Thermex Mini Jet-dryer Manual

Thermex Håndtørrer Mini Jet-dryer

Læs nedenfor 📖 manual på dansk for Thermex Mini Jet-dryer (1 sider) i kategorien Håndtørrer. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
120cm 108cm
130cm 115cm
140cm
150cm 129cm
160cm 136cm
170cm 143cm
180cm 150cm
122cm
44mm
44mm
152m m
280x153x162mm
5
5
5
55
6mm
Inlet grille
Installation
panel
Inlet grille
Upper cover
Lover cover
Core
structure
Pencil
Pistol
drlling
Expansion
pipe
Self tapping
screw
Hook up
Hook
groove
Safety
screw
Safety screw hole
Φ6mm
Drawing the position of mounting
holes
Accord ing to the installation position,
put the mounting plate with o ne hand
gently holding in the place which the
machine will be installed. Then use
the other hand to draw the positions
of mounting holes in pencil or draw
them directly according to the size.
Drilling holes
In accordance with the drawn holes
position, drill fo ur holes 6 mm in
diameter and press the expansion
pipes into four holes location.
Fixing the mounting plate
Direct the installation holes of the
installation panel at the e xpansion
pipes and fix them with self- threading
cross screws.
Installing the machine
The mounting plate has protrudent
hooks formed for inserting in to the
slots to hang the machine on it. Press
down the machin e until the anti-theft
screw holes on machine and mounting
plate are aligned.
Fixing anti-theft screws
Screw anti-theft bolts in the bolt
holes to fix the ma chine on the
mounting p late.
Install the air intake grill in the
machine and make sure the grill
is locked.
3 4kg.
68m s/
2805SM004 V2.1-
Place with temperature below 10 or over 40 - ℃


Produkt Specifikationer

Mærke: Thermex
Kategori: Håndtørrer
Model: Mini Jet-dryer

Har du brug for hjælp?

Hvis du har brug for hjælp til Thermex Mini Jet-dryer stil et spørgsmål nedenfor, og andre brugere vil svare dig