Topeak NINJA CO2 Manual


Læs nedenfor 📖 manual på dansk for Topeak NINJA CO2 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
User's Guide
NINJA CO2+ / NINJA CO2
EN
HOW TO USE MICRO AIRBOOSTER
WARNING
• Accepts all 16g threaded CO cartridges.2
• Recommended to use Topeak 16g threaded CO cartridges.2
• Please read all instructions before first use.
• Periodically check that components are still securely
fastened to your bike.
• Compatible with Ninja Cage series.
• If using the Micro AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the
rubber grommet inside the inflation head to return to its original position. Otherwise, a gas leak may occur and
prevent proper inflation.
• Tighten the CO2 2 cartridge before using CO inflation function. Failure to do so will cause improper operation and
may cause injury.
• DO NOT remove CO2 2 cartridge if it is still charged with gas. Completely discharge the CO cartridge before removal.
• When opening the CO2 cartridge, point the inflator head away from yourself and others.
• DO NOT use Micro AirBooster Inflator if any part is cracked or broken.
• DO NOT expose the CO2 cartridge to heat, or store at temperatures above 120˚F (49˚C), or store in enclosed vehicles.
• Make sure to wear gloves when inflating to avoid injury.
• The barrel and CO2 cartridge may become extremely cold/ frosty when the CO gas is expelled. 2
• DO NOT try to unscrew the Micro AirBooster inflation head until it has warmed sufficiently to touch.
• Keep out of reach of children.
Presta Valve
Thread-in CO cartridge. Loosen valve core before inflation.2
1 2
Start and regulate CO flow by pushing 2
inflation head onto valve stem.
3
Install and thread-in inflation head
to Schrader valve.
Schrader Valve
Thread-in CO cartridge. Start and regulate CO flow by pushing 2 2
inflation head onto valve stem.
1 2 3
After each inflation, make sure
all CO
2
gas has been discharged
by pushing the Micro AirBooster
inflation head several times.
Micro AirBooster16g Topeak
Threaded CO 2
Cartridge x 2
CO Cartridge 2
Engagement
Inflation Head
To avoid possible personal
injury and damage to bike
and /or tool, ensure to
disengage CO inflator 2
properly after use by
unthreading inflation head
in correct direction.
NOTE
Tire Lever
NINJA CO2+ NINJA CO2
YES NO


Produkt Specifikationer

Mærke: Topeak
Kategori: Ikke kategoriseret
Model: NINJA CO2

Har du brug for hjælp?

Hvis du har brug for hjælp til Topeak NINJA CO2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Topeak Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024