Tefal Liss&Curl Pro HS6150 Manual
Tefal
Styling jern
Liss&Curl Pro HS6150
Læs nedenfor 📖 manual på dansk for Tefal Liss&Curl Pro HS6150 (3 sider) i kategorien Styling jern. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
Please read the safety instructions before use
1.GENERAL DESCRIPTION
A. Tongs
B. ON/OFF switch
C. Smoothing plates with Ultrashine Nano Ceramic coating
D. Floating lower plate
E. Pro-Curling System curling tongs
F. LCD display
G. Buttons -/+ for reducing/increasing the temperature
1. 10 temperature positions (130 => 230°C)
2. Temperature locking/unlocking
H. Lock System (to lock and unlock the tongs)
2. SAFETY INSTRUCTIONS
• For your safety, this appliance complies with the applicable standards and regulations
(Low Voltage Directive, Electromagnetic Compatibility, Environmental…).
• Make sure that the supply cord never comes into contact with the hot parts of the
appliance.
• Check that the voltage of your electricity supply matches the voltage of your appliance.
Any error when connecting the appliance can cause irreparable harm, not covered by the
guarantee.
• For additional protection, the installation of a
residual current device (RCD) having a rated
residual operating current not exceeding 30 mA
is advisable in the electrical circuit supplying
the bathroom. Ask for installer for advice.
• The installation of the appliance and its use must however comply with the standards in
force in your country.
• WARNING: do not use this appliance
near bathtubs, showers, basins or other
vessels containing water.
• When the appliance is used in a bathroom,
unplug it after use since the proximity of water
presents a hazard even when the appliance is
switched off.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
• This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
• Stop using your appliance and contact an Authorised Service Centre if:
- your appliance has fallen.
- it does not work correctly.
• The appliance must be unplugged:
- before cleaning and maintenance procedures.
- if it is not working correctly.
- as soon as you have finished using it.
- if you leave the room, even momentarily.
• Do not use if the cord is damaged.
• Do not immerse or put under running water, even for cleaning purposes.
• Do not hold with damp hands.
• Do not hold the appliance by the casing, which is hot, but by the handle.
• Do not unplug by pulling on the cord, rather pull out by the plug.
• Do not use an electrical extension lead.
• Do not clean with abrasive or corrosive products.
• Do not use at temperatures below 0°C and above 35°C.
GUARANTEE
This product has been designed for domestic use only. Any commercial use, inappropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility
and the guarantee will not apply.
3. BRINGING INTO SERVICE
1. Lock System (Fig. 1) : To open the clamps, pull the Lock System back. To lock the clamps:
close the clamps and push the "Lock System“ to the front.
2. Plug in the appliance.
3. Set the ON / OFF switch to position I. (B)
4. Your appliance will heat up very quickly and the temperature will remain stable throu-
ghout use. (Fig. 2)
5. Select the ideal temperature for your hair using the -/+ buttons (fig. 3):
press the – button to reduce the temperature or the + button to increase it.
The temperature indicator flashes until the selected temperature is reached.
6. After use: Place ON/OFF (B) switch in the stop position (0), close the clamps, use the
"Lock System", unplug the appliance and leave it to cool down completely before putting
it away.
Note: To avoid any handling error (inadvertently pressing the +/- buttons during use)
this appliance is equipped with a locking function.
If you wish to lock your temperature setting during use, press the + or – button for 2
seconds. Your setting is being locked, a padlock appears on the screen.
If you wish to change your appliance’s temperature, you will need to unlock it by again
pressing the + or – button for 2 seconds. Your setting is being unlocked, the padlock
disappears from the screen. You can change the temperature by pressing the buttons +/-.
Automatic cut out:
For your safety the appliance will cut out automatically after 60 min. If you wish to turn it
on again follow the instructions given in SWITCHING ON.
4. USE
4.1 - How should you straighten your hair?
Hair must be untangled, clean and dry.
• Do not use the appliance on synthetic hair (wigs, extensions, etc.).
• Form a small lock a few centimetres in width, comb it and place it between the plates.
Hold the hair firmly between the plates and slide the appliance slowly from the roots to
the tip of the hair.
• The ceramic coating on the plates protects your hair against overheating by uniformly
spreading the heat.
• Wait for the smoothed hair to cool down before styling.
4.2 - How should you curl, style your hair?
Curling technique:
1. Place a lock of hair between the plates, at the roots (as if you were straightening your
hair). (Fig. 4)
2. Turn the appliance through a half-turn (180°). (Fig. 5)
3. Slowly slide the appliance down to the tips of your hair. Remove the appliance, the curl
is taking shape. (Fig. 6)
5. MAINTENANCE
CAUTION! Always unplug your appliance and allow it to cool before cleaning it.
• To clean the appliance, unplug it and then wipe with a damp cloth and dry with a dry
cloth.
6. TROUBLESHOOTING
• You’re not happy with the results you’re getting from your straightener:
- Press the straightener plates more firmly against your hair section.
- Slide your straightener more slowly.
- Increase the temperature using the “+” button.
• It’s impossible to change the temperature?
- Check that the temperature level isn’t locked.
• The top plate isn’t static.
- This is quite normal, the straightener is fitted with a mobile plate to get better
results from your straightener.
• The straightener automatically switches itself off after a while:
- This is quite normal, this straightener has an automatic switch-off system. Please refer to
the paragraph on “automatic switch-off”.
7. ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
These instructions are also available on our website www.
tefal.com
EN
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
www.tefal.com 1800135412
Liss & curl pro
EN
KO
A
E
C
B
D
F
H
G
1
2
Produkt Specifikationer
| Mærke: | Tefal |
| Kategori: | Styling jern |
| Model: | Liss&Curl Pro HS6150 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Tefal Liss&Curl Pro HS6150 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Styling jern Tefal Manualer
20 Maj 2024
13 November 2023
5 September 2023
26 August 2023
14 Maj 2023
Styling jern Manualer
- Styling jern Sinbo
- Styling jern SilverCrest
- Styling jern OBH Nordica
- Styling jern Sencor
- Styling jern Beurer
- Styling jern Gorenje
- Styling jern Philips
- Styling jern Concept
- Styling jern Vitek
- Styling jern Braun
- Styling jern ProfiCare
- Styling jern BaByliss
- Styling jern Grundig
- Styling jern Livoo
- Styling jern Trisa
- Styling jern Princess
- Styling jern Severin
- Styling jern Imetec
- Styling jern TriStar
- Styling jern Adler
- Styling jern Camry
- Styling jern Blaupunkt
- Styling jern Clatronic
- Styling jern Rowenta
- Styling jern Remington
- Styling jern Fagor
- Styling jern Zelmer
- Styling jern Orbegozo
- Styling jern Taurus
- Styling jern MPM
- Styling jern GlobalTronics
- Styling jern Unold
- Styling jern Carmen
- Styling jern Cleanmaxx
- Styling jern Fakir
- Styling jern Ardes
- Styling jern Scarlett
- Styling jern Izzy
- Styling jern ECG
- Styling jern Saturn
- Styling jern Eldom
- Styling jern Maxwell
- Styling jern Cecotec
- Styling jern GHD
- Styling jern Conair
- Styling jern Ufesa
- Styling jern Orava
- Styling jern Maestro
- Styling jern Revlon
- Styling jern Petra Electric
- Styling jern Revamp
- Styling jern WAD
Nyeste Styling jern Manualer
15 November 2024
11 November 2024
15 Oktober 2024
12 Oktober 2024
12 Oktober 2024
15 September 2024
11 September 2024
11 September 2024
11 September 2024
3 September 2024