Topeak Sport Camera Multi-Mount Manual

Topeak Ikke kategoriseret Sport Camera Multi-Mount

Læs nedenfor 📖 manual på dansk for Topeak Sport Camera Multi-Mount (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
1 2
2
3
3 41
Back
Side
SPORT CAMERA MULTI-MOUNT
User's Guide
INSTALLATION OF MOUNT A (for GoPro® HERO series and Shimano® Sport Camera)
INSTALLATION OF MOUNT B (for SONY® Action Cam / Mini)
• PLEASE READ ALL INSTRUCTIONS BEFORE FIRST USE!
• Design for GoPro® HERO series, Shimano® Sport
Camera and SONY® Action Cam / Mini only.
• Maximum Weight Capacity: 200 g / 7.05 oz
MOUNT ON HANDLEBAR
Accessories Required:
• Make sure all brackets are installed properly before riding. • NEVER exceed maximum weight capacity.
• Sport Camera Multi-Mount is designed for GoPro® HERO series, Shimano® Sport Camera and SONY® Action Cam / Mini only. DO NOT use with other types of cameras or digital devices.
IMPORTANT NOTES
MOUNT ON HELMET MOUNT ON SADDLE RAIL
GB
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a
sales receipt will assume that the warranty begins on the date of manufacture. All warranties will
be void if the product is damaged due to user crash, abuse, system alteration, modification, or
used in any way not intended as described in this manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
* Shimano® is registered trademark of Shimano Inc.
* SONY® is registered trademark of Sony Corporation.
* Designed for use with GoPro® products. GoPro® is a registered trademark of GoPro, Inc.
Copyright © Topeak, Inc. 2015 M-TC3010-GB 05/15
WARRANTY
1
for SONY® Action
Cam / Mini
for GoPro®
HERO series
and Shimano®
Sport Camera
Mount BMount A
Handlebar Bracket
Rubber Pad x 6 pcs
Helmet Bracket
FRONT
BACK
Locking Lever
Release Lever
Adjusting Button
Install the device
on Mount A as
shown.
Install Handlebar Bracket
and tighten the screw.
1Install Saddle Rail Bracket and
tighten the screw.
Follow mounting procedure above
to install your device on
multi-mount.
Install proper size of Rubber Pad
then tighten the screw.
Tighten the
included screw.
GoPro®GoPro®
GoPro®
GoPro®
Shimano® Sport
Camera
Saddle Rail Bracket
with
M5 x 25 mm Screw
for ø mm22.2
Handlebar
M4 x 8 mm
Screw
M4 x 8 mm Screw M4 x 8 mm Screw
M4 x 8 mm Screw
M5 x 25 mm Screw
M5 x 20 mm Screw
M4 x 8 mm
Screw
M5 x 16 mm
Screw
M5 x 16 mm Screw
3mm Allen Key
x2
x2
x2
for ø 25.4 mm
Handlebar
for ø 31.8 mm
Handlebar
Straps x 2 pcs
2.5 mm Allen Key
3 mm Allen Key
M4 x 8 mm
Screw
2 1 Install Helmet Bracket and
tighten the screw.
Fasten the straps on helmet as shown.
Cut the strap for proper length after
installation.
2Install Saddle Rail Bracket on rail
and tighten the screw.
2
3 4 Follow mounting procedure above
to install your device on
multi-mount.
Press and hold the Adjusting Button
to fine tune for proper angle.
Press and hold the Adjusting Button
to fine tune for proper angle.
Follow mounting procedure above
to install your device on
multi-mount.
3 4 Press and hold the Adjusting Button
to fine tune for proper angle.
3 4
Accessories Required: Accessories Required:
PRESS
and HOLD
2.5 mm Allen Key
1.5 N.m/ 13.27 in-lb
2.5 mm Allen Key
1.5 N.m/ 13.27 in-lb
3 mm Allen Key
1.5 N.m/ 13.27 in-lb
2.5 mm Allen Key
1.5 N.m/ 13.27 in-lb
3 mm Allen Key
1.5 N.m/ 13.27 in-lb
Short
edge
Long
edge
PRESS and HOLD
HANDLEBAR Mount Kits
MOUNTS
HELMET Mount Kits
SADDLE RAIL Mount Kits
TOOLS Included
PRESS
and HOLD
Install SONY® Action Cam in original
waterproof case, then combine the
device with Mount B as shown.
Open the
locking lever
completely
then install
the device on
Multi-Mount.
Press Locking
Lever for
security.
Press
Locking
Lever for
security.
HOW TO RELEASE
1. Open the Locking
Lever completely.
2. Press and hold
the Release Lever.
3. Remove your device.
PRESS
Open the locking
lever completely
then install the
device on
Multi-Mount.
Multi-Mount
Remove the included
screw first
You can also use SONY® Action
Cam / Mini with original Tripod
Adaptor on Mount B.
You can use GoPro®
original screw too.


Produkt Specifikationer

Mærke: Topeak
Kategori: Ikke kategoriseret
Model: Sport Camera Multi-Mount

Har du brug for hjælp?

Hvis du har brug for hjælp til Topeak Sport Camera Multi-Mount stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Topeak Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Zipper

Zipper ED500FW Manual

22 December 2024
Roland

Roland PDQ-8 Manual

22 December 2024
Panasonic

Panasonic DMW-LMCH62E Manual

21 December 2024
Philips

Philips DLP2015 Manual

21 December 2024
Philips

Philips SWV3034S Manual

21 December 2024
Philips

Philips CDR24D24H Manual

21 December 2024
Philips

Philips DVDRW1S04 Manual

21 December 2024
Philips

Philips CD74R Manual

21 December 2024