Vtech BM2150 Manual

Vtech Babyalarm BM2150

Læs nedenfor 📖 manual på dansk for Vtech BM2150 (2 sider) i kategorien Babyalarm. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Congratulations
on purchasing your new VTech product. Before
using this product, please read Important
safety instructions.
This manual has all the feature operations
and troubleshooting necessary to install and
operate your new VTech product. Please
review this manual thoroughly to ensure proper
installation and operation of this innovative and
feature rich VTech product.
What’s in the box
Important safety instructions
When using your equipment, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and injury, including
the following:
1. Follow all warnings and instructions marked on
the product.
2. Adult setup is required.
3. This product is intended as an aid. It is not
a substitute for responsible and proper adult
supervision and should not be used as such.
4. This product is not intended for use as a medical
monitor.
5. Do not use this product near water. For example,
do not use it next to a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in
a wet basement or shower.
6. CAUTION: Use only the batteries provided.
There may be a risk of explosion if a wrong type
of battery is used for the parent unit. Do not
dispose of batteries in a fire. They may explode.
7. Use only the adapters included with this product.
Incorrect adapter polarity or voltage can
seriously damage the product.
Baby unit power adapter: Output: 6V DC 450mA
Parent unit power adapter: Output: 6V DC 450mA.
8. The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if it is plugged into a ceiling, under-the-table or
cabinet outlet.
9. For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be
easily accessible.
10. Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
11. Unplug the power cords before replacing
batteries.
12. Do not cut off the power adapters to replace
them with other plugs, as this causes a
hazardous situation.
13. Do not allow anything to rest on the power cords.
Do not install this product where the cords may
be walked on or crimped.
14. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home, consult your dealer or local
power company.
15. Do not overload wall outlets or use an extension
cord.
16. Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
17. This product should not be placed in any area
where proper ventilation is not provided. Slots and
openings in the back or bottom of this product
are provided for ventilation. To protect them from
overheating, these openings must not be blocked
by placing the product on a soft surface such as
a bed, sofa or rug. This product should never be
placed near or over a radiator or heat register.
18. Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short circuit.
Never spill liquid of any kind on the product.
19. To reduce the risk of electric shock, do
not disassemble this product, but take it to
an authorized service facility. Opening or
removing parts of the product other than
specified access doors may expose you to
dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when
the product is subsequently used.
20. You should test the sound reception every
time you turn on the units or move one of the
components.
21. Periodically examine all components for damage.
22. Be aware of possible loss of privacy while using
public airwaves. Conversations may be picked
up by other nursery monitors, cordless phones,
scanners, etc.
23. Children should be supervised to ensure that
they do not play with the product.
24. The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature
between 0oC and 40oC.
2. Do not expose the product to extreme cold, heat
or direct sunlight. Do not put the product close to
a heating source.
3. Batteries should not be exposed to excessive
heat such as bright sunshine or fire.
4. Warning—Strangulation Hazard—
Children have STRANGLED in cords. Keep
this cord out of the reach of children (more
than 1 metre away).
5. Never place the baby unit inside the baby’s cot or
playpen. Never cover the baby unit or parent unit
with anything such as a towel or a blanket.
6. Other electronic products may cause
interference with your baby monitor. Try
installing your baby monitor as far away
from these electronic devices as possible:
wireless routers, radios, cellular telephones,
intercoms, room monitors, televisions,
personal computers, kitchen appliances and
cordless telephones.
Install parent unit battery
1. Slide open the battery compartment cover.
2. Install the supplied rechargeable batteries
into the battery compartment, matching the
polarity markings ( and + -).
3. Slide the battery compartment cover back
until it securely clicks into place.
Connect and charge the
battery
The rechargeable battery is pre-installed in your
parent unit.
Use only the power adapters supplied with this
product.
Make sure the electrical outlets are not controlled
by wall switches.
The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if they are plugged into a ceiling, under-the-table
or cabinet outlet.
Make sure the parent unit, the baby unit and the
power adapter cords are out of reach of children.
Connect the baby monitor
Charge the parent unit battery
When you have connected and turned on
the parent unit, the battery will be charged
automatically. The battery icon indicates the
battery status (see the following table).
The parent unit battery is fully charged after
12 hours of continuous charging.
It takes longer to charge the battery when the
parent unit is turned on. To shorten the charging
time, turn the parent unit off while charging.
The standby time varies depending on the
volume level you set and your actual use.
Battery
indicators
Battery
status
Action
The battery
icon
and LOW
BATTERY
flashes.
The battery
has very little
charge and
may be used
for only a
short time.
Charge
without
interruption
(about 30
minutes).
The battery
icon
becomes
solid .
The battery is
fully charged.
To keep
the battery
charged,
connect it to
AC power
when not in
use.
Before use
This baby monitor is intended as an aid. It is not a
substitute for proper adult supervision, and should
not be used as such.
Test your baby monitor
You may test the baby monitor before initial
use, and at regular times thereafter.
For hearing protection, make sure the
parent unit is more than 1 metre away
from . If you hear any both baby unit
high-pitched noise, move the parent unit
further until the noise stops. You can
also press on the parent unit to lower or
mute the noise.
> 1 metre
1. Make sure your baby unit and parent unit
are on.
2. The parent unit displays images from the
baby unit.
Speak towards the microphone of the
baby unit. You will hear the sound at the
parent unit.
the parent unit beeps, move the parent unit When
closer to the baby units (observe the minimum
distance of 1 metre). You can also check if the
baby unit is connected to a live power socket and
switched on.
Increase the speaker volume of the parent unit if
you cannot hear the sounds transmitted from the
baby units.
Positioning the baby monitor
Keep the baby unit out of the reach of baby. your
Never place or mount the baby unit inside the
baby’s or playpen.cot
To avoid interference from other electronic
devices, place your baby monitor far away from
devices such as wireless routers, microwaves,
cell phones and computers.
1. Place the baby unit more than 1 metre away
from your baby.
> 1 metre
2. Place the parent unit more than 1 metre
away from the baby unit.
If you experience high-pitched screeching noise
from your baby monitor while positioning:
-Make sure your baby unit and parent unit are
more than 1 metre apart, OR
-Turn down the volume of your parent unit.
Operating range
The operating range of the baby monitor
is up to 300 metres outdoors or 50 metres
indoors. The actual operating range may vary
depending on the environmental conditions
and other interferences such as walls, doors
and other obstructions.
Overview
Baby unit overview
2
1
7
3
5
6
4
8
9
1 _ Temperature sensor
The baby unit measures the temperature in
baby’s room and transmits this information to
the parent unit. If the detected temperature
falls outside the temperature range, the
parent unit screen will display LOW TEMP (if
<10oC) or (if >HI TEMP 30oC).
2 _ Speaker
3 _ Power indicator
On when the baby unit is switched on.
Off when the baby unit is switched off.
4 _
Press to increase the speaker volume.
5 _ Play / Stop lullabies
6 _ (On / off)
Press and hold to turn the baby unit on
or off.
7 _
Press to decrease the speaker volume.
8 _ Microphone
9 _ Night Light
Press to turn night light on / off.
Parent unit overview
4
6
7
8
5
1
2
39
10
1 _ LCD display
2 _ Sensitivity/Sound level indicators
More lights on when a higher sensitivity
is set, or when a higher sound level is
detected from the baby unit.
3 _ Charging Indicator
4 _
Press to increase the speaker volume.
5 _ MENU (Select)
6 _ (On / off)
Press and hold to turn on or off.
7 _
Press to decrease the speaker volume.
8 _ Microphone
9 _ Power Indicator
10 _ (Back)
11
12
13
11 _ Speakerphone
12 _ TALK
Press and hold to talk to the baby unit.
13 _ Battery Compartment Cover
User’s manual
BM2150
Digital Audio Baby Monitor
For product support please call:
1300 369 193


