Vtech CareLine SN6307 Manual

Vtech Telefon CareLine SN6307

Læs nedenfor 📖 manual på dansk for Vtech CareLine SN6307 (2 sider) i kategorien Telefon. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

SN6307

Photo Speed Dial Handset

for use with

VTech CareLine™

User’s manual

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

the latest VTech product news

Telephones identiﬁed with this

logo have reduced noise and

interference when used with

most T-coil equipped hearing

aids and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of the

Telecommunications Industry

Association. Used under license.

Compatible with

Hearing Aid T-Coil

TIA-1083

Congratulations

on purchasing your new VTech product.

Before using this product, please read

Important safety instructions.

This user’s manual provides you with

installation and use instructions. Please

read this manual thoroughly to ensure

proper installation and operation of this

VTech product.

For support, shopping, and everything new

at VTech, visit our website at

www.vtechphones.com.

User’s manual

Parts checklist

Your product package contains the

following items. Save your sales receipt

and original packaging in the event

warranty service is necessary.

THIS SIDE UP

Install the battery

Install the battery as shown below.

NOTES

• Use only supplied battery.

• If the handset will not be used for a long time,

disconnect and remove the battery to prevent

possible leakage.

Connect and charge the battery

NOTES

• Use only the adapter provided.

• Charge the battery provided with this product

only in accordance with the instructions and

limitations speciﬁed in this manual.

• The adapter is intended to be correctly

oriented in a vertical or ﬂoor mount position.

The prongs are not designed to hold the plug

in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

Connect the charger

Charge the battery

Once you have installed the battery and

placed the handset in the charger, the

CHARGE light indicates the battery status

(see the table below).

NOTES

• For best performance, keep the handset in

the charger when not in use.

• The battery is fully charged after 12 hours of

continuous charging.

CHARGE

light Battery status Action

Flashes

red every

10 seconds

The battery has

very little charge

and the handset

is not in charger.

The handset

cannot dial out.

Charge without

interruption

(at least

30 minutes).

Red The battery has

enough charge

to be used for a

short time.

Charge without

interruption

(at least

30 minutes).

Green The battery is

fully charged.

To keep the

battery charged,

place it in the

charger when

not in use.

Handset overview

1 – Incoming call light

2 – Earpiece

3 – CHARGE light

4 – Photo speed dial keys

• Press to dial a preset number.

5 –

• Make or answer a call.

• Press to put the current call on hold.

• During a call, press to answer an

incoming call when you receive a

call waiting alert.

6 –

• Hang up a call.

• Silence the ringer temporarily while

the phone is ringing.

• Mute the paging tone.

7 –

• Make or answer a call using the

speakerphone.

• Switch between the speakerphone

and the earpiece.

8 – Microphone

9 – Charging pole

10 – Speakerphone

11 – Battery compartment cover

12 – VOL+

• Increase the ringer volume and the

listening volume.

13 – VOL-

• Decrease the ringer volume and the

listening volume.

• Silence the ringer temporarily while

the phone is ringing.

• Mute the paging tone.

Charger overview

1 – Charging pole

Lights overview

The following table summarizes the lights

patterns on the handset under various

conditions.

Light Pattern

CHARGE

light

• Red when the handset battery

is charging.

• Flashes red every 10 seconds

when the handset battery is

low and not charging.

• Green when the handset

battery is fully charged.

• Alternates red and green

quickly when handset

registration is in progress.

• Alternates red and green

slowly when the handset is not

registered and not in charger.

Incoming

call light

• Flashes orange slowly when

the handset received an

incoming call.

• Green when the handset is on

earpiece mode.

• Flashes green slowly when

the handset received an

incoming call.

• Flashes green twice every

3 seconds when line in use

while the handset is idle.

• Orange when the handset is

on speakerphone mode.

Voice prompts

The following table summarizes voice

prompts you hear under certain conditions.

Voice Prompt Condition

“ ” Any key is pressed when the Not registered

handset is not registered.

“ ” Any key is pressed when Out of range

the handset is out of range.

“Low battery”A photo speed dial key,

, or is pressed

when the handset battery

is low.

Before use

There are two types of Careline series

telephone. The instructions to register

and conﬁgure your SN6307 handset are

different for those two types of Careline

systems series telephone.

Use the diagrams on the right to identify

your Careline telephone, and then refer to

the respective section for instructions.

Operating range

This cordless handset operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance

- which can vary with the locations of the

telephone base and handset, the weather,

and the layout of your home or ofﬁce.

When the handset is out of range, the

handset plays the voice prompt “Out of

range” if any key is pressed. If there is a

call while the handset is out of range, it

may not ring, or if it does ring, the call may

not connect well when you press . Move

closer to the telephone base, then press

to answer the call.

During a call, if the handset is moved out

of range, the call will end automatically,

and you will hear a notiﬁcation tone.

Identify your Careline telephone

For SN6127/SN6187 telephone:

Add and register a handset

your Careline series telephone base before

use. Your telephone system supports a

maximum of 12 devices.

NOTE

Charge the new handset without interruption

for at least 30 minutes before registering it to

the telephone base.

1. Press and hold at /FIND HANDSET

the telephone base until the IN USE

light turns red.

2. Put the handset in the charger. The

handset light alternates CHARGE

red and green quickly to indicate the

registration is in progress.

