UPM TSH723 Manual

UPM Termostat TSH723

Læs nedenfor 📖 manual på dansk for UPM TSH723 (6 sider) i kategorien Termostat. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/6

INDOOR CLOCK WITH

TEMPERATURE & HUMIDITY DISPLAY

TSH723

OWNER’S

MANUAL

LIMITED ONE-YEAR WARRANTY

SET CLOCK (Press buttons in the following order:) SET DATE (Press:)

SET ALARM (Press:)

SET ºC or ºF

SEE MIN. / MAX. DAILY TEMPERATURE

SPECIFICATIONS

1. (press until month / day / weekday appears)MODE

2. SET

3. (to select month)UP or DOWN

4. SET

5. (to select date)UP or DOWN

6. SET

7. (to select weekday)UP or DOWN

8. (to restore normal clock mode)SET / MODE

1. (press until clock display appears)MODE

2. SET

3. (to select hour)UP or DOWN

4. SET

5. (to select minute)UP or DOWN

6. (to restore normal clock mode)SET

1. (press until the alarm clock “bell” appears)MODE

2. SET

3. (to select alarm hour)UP or DOWN

4. SET

5. (to select alarm minute)UP or DOWN

6. SET

7. (ON will display to indicate alarm on / press again to UP

turn alarm off)

1. (press in normal clock mode / ºC or ºF will display)DOWN

1. (press in normal clock mode / Min./Max. temperature UP

will display)

Features:

• Easy-to-read LCD display

• Alarm clock and calendar

• Indoor temperature and humidity display

• Mounts on desk, wall or with magnet

2 x AAA batteries required

Temperature range: -20ºC to +50ºC / -4ºF to +122ºF

Humidity range: 15% to 95%

For indoor use only

For customer service go to: www.upm-marketing.com

Or call: 1-888-GO-TO-UPM (1-888-468-6876)

Low battery symbol

TEMPERATURE

HUMIDITY

TIME OR DATE

MODE

DOWN

SET (on back of unit)

SET 12 or 24 HOUR CLOCK (Press:)

1. (press until alarm clock “bell” appears)MODE

2. (press to toggle between 12 and 24 hours)DOWN

3. Select a time after 12 noon,

- PM = 12 hour mode,

- a number from 13 to 23 = 24 hour mode

4. (to restore normal clock mode - setting will remain)MODE

UPM warrants this product, excluding batteries, to be free from defects

in the materials or workmanship, under normal use and service, for a

period of one (1) year from the date of purchase by the consumer.

If, at any time during the warranty period, the product is defective or

malfunctions, UPM shall replace it (at UPM's discretion) within a

reasonable period of time.

If the product is defective, return it, with a dated proof of purchase, to

the retailer from which you purchased it.

This warranty shall not apply if it is shown by UPM that the defect or

malfunction was caused by damage which occurred while the product

was in the possession of the consumer.

Produkt Specifikationer

Mærke:	UPM
Kategori:	Termostat
Model:	TSH723

Har du brug for hjælp?

Hvis du har brug for hjælp til UPM TSH723 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat UPM Manualer

24 August 2024

18 August 2024

17 August 2024

4 August 2024

1 August 2024

26 Juli 2024

23 Juli 2024

Termostat Manualer

Nyeste Termostat Manualer

Ferguson FS1TH Manual

20 November 2024

Delta Dore TYDOM 1.0 Manual

18 November 2024

Vimar 01910 Manual

17 November 2024

Vimar 01911 Manual

17 November 2024

Vimar 20446 Manual

17 November 2024

Vaillant VRT 15 Manual

15 November 2024

Braeburn 2220 Manual

11 November 2024

Braeburn 2000NC Manual

11 November 2024

Braeburn 5310 Manual

11 November 2024

Braeburn 500 Manual

11 November 2024