen. Press the + key to select the level of contrast desired.

2. Press the SET key to confirm and enter the “Time Zone setting” or exit the setting mode

by pressing the CH key

TIME ZONE SETTING:

flashing

The time zone default is "0 hour". To set a different time zone:

1. The current time zone value starts flashing.

2. Use the + key to set the time zone. The range runs from 0, -1, -2…-12, 12, 11, 10… 2, 1,

0, in consecutive 1-hour intervals.

3. Confirm with the SET key and enter the Time reception On/ Oﬀ setting.

TIME RECEPTION ON/OFF SETTING

flashing

Flashing

(time reception icon)

In area where reception of the radio-controlled time (DCF time) is not possible, the time

reception function can be turned OFF. The clock will then work as a normal Quartz clock.

(Default setting is ON).

1. The digit “ON” and the time reception icon will start flashing on the LCD.

2. Use the + key to turn OFF the time reception function.

3. Confirm with the SET key and enter the or exit the setting “12/24-Hour Display setting”

mode by pressing the CH key.

Note:

If the Time Reception function is turned OFF manually, the clock will not attempt any

reception of the radio-controlled time (DCF time) as long as the Time Reception OFF

function is activated. The Time Reception icon will not be displayed on the LCD.

12/24 HOUR TIME DISPLAY SETTING

flashing

1. After setting time reception ON/OFF, press the SET key, “12h” or “24h” flashes in the LCD.

(default 24 h)

2. Press the + key to select the “12h” or “24h” display mode.

3. Press the SET again to confirm and to enter the “Manual Time setting” or exit the setting

mode by pressing the CH key.

Note: When 24h mode display is selected, the calendar format will be "Day. Month." display.

When 12h mode display is selected, the calendar format will be "Month. Day." display.

MANUAL TIME SETTING

In case the Weather station is not able to detect the radio-controlled time (DCF time) signal

(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work

as a normal Quartz clock.

Hours (flashing)

Minutes (flashing)

To set the clock:

1. The hour digits start flashing in the time display section.

2. Use the + key to adjust the hours and then press SET key to go to the minute setting.

3. The minute will be flashing. Press the + key to just the minutes.

4. Confirm with the SET key and enter the “Calendar Setting” or exit the setting mode by

pressing the CH key

CALENDAR SETTING

Year

°C/°F TEMPERATURE UNIT SETTING

flashing

The default temperature reading is set to °C (degree Celsius).

To select °F (degree Fahrenheit):

1. The “°C or F” will be flashing, use the + key to toggle between “°C” and “°F”. °

2. Once the desired temperature unit has been chosen, confirm with the SET key and enter

the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by pressing the

CH key.

WEATHER FORECASTING ICON SENSITIVITY SETTING

For locations with rapid changes of weather conditions, the threshold can be set to a different

level for faster display of changing weather conditions.

Sensitivity level

(flashing)

1. Using the + key to set the weather sensitivity level. There are 3 levels of setting: 2, 3 and

4 (hPa). It is the threshold value of pressure change that will activate a change in weather

icon. For example, when "2" is selected, it means that a change in 2 hPa will make the

weather icon change. So '2" is the most sensitive setting, "4" is the least sensitive setting

(default setting is "3").

2. Confirm with the SET key and exit the Manual settings.

WEATHER FORECAST AND TENDENCY:

The weather forecast icons (Weather girl):

One of the 15 different weather icons (featured by Weather girl with different clothing) is

displayed in the centre of LCD, which indicate the different forecast weather condition due to air

pressure level (Sunny, Sunny + Cloudy or Cloudy + Rainy) and the current outdoor temperature

(Temperature value detected by Transmitter channel 1) :

≥

≥≥ °

°° 78.8 F

(≥

≥

≥≥ 26°

°°C)

66.2 to 78.6°

°°F

(19 to 25.9°

°°C)

50 to 66°

°°F

(10 to 18.9°

°°C)

32 to 49.8°

°°F

(0 to 9.9°

°°C)

< 32°

°°F

(< 0°

°°C)

Sunny

For every sudden or significant change in the air pressure, the weather icons will update

accordingly to represent the change in weather. If the icons do not change, then it means either

the air pressure has not changed or the change has been too slow for the Weather Projection

Station to register. However, if the icon displayed is a sun or raining cloud, there will be no

change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since

the icons are already at their extremes.

The icons displayed forecasts the weather in terms of getting better or worse and not necessarily

sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy

icon is displayed, it does not mean that the product is faulty because it is not raining. It simply

means that the air pressure has dropped and the weather is expected to get worse but not

necessarily rainy.

Note :

After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours.

This will allow sufficient time for the Weather Station to collect air pressure data at a constant

altitude and therefore result in a more accurate forecast.

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather

forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas

the Weather Station has been designed for use in. In areas that experience sudden changes in

weather (for example from sunny to rain), the Weather Station will be more accurate compared

to use in areas where the weather is stagnant most of the time (for example mostly sunny).

