Vemer memo Wi-Fi Manual
Læs nedenfor 📖 manual på dansk for Vemer memo Wi-Fi (3 sider) i kategorien Skifte. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
03-2023
REFERENCE STANDARDS
EU CONFORMITY DECLARATION
Vemer declares that the device complies with the Communitary Directive
2014/53/EU (RED) with reference to the following standards:
• EN 60730-2-7 • ETSI EN 301 489-1 • ETSI EN 301 489-17 • ETSI EN 300 328
The full text of the EU Conformity Declaration is available at www.vemer.it address.
information to users pursuant to art. 14 of the directive
2012/19 / EU of the european parliament and of the council
of 4 july 2012 on waste electrical and electronic equipment (WEEE)
If the crossed-out bin symbol appears on the equipment or packaging,
this means the product must not be included with other general waste
at the end of its working life.
The user must take the worn product to a sorted waste center,
or return it to the retailer when purchasing a new one.
Products for disposal can be consigned free of charge (without any new purchase obligation)
to retailers with a sales area of at least 400 m
2, if they measure less than 25 cm.
An efficient sort ed waste collection for the environmentally friendly disposal of the used device, or its
subsequent recycling, helps avoid the potent ial negative effects on the environment and people’s health,
and encourages the re-use and/or recycling of the construction materials.
Vemer S.p.A.
I - 32032 Feltre (BL) • Via Camp Lonc, 16
e-mail: info@vemer.it - web site: www.vemer.it
V3IS01143-010
Mod. memo Wi-Fi
Manuals
download
PDF
1 Terminals for power supply
2 Green LED: Wi-Fi network connection status
3 Yellow LED: Wi-Fi con guration/pairing
4 SET key: activation/deactivation of con guration
5 Relay terminals
6 OUT key: manual switching/relay block
7 Red LED: relay status indication
2INSTRUMENT DESCRIPTION and DIMENSION
1
2
3
4
6
5
7
1
User manual
TIME/ASTRONOMIC SWITCH WITH WIFI MODULE
Read all instructions carefully
Electronic digital switch for the management of electrical loads over time through the relay
(channel) available on board. Allows time programming (periodicity: daily or weekly) or
astronomical. The integrated Wi-Fi module allows you to control the device remotely using
your smartphone or tablet. It is necessary to connect the device to the home router and
install the appropriate app on your smartphone or tablet, free available for Android devices.
The switches memo Wi-Fi perform actions of 1B type and are intended to operate in
environments with III overvoltage category and pollution degree 2 in accordance with
EN 60730-1 standard.
Code Model Description
VE780700 memo Wi-Fi Daily/weekly/astronomical time switch with 1 relay
and Wi-Fi interface
SAFETY WARNINGS
During product installation and operation it is necessary to observe the following
instructions:
1) The product must be installed by a qualified person, strictly in observance of the
connection diagrams shown in this manual.
2) The product must be installed and activated in compliance with current electric
systems standards.
3) After installation inaccessibility to the terminals without using dedicated tools must
be guaranteed
4) Do not use the product for anything other than the indicated purpose.
5) The product must be installed in an adequately protected closed electrical panel.
6) In the supply network there must be a bipolar disconnection.
7) In the electrical system upstream of the product must be installed a protection
device against the overcurrents.
8) Before accessing the connection terminals, make sure that the leads are not live.
9) Do not connect or feed the product if any part of it is damaged.
10) The product can be used in environments with Measurement Category III and
Pollution degree 2, according to the Standard EN 60730-1
TECHNICAL FEATURES
• Power supply: 110 ÷ 240 Vac 50/60 Hz
• Power consumption: 4.7 VA (1,5 W)
• Power reserve in case of blackout: 72 ore
• Output: 1 monostable relay with changeover contacts and maximum switchable
load of 16 A / 250 V
• Terminal block for cables with maximum cables section of 2.5 mm
2
• Storable programs: 60 events
• Communication interface: Wi-Fi
• Operating frequency band: 2.4 GHz IEEE 802.11 b/g/n
• Maximum transmitted radiofrequency power: 18.3 dBm
• LED: 3 Operation status LED
• Keypad: 2 keys for configuration and forcing of relay output
• Operating temperature: -20°C ÷ 50°C
• Operating humidity: 20 ÷ 90% non condensing
• Storage temperature: -20°C ÷ 70°C
• Insulation: reinforced between accessible parts (front) and all the other terminals
• Container: 2 DIN modules
• Protection degree: IP20
3CONNECTION DIAGRAM
5INSTALLATION AND PRELIMINARY OPERATIONS
• Install and connect the device respecting the connection diagrams shown in this
manual.
• Make sure that:
1. the Wi-Fi Router and/or Access Point are correctly turned on and at a distance
such as to ensure a stable communication signal with the device.
2. the Router has full access to the Internet and there are no restrictions on navigation
(firewall settings, parental controls,...)
3. the frequency band is also enabled in the Router settings 2.4 GHz
(these devices do not support 5 GHz band)
4. the security settings of the Router are set in WPA / WPA2 or WPA2
(devices do not support WPA3 settings)
5. the smartphone used for the configuration is connected to the same Wi-Fi network
to connect the device to
• Create a Vemer account:
1. Install and start the memo Wi-Fi app on your smartphone (or tablet)
2. On the login page select “Registrati”
and enter “e-mail” and “password”
Note: for security reasons, it is recommended to choose
a dif ferent password from the one used to access
your e-mail account
3. Check your e-mail box, confirm the activation
of the account by clicking on the link contained
in the e-mail sent by the system
4. Log in by entering the e-mail and password
chosen during registration
6CONFIGURATION REMOTE CONTROL
To configure the device using a smartphone, proceed as follows:
1. Make sure your phone is connected to the
home Wi-Fi network where the device will be
connected.
2. Start the App and press the “+”
key at the top right of the Home page.
3. On the memo Wi-Fi, keep the SET key pressed
until the yellow LED (SET) starts flashing rapidly
in order to activate the configuration mode.
Now wait for the yellow LED (SET) to start
flashing slowly before proceeding.
4. On the App:
a. follow the instructions given in the wizard
and press Avanti
b. press the key to open your Ricerca reti
phone’s Wi-Fi settings
c. select the network from the list “MV_…”
to connect to the network generated by
the device (the yellow LED will turn on steadily to indicate successful
connection between the app and the device)
d. once connected, return to the application screen and then press the Continuakey
e. now enter the complete name (SSID) and the password of the Wi-Fi network
to which to connect the device, taking to be faithfully to type all the characters
(uppercase, lowercase, spaces, digits) that compose them.
Press to proceed.Continua
5. On the check that the green LED memo Wi-Fi starts flashing and after a while
becomes steady to indicate the correct connection with the home network.
6. On the App:
a. follow the instructions in the wizard making sure that the phone has reconnected
to the home Wi-Fi network
Note: if the connection does not take place automatically, open the phone’s
network settings and force the connection to the home Wi-Fi network
b. confirm by pressing the Connettikey
c. enter a name that helps to identify the memo Wi-Fi
and confirm with Salva.
The configuration procedure is finished, at this point:
the displays the list of devices associated with your account, among which theApp
newly associated device must also appear on the the green LED memo Wi-Fi
will be on steady.
7LED SIGNALS
The 3 LEDs on the device allow you to understand the operating status of the device, according to the types of switch on described in the table:
LED Type of switch on Operating status
GREEN
Steady on Normal operation
Fast ashing Wi-Fi network search (during the remote control con guration operation)
Slow ashing Trying to connect to the Wi-Fi network (during the remote control con guration operation)
Single ash Wrong password of the Wi-Fi network entered
Double ash No Wi-Fi connection or wrong Wi-Fi network name (SSID) entered
Triple ash Generic Wi-Fi network connection error
Quadruple ash No Internet connection
Short shutdown Time not synchronized
YELLOW (SET)
Steady on Connection with smartphone successful (during the remote control con guration operation)
Fast ashing AccessPoint mode preparation for remote control setup
Slow ashing AccessPoint mode active for remote control con guration
RED (OUT)
Steady on Relay status ON
O Relay status OFF
Short switch on Relay status LOCK OFF
Short switch o Relay status LOCK ON
GREEN + YELLOW (SET) Simultaneous short switch on No network con guration
GREEN + YELLOW (SET) + RED (OUT)
Simultaneous steady on Starting and/or resetting device
Sequence Device reboot
Simultaneous fast ashing Local operation disabled (displayed when a key is pressed)
Simultaneous slow ashing Internal memory error
4DEVICE RESET
Perform a reset to delete the settings and programs entered and return the device
to the factory default (excluding the network settings for remote control which
can be reset using the procedure described in Box 11).
