Videotel Digital RF Push Manual


Læs nedenfor 📖 manual på dansk for Videotel Digital RF Push (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
(1)
(5)
RFPUSH Operation Manual
What is in the box
1 -IPM+
1 - RF Remote Control
1 - 1 Foot Black Control Cable
d i g i t a l
d i g i t a l
681 Anita Street Suite 104 - Chula Vista, CA 91911
(800) 878-4056 - (619) 670-4412
www.videoteldigital.com - sales@videoteldigital.com
Connections
The IPM+ can connect to the I/O port of any of our interactive players (VP71, VP71XD, VP71XD 4K , VP90, HD2700D and HD2700M). The (1)
included remote has been pre programmed and linked to the IPM+.
(4)
(3)
Each button represents a “track” number. Press-
ing button 1 will play the video or photo that
(2)
begins with 001 . Button 3 will play video 003. (3)
When loading les on your SD or USB make (4)
sure you have a looping “Standby” video that
starts with 000. This can be a black video, logo or
some type of attract screen.
Simply connect the IPM+ to the I/O port of your interactive player using the included cable. Next, connect the player to your TV, insert
(5)
your SD / USB and power on the player. Note: The IPM+ has a 5VDC jack but is only required when connecting a harness with LEDs requiring
more then 1 AMP of current.
The player can be set to interactive “Instant” and “Delayed... Instant is recommended for the IPM+.
• Instant mode will trigger a dierent video even if the rst video has not nished playing. For example: If button 2 is pressed, video 002.
mov will begin playing. If button 3 is pressed, then video 002.mov will stop and video 003.mov will instantly play.
Delayed mode will ignore any additional button triggers until the 1st video is nished playing. For example: If button 2 is pressed, video
002.mov will begin playing, play once and then loop the 000.mov video again. If button 3 is pressed during video 002.mov, the request
will be ignored
To reprogram the IPM+, simply press and hold the “RF LINK Program
button (6) on the side of the IPM+. Once the 001 LED ashes you can
release the button. The 1st button you press on the remote will be as-
signed to video 001. The 001 LED will then stop ashing and 002 will
ash. Once you have programmed all of the buttons you plan to use
(do not program the buttons not assigned to a video) then press and
hold the “RF LINK Program button again until the LED stops ashing.
You can use multiple remotes on the same IPM+. Lets say you want 2 re-
motes to both trigger videos 001 to 004. You would duplicate your 001,
002, 003 and 004 on your computer and rename them 005, 006, 007
and 008. Then load all 9 videos (000-008) on the SD/USB. Use the above
programming instructions but after you program the 1st 4 buttons of
the 1st remote, program the rst 4 buttons of the second remote. Even
though remote #2 will trigger video 005 when button 1 is pressed... you
will still get the same video, since 001 and 005 are the same videos.
(2)
(6)


Produkt Specifikationer

Mærke: Videotel Digital
Kategori: Ikke kategoriseret
Model: RF Push

Har du brug for hjælp?

Hvis du har brug for hjælp til Videotel Digital RF Push stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Videotel Digital Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer