TP-Link ER605 v2 Manual

TP-Link Router ER605 v2

Læs nedenfor 📖 manual på dansk for TP-Link ER605 v2 (2 sider) i kategorien Router. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Installation Guide

LED Explanation

Connection

Conguration

ER605

Modem

Internet

On: Power on

O: Power o

Power/PWR

Flashing: System running normally

On/O: System running abnormally

System/SYS

Note: For simplicity, we take ER605 as an example throughout this Guide.

Omada Gigabit VPN Router

Option 1: Standalone Mode

Open a web browser and type the default management address

192.168.0.1 in the address eld of the browser, then press the Enter key.

Connect a computer to a LAN port of the router with an RJ45 cable

properly. If your computer is congured with a xed IP, change it to Obtain

an IP address automatically.

1. For detailed congurations, refer to the User Guide of the router. The guide

can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Create a username and a password for subsequent login attempts and

for security.

Use the username and password set above to log in to the webpage.4.

After a successful login, you can congure the function by clicking the

setup menu on the left side of the screen.

Link/Act and 1000Mbps (for ER7206)

The router supports two conguration options:

Standalone Mode: Congure and manage the router singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: Use the charger provided in the

package to power on the router.