Produkt Specifikationer

Mærke: Vtech
Kategori: Babyalarm
Model: BM2150

Har du brug for hjælp?

Hvis du har brug for hjælp til Vtech BM2150 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Babyalarm Vtech Manualer

Vtech

Vtech RM7754HD Manual

15 December 2024
Vtech

Vtech RM5754HD Manual

13 December 2024
Vtech

Vtech RM2751 Manual

13 December 2024
Vtech

Vtech VC2105 Manual

13 December 2024
Vtech

Vtech RM5764-2HD Manual

13 December 2024
Vtech

Vtech RM5754-2HD Manual

13 December 2024
Vtech

Vtech RM9751 Manual

13 December 2024
Vtech

Vtech BM5750HD Manual

7 Oktober 2024

Babyalarm Manualer

Nyeste Babyalarm Manualer

Alecto

Alecto DVM-240 BEELD Manual

21 December 2024
Lionelo

Lionelo Babyline 8.3 Manual

18 December 2024
Alecto

Alecto DVM-200 Manual

17 December 2024
Oricom

Oricom SC330 Manual

10 December 2024
Alecto

Alecto DVM200XL Manual

4 December 2024
Motorola

Motorola VM44 Connect Manual

30 November 2024
D-Link

D-Link DCS-825L Manual

22 November 2024
Chipolino

Chipolino Polaris Manual

17 November 2024
Alecto

Alecto DVM200MGS Manual

16 November 2024