If the Weather Station is moved to another location significantly higher or lower than its initial

standing point (for example from the ground floor to the upper floors of a house), remove the

batteries and re-insert them after about 30 seconds. By doing this, the Weather Station will not

mistake the new location as being a possible change in air-pressure when really it is due to the

slight change of altitude. Again, disregard weather forecasts for the next 12 to 24 hours as this

will allow time for operation at a constant altitude.

THE WEATHER TENDENCY INDICATOR

Working together with the weather icons are the weather tendency indicators (the upward and

downward arrows located on the right hand side of the weather girl icon). When the indicator

points upwards, it means that the air-pressure is increasing and the weather is expected to

improve, but when indicator points downwards, the air-pressure is dropping and the weather is

expected to become worse.

Therefore, user may see how the weather has changed and is expected to change. For example,

if the indicator is pointing downwards together with cloudy icons, it means that the last noticeable

change in the weather was when it was sunny (the sunny icon only). Therefore, the next change

in the weather will be the cloudy icons since the indicator is pointing downwards.

Note:

Once the weather tendency indicator has registered a change in air pressure, it will remain

permanently visualized on the LCD.

DISPLAY OF INDOOR TEMPERATURE AND HUMIDITY READING:

The indoor temperature and humidity are measured and displayed on the second section of the

LCD.

DISPLAY OF OUTDOOR TEMPERATURE AND HUMIDITY READING:

The outdoor temperature and humidity are measured and displayed on the fourth section of the

LCD.

Indoo

Temperature

Indoor Relative

Humidity %

Indoor icon

Outdoor

Humidity

Transmitter identification No.

(shown when more than one

transmitter is used)

Outdoor icon

Outdoor

Temperature

Note:

The channel number will shown if more than one transmitter has been used.

DISPLAY OF OUTDOOR MAXIMUM AND MINIMUM RECORDS:

1. In normal display mode, press the CH button to select the desired channel. The channel

ID will be displayed next to the outdoor temperature reading.

2. Press the MIN/MAX button once, the max outdoor temperature and humidity of the

selected channel will be displayed. Also the time and date of recording this temperature

will be displayed:

Note: The time and date of recording the min/max humidity reading will not be shown.

3. By pressing MIN/MAX button once more, the min temperature and humidity of the

selected channel will be shown. Also the time and date of recording this temperature will

be displayed.

Outdoor icon

Time and date

of recording

the Max

temperature

Channel No.

temperature Max icon

Max humidity

4. Press one more time the MIN/ MAX button to advance to the indoor Max/ Min temp

display.

Note: The time of recording the minimium or maximum humidity is not recorded.

RESETTING THE OUTDOOR MAXIMUM/ MINIMUM RECORDS

Note:

• It is required to reset the outdoor max/ min records of different channels separately.

• The outdoor minimum and maximum records are to be reset separately.

1. In normal display mode, press the CH button to select a channel. The channel

Identification No. (channel No.) will be displayed near the outdoor temperature reading.

Note: The transmitter number will only be displayed if more than one transmitter is

applied.

2. Press the MIN/MAX button once. The "max" icon will be displayed.

3. Press the SET button, this will reset the outdoor maximum temperature, humidity and

time (of recording the temp) to the current value.

4. Press MIN/ MAX button once more to show the minimum data. The "min" icon will be

displayed.

5. Press the SET button, this will reset the outdoor minimum temperature , humidity and

time (of recording the temp) record to the current value.

6. Press three more times the MIN/MAX key to return to the normal display.

DISPLAY OF INDOOR MAXIMUM AND MINIMUM RECORDS:

1. In normal display mode, press the MIN/MAX button three times. The maximum indoor

temperature and humidity will be shown in the bottom section of LCD. Also the time and

date of recording this temperature will be displayed.

2. Then press the MIN/MAX button one more time, the minimum indoor temperature and

humidity will be shown in the bottom section of LCD. Also the time and date of recording

this temperature will be displayed:

Indoor icon

Time and date of

recording the Min

temperature

Min temperature

Min icon

Min humidity

3. Press one more time the MIN/ MAX button to go back to the normal display.

Note: The time of recording the minimium or maximum humidity is not recorded.

RESETTING THE INDOOR MAXIMUM/ MINIMUM RECORDS

1. In normal display mode, press the MIN/MAX button three times to advance to the indoor

MAX display.

2. Press the SET key once, this will reset the currently shown indoor maximum temp ,

humidity and time (of recording the temp) to the current time, date and temperature.

3. Press the MIN/MAX button once more to advance to the indoor MIN display.

4. Press the SET key once, this will reset the currently shown indoor minimum temp ,

humidity and time (of recording the temp) to the current time, date and temperature.

5. Press the MIN/MAX button once more to return to the normal display.

DAILY MIN AND MAX OUTDOOR TEMPERATURE DISPLAY

This weather station will display the daily maximum and minimum outdoor temperature for each

outdoor channel, at the bottom of the LCD, in normal display.

