Vanson SMP-20WME Manual


Læs nedenfor 📖 manual på dansk for Vanson SMP-20WME (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
English
GREAT BRITAIN CUSTOMER SERVICE
tel: 0845 300 9799 www.clasohlson.com/ukinternet:
e-mail customerservice@clasohlson.co.uk
Ver. 20140130
AC/DC adaptor
Art.no 18-2271 Model SMP-20WME-UK
36-4219 SMP-20WME
Please read the entire instruction manual before use and save it for future reference. We reserve the right
for any errors in text or images and for making any necessary technical changes to this document. If you
should have any questions concerning technical problems please contact our Customer Services.
Use
1. Find out which of the provided DC connectors fits your product (try them for size loose).
2. There are two polarities for DC voltage, positive and negative. The AC/DC adaptor is made for
devices with a positive (+) or negative (–) central conductor. The polarity of the interchangeable
DC connectors can be reversed to the correct polarity.
3. Check the polarity markings on the product you wish to connect, adjust the DC connectors like this:
- Negative (–) on the centre pin , turn the DC connector
so that the (–) symbol is seen in front of the “TIP” mark.
- Positive (+) on the centre pin , turn the DC connector
so that the (+) symbol is seen in front of the “TIP” mark.
4. Make sure that the DC connector is securely pushed onto the end of the cable.
5. Set the desired output voltage (5 V / 6 V / 7.5 V / 9 V / 12 V / 13.2 V) using a small
screwdriver and plug the cable with the correct DC connector on the end into the
socket of the device to be powered by the adaptor.
6. Make sure that the connected device’s power consumption does not
exceed the adaptor’s maximum output power.
7. Connect the adaptor to a power point, the LED should light up.
8. Switch on the connected device.
Warning!
• The wrong voltage or polarity can damage the connected device.
• Only connect devices that have a power consumption of max 20 W.
• Turn off the connected device before connecting/disconnecting the DC connector.
• Always check the polarity with a multimeter or similar instrument if you are in the least unsure.
• Do not position the product where it is exposed to moisture or water.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how
to dispose of this product, please contact your local authority.
Specifications
Input voltage 100–240 V AC, 50/60 Hz
Output voltage (stabilized) 5 V/6 V 2.5 A max
7.5 V 2 A max
9 V/12 V 1.7 A max
13.2 V 1.5 A max


Produkt Specifikationer

Mærke: Vanson
Kategori: Ikke kategoriseret
Model: SMP-20WME

Har du brug for hjælp?

Hvis du har brug for hjælp til Vanson SMP-20WME stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vanson Manualer

Vanson

Vanson V-3213 Manual

23 August 2024
Vanson

Vanson SMP-60WME Manual

23 August 2024
Vanson

Vanson V-6833 Manual

23 August 2024
Vanson

Vanson BC-1HU Manual

23 August 2024
Vanson

Vanson SMP-20WM Manual

23 August 2024
Vanson

Vanson SPM 120 Manual

23 August 2024
Vanson

Vanson SMP-90WAT Manual

23 August 2024
Vanson

Vanson V-828 Manual

23 August 2024
Vanson

Vanson 36-4061 Manual

23 August 2024
Vanson

Vanson SDR-120W Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024