Vantec UGT-CR940 Manual


Læs nedenfor 📖 manual på dansk for Vantec UGT-CR940 (2 sider) i kategorien Hukommelseskortlæser. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
UGT-CR940
Copyright © 2023 Vantec Thermal
Technologies. All Rights Reserved.
All Registered Trademarks Belong
to Their Respective Compaines.
P d orinte n
R d P r.ec leyc ape
Info on e rmati in this docum nt is
subj ct ge wit notice t chano hout e.
R on t ieproducti of hese mater s ial n y an
man r at w h t ttne wh soever it ou wri en
perm ss n ddeni io i ictly rbis str fo .
For Choosing VantecUSA Product.
We are committed to providing you with the best
service and support. If you have a problem with
installing, getting the product to function or other
product related question, please feel free to write
to us. We will help you answer your question.
You can write to us at : support@vantecusa.com
For the latest Drivers, Manual and Frequently
Asked Questions (FAQ), they are available at our
website at vantecusa.com or write to us.
Thank You
Thank you,
VantecUSA Support Team.
QRCode to product Page,
Drivers, Manual, and FAQ.
v1.04
3. Prepare the System Chassis for installation by
removing the System Chassis side panel(s) cover.
Note: Your System Chassis may have a dierent
mounting method or special screw, please
follow the mounting method of your System
Chassis. The example shown is for standard
System Chassis.
1b. Slide the front panel device into your case until
the front panel is ush with the front of your case.
Secure this converted 5.25" Card Reader device to
your System Chassis with the provided screws.
2b. Proceed to connect the USB 3.0 Header from this
converted 5.25" Card Reader to your System
motherboard or expansion card USB 3.0 Header
(20pin) interface.
Secure back the System Chassis side panel(s) cover.
1c. Prepare the 3.5" to 5.25" converter kit.
Slide in the 3.5" Card Reader device into the
converter kit until the front panel is ush.
2c. Secure with the screws provided by the 3.5" to
5.25" front panel converter kit.
NOTE: The insertion orientation, Memory Stick and CF are inserted
with card label facing up. The SD/MMC, XD, MicroSD and M2 are
inserted with card label facing down.
1. Verify the package contents.
2. Locate an available 3.5" or 5.25" drive bay where
you would like to install the device. If you are
installing into a 3.5" Drive Bay, follow the steps
listed below 1a and 2a.
If you are installing into a 5.25" Drive Bay, you
will need to install this 3.5" Card Reader into a
converter kit like the HDA-525P, this will convert
the 3.5" to a 5.25" size. Follow the steps listed
below 1b and 2b.
2a. Proceed to connect the USB 3.0 Header from this
3.5" Card Reader to your System motherboard or
expansion card USB 3.0 Header (20pin) interface.
Secure back the System Chassis side panel(s) cover.
Memory Card Insertion Orientation.
1a. Slide the front panel device into your case until
the front panel is ush with the front of your
case. Secure this 3.5" Card Reader device to your
System Chassis with the provided screws.
T-Flash
USB 3.0
Connect to
System 20 pin
USB 3.0 Header
T-Flash
USB 3.0
T-Flash
USB 3.0
Connect to
System 20 pin
USB 3.0 Header
T-Flash
USB 3.0
Install Card Reader into 3.5" Drive Bay
Install Card Reader into 5.25" Drive Bay Convert Your 3.5" Card Reader to 5.25" using HDA-525P converter kit
T-Flash
USB 3.0
T-Flash
USB 3.0
T -F las h
USB 3.0
T -Fl as h
USB 3. 0
T-Flash
US B 3.0
T-Flash
USB 3.0
5.25” Drive Bay
3.5” Drive Bay
+ 3.5" Card Reader with integrated USB cable
+ installation screws
+ Quick Installation Guide
Note: Missing pin and notch on the
connector matches notch on the header
micro SDXCx-PictureSDXC/SDHC/MMC
MS/MS PRO DUO
Insert Top Up Insert Top Up Insert Top Up
Insert Bottom Up
CF I / CF II USB 3.0
Thumb Drive
M2
Note: Missing pin and notch on the
connector matches notch on the header


Produkt Specifikationer

Mærke: Vantec
Kategori: Hukommelseskortlæser
Model: UGT-CR940
Bredde: 101.7 mm
Dybde: 93.6 mm
Højde: 24.8 mm
Vægt: 178 g
Antal pr. pakke: 1 stk
Produktfarve: Sort
Kompatible hukommelseskort: MMC, MS Micro (M2), MicroSD (TransFlash), MiniSD, SDHC, SDXC, xD
Opbevaringstemperatur (T-T): -20 - 70 °C
Relativ luftfugtighed ved drift (H-H): -10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H): -10 - 90 %
Driftstemperatur (T-T): 0 - 55 °C
Husmateriale: Acrylonitrile butadiene styrene (ABS), Steel
Pakketype: Kasse
Kabellængde: 0.6 m
Understøttede Windows-operativsystemer: Windows 10, Windows 11, Windows 7, Windows 7 Professional x64, Windows 8, Windows 8.1
Intern: Ja
Oprindelsesland: Kina
Grænsefladetype: USB
Understøttede drevbåse: 3.5 "

Har du brug for hjælp?

Hvis du har brug for hjælp til Vantec UGT-CR940 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hukommelseskortlæser Vantec Manualer

Vantec

Vantec UGT-CR940 Manual

27 Februar 2025
Vantec

Vantec UGT-CR615 Manual

5 September 2024

Hukommelseskortlæser Manualer

Nyeste Hukommelseskortlæser Manualer

Vimar

Vimar 19457.TR.M Manual

15 December 2024
D-Link

D-Link DUB-2325 Manual

13 December 2024
Hama

Hama 123948 Manual

18 September 2024
Icy Dock

Icy Dock MB123SRCK-1B Manual

6 September 2024
CSL

CSL 300921 Manual

3 September 2024
CSL

CSL 300368 Manual

3 September 2024