UPM ET160 Manual

UPM Skifte ET160

Læs nedenfor 📖 manual på dansk for UPM ET160 (1 sider) i kategorien Skifte. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

7 8 9 10 11 12

4 5 63

Dim : (58W x 76 H)mm/page

Model : ET-160 -SE-50S

Scale : 1:1

Version : English

Date : July.04.2001.

Manual number : UMTMA2006

LCD Display

On/Off

Set

Down

LCD Display

Countdown

Random

Reset

OPERATION MANUAL

Programmable Microcomputer TIMER

MODEL NO. ET160

Thank you for buying this Programmable Micro Computer

Timer! By setting programs and random functions, you can

turn on and off any plugged-in electrical applicances at your

own selected time or at random intervals.

Operation of this Timer is simple. To obtain the fullest

utilization, please read and follow the instructions carefully.

Features

Real-time Clock with Weekday, Hour, Minute and Second

display in selectable 12 or 24 hour display format

20 On/Off Program Pairs with Weekday, Hour and Minute

setting which can operate individually either on a specific

day, Monday to Friday, Monday to Saturday, during

Weekend or everyday

Countdown Timer with Hour, Minute and Second setting

Programmable Random Timer

Summer/Winter Time Mode

Manual On/Off

Master/individual disable for pre-set program(s)

Battery Installation

Before operating, the two button cell batteries (included)

should be installed into the Timer. To install the batteries,

unplug the Timer, unscrew the 2 small screws at the back and

remove the battery cover. Then place the batteries into the

compartment while observing the correct polarity. Replace

the cover and screws after battery installation.

Note: The batteries serve to back up the clock and

programs while it is unplugged. The battery life is

around 1 year when the Timer is not connected to

the power outlet. If you plan to leave the Timer

unplugged for a long period of time, you may want to

remove the batteries from the Timer.

Reset Function / Abnormal Display

When an abnormal or blank display appears, or if you want to

clear all programs, use a round object such as a ball-point pen

to push the RESET key. After reset, clock and all programs will

be cleared.

If the display is dim or abnormal, you should replace the

button cell batteries.

Operation

The various modes of the Timer are arranged in a circular

pattern as shown below:

Clock Pgm.1 On Pgm.1 Off Pgm.2 On

Pgm.2 Off ... Pgm.20 On Pgm.20 Off

Countdown Clock...

The PROG symbol will light up to denote Program is being

displayed. The CD PROG symbol will light up to denote that

the Countdown Program is being displayed.

To return to the Clock display from other modes, simply

press both and keys together.

Setting the Clock

To set the clock, press the SET key while clock is

displayed. will appear on the display and SET

weekday will be flashing.

Press or (DOWN or UP) key to select the correct

day.Holding the key and it will repeat by itself.

Press key and will be flashing.SET Hour

Repeat Step (2) and (3) until all data have been set.

For the setting of , either or key will set Second

the second to ‘00’.

After all data have been set, will disappear and the SET

Timer will return to the normal clock display.

To change between 12 and 24 hour display, press the

RND key during clock setting.

Setting the Program

With this Timer you can set up to 20 On/ Off Programs. To

set each program, please see the example shown below:

Example of setting program 1:

MO 8:15 ON / MO 15:45 OFF

In this example, the Timer will be turned on at Monday 8:15

and off at 15:45.

Press or key until appears on the PROG 1 ON

display.

Press key and will appear on the display and SET SET

Weekday will be flashing.

Press or key to select the day(s) for Program 1 to

be active. The day displayed will sequence through

MO-SU MO SU MO - FR MO - SA(everyday), to , then ,

and , and repeat again. In this example, the day SA - SU

would be Monday. Press the SET MO key when appears

on the display.

should be flashing. Use or key to change Hour

the hour to 8, then press the key. SET

Minute should be flashing. Change it to 15.

Press key to finish the setting of Program 1-On. SET

Press key and appears at the display. PROG 1 OFF

Use the same method to set the off time.

To set more programs, press the key and PROG 2 ON

appears. Repeat the above procedures to set all programs.

If no key is pressed for 1 minute, the Timer will return to

Clock display automatically.

Setting the Countdown Timer

The countdown timer can be used to turn the timer on or off

for a period from 1 second up to 23 hours 59 minutes 59

seconds.

Example: Set the Countdown Timer to stay On for 1

hour 10 minutes 0 seconds.

Display by using or key.CD PROG

Press key. SET SET ON will light up and the word will

be flashing

Select on/off using or key. Press SET key

when ON is displayed.

Hour should be flashing.Adjust the hour to 1 and SET.

