V-TAC VT-3216 Manual


Læs nedenfor 📖 manual på dansk for V-TAC VT-3216 (14 sider) i kategorien Skadedyrsbekæmper. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/14
WEEE Number: 80133970
INSTALLATION INSTRUCTION
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
OPERATING INSTRUCTION:
• Check the local voltage before powering the device. Plug in the appliance under normal
input voltage and turn on the switch to the ON side to start the appliance. To shut down the
appliance please turn the switch to OFF side and pull out the plug to cut the power supply.
DO NOT intend to touch the internal high voltage grids when the device is powered on due
to risk of electric shock. Never put metal objects inside the grids while the device is powered
On/Off.
• Repair should be carried out by the manufacturer or qualified electricians. Never remove
any fixed part of the appliance to make any internal adjustment to avoid electric shock. If
the supply cord, the lamp, starters or other part of appliance is damaged, the manufacturer,
its service agent or similarly qualified person must replace it in order to avoid a hazards.
• Unplug the appliance before cleaning. Use suitable brush to clean the high voltage metal
and throw away accumulated insects on collection tray every week. Be sure to cut off
electricity when cleaning and repairing the machine.
• Make sure that your local voltage and frequency is suitable for the machine. Ensure
earthing-connection to prevent damage or danger.
• Don’t touch the high-voltage grid by fingers or metal.
• Non waterproof, no washing by water, no placing in rain. Not suitable for use in garages,
stables and similar environment. Can be cleaned each twice weeks by a brush to clean the
high voltage.
• Not for use in inflammable and/or explosive locales and the similar environment.
WARNING!
• The appliance is indoor use only.
• It is not suitable for use in barns, stables and similar locations.
• The appliance is not to be used in locations where flammable vapors or explosive dust is
likely to exist.
• Only hang or mount the appliance on a place where children can’t reach. (Above 2.0 m).
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
• Please make sure to turn off the power before starting the installation.
• The lamps in this appliance cannot be replaced. Scrap the appliance when the lamps
cease to operate
• High voltage 2200~2500V. Never touch the high tension grid when the appliance is
working. The appliance should be kept away and out of reach from children.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.


Produkt Specifikationer

Mærke: V-TAC
Kategori: Skadedyrsbekæmper
Model: VT-3216

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-3216 stil et spørgsmål nedenfor, og andre brugere vil svare dig