Channel No.

Max daily temp of

the channel

Min daily temp

of the channel

To view the daily max and min temperature of another channel, user shall press the CH key in

normal display.

Note:

The daily minimum temperature record is reset automatically at 8:00 pm and the daily maximum

temperature is reset automatically at 8:00 am every day.

868 MHz RECEPTION

The Weather station should receive the temperature data within 5 minutes after set-up. If the

outdoor data signal cannot be received 5 minutes after setting up or in normal mode the signal

reception is "disturbed" continuously, the outdoor display will show “- - -” . Then user shall check

the following points:

MOUNTING

POSITIONING THE WEATHER STATION:

The Weather Station may be hung onto wall easily or free standing.

To wall mount

Choose a sheltered place. Avoid direct rain and sunshine.

received from the d

Before wall mounting, please check that the outdoor temperature and humidity values can be

esired locations.

1. Fix a screw (not supplied) into the desired wall, leaving the head

extended out the by about 5mm.

2. Hang the station onto the screw. Remember to ensure that it locks

into place before releasing.

Free standing

With the stand, the weather station can be placed onto any flat surface.

POSITIONING THE THERMO-HYGRO TRANSMITTER:

The Transmitter is supplied with a holder that may be attached to a wall with the two screws

supplied. The Transmitter can also be position on a flat surface by securing the stand to the

bottom to the Transmitter.

To wall mount:

1. Secure the bracket onto a desired wall using the screws and plastic

anchors.

2. Clip the remote thermo-hygro transmitter onto the bracket.

Note:

Before permanently fixing the transmitter wall base, place all units in the desired locations to

check that the outdoor temperature reading is receivable. In event that the signal is not received,

relocate the transmitters or move them slightly as this may help the signal reception.

CARE AND MAINTENANCE:

• Extreme temperatures, vibrations and shocks should be avoided as these may cause

damage to the unit and give inaccurate forecasts and readings.

• When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or

scouring agents as they may mark the LCD and casings.

• Do not submerge the units in water. Furthermore, fix all parts in place where the units are

adequately protected against moisture and rain.

• Immediately remove all low powered batteries to avoid leakage and damage. Replace

only with new batteries of the recommended type.

• Do not make any repair attempts to the unit. Return them to their original point of

purchase for repair by a qualified engineer. Opening and tampering with the unit may

invalidate their guarantee.

• Do not expose the units to extreme and sudden temperature changes, this may lead to

rapid changes in forecasts and readings and thereby reduce their accuracy.

SPECIFICATIONS:

Temperature measuring range:

Indoor : -9.9ºC to +59.9ºC with 0.1ºC resolution (14.1°F to +139.8°F with 0.2°F

resolution); “OF.L” displayed if outside this range

Outdoor : -39.9ºC to +59.9ºC with 0.1ºC resolution (-39.8°F to +139.8°F with 0.2°F

resolution); “OF.L” displayed if outside this range

Relative humidity measuring range:

Indoor: 1% to 99% with 1% resolution (displays “- -” when lower than 1 %;

displays "99" % if higher than 99 %)

Outdoor: 1% to 99% with 1% resolution (displays “ ”1 when lower than 1 %;

displays "99" % if higher than 99 %)

Indoor temperature checking interval : every 15 seconds

Indoor humidity checking interval : every 20 seconds

Outdoor data reception : every 4 seconds

Power supply:

Weather station : 2 x AA, IEC, LR6, 1.5V

Thermo-hygro transmitter : 2 x AA, IEC, LR6, 1.5V

Battery life cycle (Alkaline batteries recommended)

Weather station : Approximately 24 months

Thermo-hygro transmitter : Approximately 24 months

Dimensions (L x W x H)

Weather station : 122.8 x 23.1 x 169.7 mm (4.83" x 0.91" x 6.68")

Thermo-hygro transmitter : 38.2 x 21.2 x 128.3 mm (1.50" x 0.83" x 5.05")

Produkt Specifikationer

Mærke:	Techno Line
Kategori:	Vejrstation
Model:	WS 9624 IT

Har du brug for hjælp?

Hvis du har brug for hjælp til Techno Line WS 9624 IT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation Techno Line Manualer

Techno Line WS 9632 Manual

4 Januar 2025

Techno Line WS 9620 Manual

27 December 2024

Techno Line WS 9310 Manual

27 December 2024

Techno Line WS 9135 Manual

27 December 2024

Techno Line WS 6870 Manual

27 December 2024

Techno Line WS 9450 Manual

27 December 2024

Techno Line WS 9257 Manual

27 December 2024

Techno Line WS 9125 Manual

27 December 2024

Techno Line WS 9060 Manual

27 December 2024

Techno Line MA 10920 Manual

27 December 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Bresser VentAir V Manual

14 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025