Minute should be flashing. Set minute to 10 and second

to 0 using the same method.

To activate the Countdown Timer, press the key. To stop CD

the countdown, press the key again and the display will CD

return to its pre-set countdown value.

When the Countdown function is operated in clock mode and

timer program mode, CD will be flashing on the display.

Note: Countdown will not start when Random function is

activated. All pre-set programs are also disabled

during the countdown period. Activating the Manual

on/off function will cancel the countdown operation.

Activating the Random Functions

This timer has a built-in random function to automatically

turn the timer on and off at random intervals. This feature is

especially useful for security purpose whenever a home is

left unattended.

3 different Random functions are available:

(1) Short random Timer

(2) Long Random Timer

(3) Program Random Timer

To activate Short Random, press the RND key when Clock

or Program 1-19 is displayed. will flash. To cancel RND

Random function, press key again. Short random RND

cycle is about 1~2 hour.

To activate Long Random, press the RND key when

Countdown Timer is displayed. L-RND will be flashing. Long

random cycle is about 2~4 hour.

The Random functon can be programmed so that it will

activate only during certain period of time (e.g., only at night

time for the house light). To use Program Random, set

Program 20 to the period that you want the Random function

to be activated.

For example, you can set Program 20-On to Mo-Fr 19:30 and

Program 20-Off to Mo-Fr 23:00. Then random function will only

active on weekday evening.

To activate the Program Random, make sure Program 20 is

displayed, then press the key (Pressing the RND RND key

while Program 20 is not displayed will only activate the regular

Random function).

Once Program Random is started,the symbol will stay on RND

during the inactive period and flash during the active period.

Cycle timer is same as in Short Random.

While random function is actived, all pre-set programs

including Countdown Program will be disabled. Activating

Manual On/Off function will cancel the Random function.

Summer/ Winter Time

Holding both and keys at the same time in the Clock

display will change the current time to Summer time mode.

The hour will advance by one and the symbol “ ” will

light up to denote that the Summer time is activated.

Press the 2 keys again in Clock display will return to normal

time.

Manual On/ Off

The Timer can be turned on or off anytime by using the

ON/OFF ON key without affecting the program. The flashing

or will indicate that Manual On/Off function is activated. OFF

Activating the Disable / Master Disable Function

This function allows you to disable any or all of the pre-set

ON/OFF programs. To disable a particular program, display

the program you wish to disable, then press the key. The SET

display will be flashing and the word will light up. SET

Press the key to disable the program and the ON/OFF X

symbol will appear to indicate that particular program is

disabled.

Note: The display is still flashing and if there is no changes

to be made on the pre-set program time, press the

key until the display is not flashing. Use thisSET

function to disable as many available pre-set

programs as you choose.

Press either the or key to scroll through clock and

programs.If the key is pressed for more than 1 second,the

key will repeat itself.

To disable all 20 programs, press the SET key while in

Clock display, then press the ON/OFF key. The X symbol

appears on the Clock Display Mode indicates that all pre-

set programs are disabled.

To cancel this Disable function, just use the same method to

turn off the symbol.X

Technical Specifications

Program: 20 programs per day or per week

Minimum switching time: 1 minute

Ratings: 120V AC 15A

Maximum load: 1,800W resistive

120 V AC

15 A

Summer-Time

Indicator Hour Minute Second

Off Indicator

On Indicator

Disable Indicator

Day

Random Mode

Set Mode

Clock Mode

Countdown Mode

Program Mode

hp://waterheatermer.org/UPM-mers-and-manuals.html

Produkt Specifikationer

Mærke:	UPM
Kategori:	Skifte
Model:	ET160

Har du brug for hjælp?

Hvis du har brug for hjælp til UPM ET160 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte UPM Manualer

15 September 2024

3 September 2024

11 August 2024

10 August 2024

6 August 2024

5 August 2024

5 August 2024

5 August 2024

2 August 2024

2 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Netgear GS110TPP Manual

15 Oktober 2024

ZyXEL SFP-LHX1310-40-D Manual

14 Oktober 2024

Tripp Lite B005-DPUA4 Manual

11 Oktober 2024

Planet DCS-7342-32C2X Manual

8 Oktober 2024

Planet DCS-7342-48Y8C Manual

8 Oktober 2024

Lancom CS-8132F Manual

7 Oktober 2024

Lancom YS-7154CF Manual

7 Oktober 2024

Perel E305W3-G Manual

5 Oktober 2024

Tork SS720A Manual

5 Oktober 2024

Black Box ACX300-R Manual

4 Oktober 2024