To carry out the reset, hold down the SET and OUT keys simultaneously
(at least 5 seconds) until all the LEDs go off.
5"
8KEYBOARD OPERATION
The keys on the device allow you to carry out the operations described in the table, according to the type of pressure exerted:
KEY Pressure type Function
SET
Long pressure (> 3 sec) Activation of AccessPoint mode for remote control con guration
Short pressure Forcing communication with the server
Short pressure
(during the remote control con guration operation) Exit AccessPoint mode for con guring remote control
OUT Long pressure (> 3 sec) Lock (or unlock) the switching of the relay
Short pressure Manual relay ON/OFF switching
SET + OUT
Long pressure at the same time (> 5 sec) Reset settings: reset all settings to factory default (excluding network settings for remote control)
Long pressure at the same time (> 5 sec)
(during the remote control con guration operation)
Deleting account association and resetting network settings to factory default
(excluding settings, schedules, relay status)
PROGRAMS DESCRIPTION
9
Programs types
• ON/OFF program: is composed of a switching of the ON relay and of a subsequent
switching of the OFF relay. It can have a daily period (everyday with the same modes),
weekly (every week with the same modes).
• PULSE ON or PULSE OFF program: is an ON or OFF relay switching for a maximum
duration of 59 seconds. It can have a daily period (everyday with the same modes),
weekly (every week with the same modes).
• HOLIDAY program: is a period of time delimited by a start time and an end time within
which all programmed switchings (of that channel) are disabled.
The relay is in OFF position (OFF holiday) or in ON position (ON holiday).
From this example it’s possible to see that the
daily event on Monday not carried out because
in the same day it is provided the beginning of
the week program (even if the daily program of
Monday begins and ends before the beginning
of the weekly program). Instead, the daily
program of Sunday is carried out because it’s
the only one running for that day.
On/off programs priority
In case in which on/off programs are provided with different period (daily or weekly) to carry out
in the same day, only the program with the highest priority is executed.
Holiday program
The holiday program just begins and ends exactly at the specified times
From the example it can be seen that the day
events on Monday and Sunday are executed
because they precede and follow the holiday
schedule.
10 HOW TO DO IN CASE OF REPLACEMENT OF THE ROUTER
If the Router/Access Point of the home network needs to be replaced or if it is necessary to change the network settings entered in the device (network name SSID or password)
it is necessary to proceed with the device configuration described in BOX 6.
Important: Do not remove/delete the device icon from the user’s application associated to the memo WiFi before proceeding with the configuration procedure.
11 HOW TO DELETE THE DEVICE FROM YOUR ACCOUNT AND RESET NETWORK SETTINGS
If it is necessary to disassociate/delete a device from your user and/or reset the network settings of the device, proceed through one of the following two ways to do as an
alternative:
a. on the access at the “HOME” page, locate the device you want to disassociate/delete, select the option in the device menu and confirm. App Elimina
b. on the press and hold the SET key until the yellow LED (SET) starts flashing quickly to activate the configuration mode. Now wait for the yellow LED (SET) to start memo Wi-Fi
flashing slowly. Press and hold the SET and OUT buttons simultaneously (at least 5 seconds) until all the LEDs simultaneous steady on.
At the end of one of the two operations described above, the yellow and green LEDs on the device will simultaneous short switch on to confirm that the elimination has been completed.
Important: In this condition, the memo Wi-Fi relay status is OFF and only manual switching will be possible via the device keyboard.
Reconfigure the device (see Box 6) to restore normal operation.
