TOA GS-302 Manual

TOA Højttaler GS-302

Læs nedenfor 📖 manual på dansk for TOA GS-302 (2 sider) i kategorien Højttaler. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

• Be sure to read the instructions in this section carefully

before use.

• Make sure to observe the instructions in this manual as the

conventions of safety symbols and messages regarded as

very important precautions are included.

• We also recommend you keep this instruction manual handy

for future reference.

INSTRUCTION MANUAL

GARDEN SPEAKER GS-302

Please follow the instructions in this manual to obtain the

optimum results from this unit.

We also recommend that you keep this manual handy

for future reference.

The GS-302 is a compact Garden Speaker ideal for paging

and background music broadcast in such places as gardens,

theme parks and resort facilities.

Corrosion resistant material is adopted to the speaker exterior,

ensuring prolonged use of the speaker in a water-splashed

environment.

The appearance of Garden Speaker is desig ned so

inconspicuous that the speaker can be installed in shrubberies

of garden blending with the surroundings.

1. SAFETY PRECAUTIONS

2. GENERAL DESCRIPTION

WARNING

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

CAUTION

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

• Leave the installation to your TOA dealer because the

installation requires expert knowledge. Improper installation

may cause the unit to fall, resulting in personal injury and/or

property damage.

• Should the following irregularity be found during use,

immediately stop operating the unit and contact your nearest

TOA dealer. Further attempt to use under this condition may

cause fire or electric shock.

· If you detect smoke or a strange smell coming from the unit

· If no tone sounds

• Do not kick nor stand on the unit as this may cause it to

break, resulting in personal injury.

• Avoid installing the unit in locations where it may be directly

splashed by sprinklers or by hosing, as doing so may result

in fire or electric shock.

• Do not operate the unit for an extended period of time with

the sound distorting. This is an indication of a malfunction,

which in turn can cause heat to generate and result in a fire.

3. INPUT SETTINGS

Note: The speaker operates on a 100 V line (high impedance

line). Never connect the speaker to a low impedance

line as it may be damaged.

3.1. When Using the Speaker at the Factory-preset Input

The speaker's input is factory-preset to 15W (670 Ω).

Note: To change the factory-preset input, be sure to read the

next paragraph.

Attach the supplied TOA label

(2 sheets) to the side of top

cover in the way it hides the

fixing screw head.

Tip

The TOA labels hide the

fixing screw heads on the

top cover for tamper

prevention purpose.

3.2. When Changing the Input

The speaker's input is factory-preset to 15 W (670 Ω).

Step 1. Remove the top cover.

Unscrew 2 fixing screws

securing the top cover,

and lift the top cover in

the arrow direction shown

at right.

Step 2. Disconnect the black lead from the input terminal, and

reconnect it to the terminal of desired input.

Turn the terminal screw counterclockwise to pull out a

lead, and clockwise to tighten it.

For the connection to the input terminal, refer to the

input terminal label inside the case.

Note

Be sure to tighten unused terminal screws to avoid

their vibration.

Fixing screw

(another on the

other side)

TOA label

(accessory)

Lift the top cover.

Fixing screw

(another on the

other side)

Top cover

Unscrew

Tighten

Input terminal label

Input terminal block

Black lead

Waterproof gasket

Example for changing input

from 15 W (factory-preset) to 5 W

Black lead

Pull out

Insert

Terminal screw

GRN

BRN

RED

ORG

YEL

3 W

100 V

LINE 5 W 10 W 15 W 30 W

1.5 W

70 V

LINE 2.5 W 5 W 7.5 W 15 W

Input terminal label

日本語の取扱説明書は裏面をご覧ください。

Produkt Specifikationer

Mærke:	TOA
Kategori:	Højttaler
Model:	GS-302

Har du brug for hjælp?

Hvis du har brug for hjælp til TOA GS-302 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler TOA Manualer

7 Oktober 2024

26 September 2024

23 September 2024

23 September 2024

23 September 2024

23 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Canton Chrono SL 520.2 Manual

16 December 2024

Canton GLE 456 Center Manual

16 December 2024

Canton Vento 820.2 Manual

16 December 2024

Canton Chrono SLS 780 DC Manual

16 December 2024

Canton In Wall 500 LCR Manual

16 December 2024

Canton InWall 949 LCR Manual

16 December 2024

Canton InWall 845 LCR Manual

16 December 2024

Canton InCeiling 855 Manual

16 December 2024

Canton Atelier 950 Manual

16 December 2024

Canton InWall 465 Manual

16 December 2024