Important: can’t coexist ON pulses and OFF pulses (if an ON pulse is already present,
it’s not possible to save a OFF pulse program and vice versa).
Important: can’t coexist holiday ON programs and holiday OFF programs
(if a holiday ON program is already present, it’s not possible to save
a holiday OFF program and vice versa).
Important: the device can be used indifferently as a time switch or as an astronomical
switch, but cannot be of both types at the same time. Therefore, it is not
possible to save astronomical programs if there are already time programs
(and vice versa).
Kind of program
• TIME: executes ON/OFF, impulse ON, impulse OFF, holiday programs at the set times.
• ASTRO: executes programs ON/OFF, impulse ON, impulse OFF, holiday at the set times
included in the time interval delimited by sunset and sunrise.
ON switchings set before sunset are performed at sunset, relay OFF switchings set after
sunrise are performed at sunrise.
Exceptions are the On Sunset and Off Sunrise programs (in the Time and Delay/Advance
cases) which can have switching on or off during the day.
NOTE: The sunset and sunrise times are automatically calculated by the device according
to the geographic coordinates set during installation. Instead of the sunrise and sunset
times, it is possible to use the times of the civil twilight that can be set via the App.
Daily program
Weekly program
Carried out program
Daily program
Holiday program
Carried out program
Programs priority
The priority programs defines how the device manages the case in which programs with
different period are running at the same time (1 indicates higher priority).
Program Date* Yearly Monthly Weekly Daily
Holiday 1
Night 2
Pulse 3
On/Off 4 5
* Date: select day, month, year (program carried “only once in the life of the product”).
If the month is not specified, the program is carried out all days xx of all months
of the specified year.
Produkt Specifikationer
| Mærke: | Vemer |
| Kategori: | Skifte |
| Model: | memo Wi-Fi |
Har du brug for hjælp?
Hvis du har brug for hjælp til Vemer memo Wi-Fi stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skifte Vemer Manualer
12 August 2024
8 August 2024
7 August 2024
7 August 2024
4 August 2024
2 August 2024
1 August 2024
28 Juli 2024
28 Juli 2024
28 Juli 2024
Skifte Manualer
- Skifte QNAP
- Skifte Bosch
- Skifte SilverCrest
- Skifte CyberPower
- Skifte Panasonic
- Skifte Hager
- Skifte Extech
- Skifte TP-Link
- Skifte Ei Electronics
- Skifte Philips
- Skifte IFM
- Skifte Victron Energy
- Skifte Finder
- Skifte Behringer
- Skifte Emos
- Skifte HP
- Skifte Sennheiser
- Skifte Worx
- Skifte D-Link
- Skifte Asus
- Skifte Pyle
- Skifte One For All
- Skifte Yamaha
- Skifte Nedis
- Skifte Abus
- Skifte Planet
- Skifte Hama
- Skifte Belkin
- Skifte Edimax
- Skifte Theben
- Skifte Black Box
- Skifte Wago
- Skifte Clas Ohlson
- Skifte DataVideo
- Skifte TRENDnet
- Skifte Smartwares
- Skifte Trotec
- Skifte Honeywell
- Skifte Quigg
- Skifte Buffalo
- Skifte Linksys
- Skifte Cisco
- Skifte Huawei
- Skifte König
- Skifte Elro
- Skifte Steinel
- Skifte B-Tech
- Skifte Powerfix
- Skifte Alpine
- Skifte Netgear
- Skifte Totolink
- Skifte Eberle
- Skifte Grässlin
- Skifte Triax
- Skifte Tripp Lite
- Skifte Mercury
- Skifte Alcatel
- Skifte Goobay
- Skifte Digitus
- Skifte Alecto
- Skifte Flamingo
- Skifte Plantronics
- Skifte Ansmann
- Skifte Techly
- Skifte Tork
- Skifte Schneider
- Skifte Marmitek
- Skifte Basetech
- Skifte PreSonus
- Skifte Tesla
- Skifte GEV
- Skifte APC
- Skifte Kathrein
- Skifte GlobalTronics
- Skifte Elation
- Skifte Omnitronic
- Skifte Velleman
- Skifte LevelOne
- Skifte Perel
- Skifte Mercusys
- Skifte JUNG
- Skifte ORNO
- Skifte ZyXEL
- Skifte Tiptel
- Skifte Tenda
- Skifte Eaton
- Skifte Shimano
- Skifte Hikvision
- Skifte Monacor
- Skifte Paladin
- Skifte Brennenstuhl
- Skifte Ubiquiti Networks
- Skifte Cotech
- Skifte Aeon Labs
- Skifte Chamberlain
- Skifte GAO
- Skifte EnGenius
- Skifte AV:link
- Skifte Grandstream
- Skifte EVE
- Skifte Renkforce
- Skifte Manhattan
- Skifte SPC
- Skifte Dormakaba
- Skifte Mikrotik
- Skifte Electro Harmonix
- Skifte Aztech
- Skifte LogiLink
- Skifte Eminent
- Skifte Kramer
- Skifte Vacmaster
- Skifte Generac
- Skifte Kopp
- Skifte Provision-ISR
- Skifte Audiovox
- Skifte Fibaro
- Skifte Merlin Gerin
- Skifte Iogear
- Skifte ATen
- Skifte Vimar
- Skifte Smart-AVI
- Skifte Dahua Technology
- Skifte Chacon
- Skifte Vivolink
- Skifte Boss
- Skifte Nexa
- Skifte StarTech.com
- Skifte Doepke
- Skifte Rex
- Skifte Adder
- Skifte Toolcraft
- Skifte Crestron
- Skifte Lindy
- Skifte Russound
- Skifte Emerson
- Skifte Elektrobock
- Skifte Lancom
- Skifte Kemo
- Skifte Delta Dore
- Skifte Audac
- Skifte CYP
- Skifte AMX
- Skifte Homematic IP
- Skifte H-Tronic
- Skifte Intellinet
- Skifte Whale
- Skifte Legrand
- Skifte Shelly
- Skifte SunBriteTV
- Skifte Steren
- Skifte Heitronic
- Skifte Intelix
- Skifte Kaiser
- Skifte Equip
- Skifte Alfatron
- Skifte PCE
- Skifte Ernitec
- Skifte Speaka
- Skifte Setti+
- Skifte BZBGear
- Skifte KanexPro
- Skifte Gefen
- Skifte RGBlink
- Skifte Profile
- Skifte Blustream
- Skifte Intermatic
- Skifte KlikaanKlikuit
- Skifte Sylvania
- Skifte Matrox
- Skifte Merten
- Skifte Sygonix
- Skifte UPM
- Skifte Gira
- Skifte PAC
- Skifte Wentronic
- Skifte Monoprice
- Skifte IPGARD
- Skifte OSD Audio
- Skifte Unify
- Skifte Berker
- Skifte Suevia
- Skifte SIIG
- Skifte Advantech
- Skifte Micro Connect
- Skifte Extron
- Skifte Avocent
- Skifte PureLink
- Skifte Comet
- Skifte Ebode
- Skifte Robbe
- Skifte ICasa
- Skifte Cambium Networks
- Skifte Kraus & Naimer
- Skifte Noble
- Skifte Intertechno
- Skifte Extreme Networks
- Skifte Ecler
- Skifte Inverto
- Skifte Rule
- Skifte Phoenix Contact
- Skifte Seuthe
- Skifte Maclean Energy
- Skifte SmartAVI
- Skifte Cudy
- Skifte Mach Power
- Skifte SEC24
- Skifte Cooking Performance Group
- Skifte STI
- Skifte Atlona
- Skifte Adviti
- Skifte Flic
- Skifte IB Connect
- Skifte Liberty
- Skifte Hamlet
- Skifte Noark
- Skifte 2USB
- Skifte Roline
- Skifte KVM-TEC
- Skifte Epiphan
- Skifte Axing
- Skifte Juniper
- Skifte Raritan
- Skifte ConnectPro
- Skifte Atlantis Land
- Skifte Pizzato Elettrica
- Skifte Baco
- Skifte SEADA
- Skifte CSL
Nyeste Skifte Manualer
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024