You hear a conﬁrmation tone when the

registration process completes. It takes up

to 60 seconds to complete the registration.

If registration fails, you hear an error tone,

and the light red and CHARGE alternates

green slowly when it is taken out of the

cradle. Start again from Step 1 above.

NOTES

• You cannot register a handset if any other

system device is in use.

• When you already have 12 registered

devices and you try to register another

handset to the telephone base, you hear four

beeps from the telephone base.

Set photo speed dial entries

Your handset has four photo speed

dial keys. It retrieves the photo speed

dial entries from the phonebook in the

telephone base.

Make sure you store the photo speed dial

entries in the phonebook naming

Photo 1,

Photo 2, Photo 3 and Photo 4

respectively.

NOTES

• Names for the photo speed dial entries are

case-sensitive.

• A space must be entered between “Photo” and

the number when entering the name of a photo

speed dial entry.

• Deleting an entry in phonebook will remove

the associated photo speed dial entry.

1. On a SN6127/SN6187 handset, press

MENU when idle.

2. Press or to scroll to , Phonebook

and then press SELECT.

3. Press or to scroll to , Add contact

and then press SELECT.

4. When the handset displays ENTER

NUMBER, use the dialing keys to enter

a number (up to 30 digits).

• Press or to move the cursor to

the left or right.

• Press to erase a digit.DELETE

• Press and hold to erase all DELETE

digits.

• Press and hold PAUSE to enter a

dialing pause (a appears).P

-OR-

Copy a number from the redial list by

pressing then press REDIAL , or

REDIAL repeatedly to ﬁnd the desired

number. Press to copy the SELECT

number.

5. Press to save.SELECT

6. When the handset displays ENTER

NAME, use the dialing keys to enter

Photo 1, , or .Photo 2 Photo 3 Photo 4

Press once or several times on the

dialing keys to enter the selected

character.

By default, the ﬁrst character of each

word is uppercase, and the rest is

lowercase.

• Press or to move the cursor to

the left or right.

• Press to add a space.0

• Press to switch between the

uppercase and lowercase characters.

• Press to erase a character.DELETE

• Press and hold to erase all DELETE

characters.

7. Press to save. The handset SELECT

displays and you hear a Saved

conﬁrmation tone.

For SN1157/SN1197/SN6147/SN6196/SN6197 telephone:

Add and register a handset

your Careline series telephone base before

use. Your telephone system supports a

maximum of 12 devices.

NOTE

Charge the new handset without interruption for

at least 30 minutes before registering it to the

telephone base.

1. Press on the telephone base MENU

when it is not in use.

9:48am 5/20

BASE

CALL LOG

PHONEBOOK

2. Press or to scroll to , and Settings

then press SELECT.

9:48am 5/20

Set date/time

Annc Caller ID

Settings

BACK

SELECT

3. Press or to scroll to , Registration

then press SELECT. The telephone

base shows

Registering... Please wait

9:48am 5/20

SETTINGS

Dial mode

Registration

BACK

SELECT

4. Put the handset in the charger. The

handset CHARGE light alternates

red and green quickly to indicate the

registration is in progress.

You hear a conﬁrmation tone when the

registration process completes. It takes up

to 60 seconds to complete the registration.

If registration fails, you hear an error tone,

and the light red and CHARGE alternates

green slowly when it is taken out of the

cradle. Start again from Step 1 above.

NOTES

• You cannot register a handset if any other

system devices is in use.

• The telephone base shows Registration

slots are full when you try to register more

than 12 devices to it.

• To cancel the registration, press or CANCEL

BACK.

Set photo speed dial entries

Your handset has four photo speed dial

keys. It retrieves the same set of photo

speed dial entries stored in the telephone

base.

If you have assigned the photo speed dial

entries at the telephone base before, your

handset is ready to use. Skip this part and

read .Insert photos for speed dial keys

NOTES

• You can store the same phone number in

more than one photo speed dial slots.

• If you have a pendant ( ) registered to SN6167

your telephone base, the speed dial entries

of the pendant are the same as the ﬁrst two

photo speed dial entries of the telephone

base and the handset.

• Editing or deleting an entry in phonebook

does not affect the photo speed dial entries.

1. Press on the telephone base MENU

when it is not in use.

9:48am 5/20

BASE

CALL LOG

PHONEBOOK

-OR-

Press an unassigned photo speed dial

key on the telephone base, and then go

to Step 4.

2. Press or to scroll to Photo speed

dial, and then press SELECT.

9:48am 5/20

Answering system

Photo speed dial

Phonebook

BACK

SELECT

3. Press or to choose an unassigned

photo speed dial slot, and then press

SELECT.

9:48am 5/20

1:<Unassigned>

2:<Unassigned>

3:<Unassigned>

BACK

SELECT

4. When the base displays MEMORY X

NUMBER, use the dialing keys to enter

a number (up to 30 digits).

• Press or to move the cursor to

the left or right.

• Press or X/DELETE BACKSPACE to

erase a digit.

• Press and hold to erase X/DELETE

all digits.

• Press and hold PAUSE to enter a

dialing pause (a appears).P

5. Press NEXT.

9:48am 5/20

MEMORY 1 NUMBER

BACKSPACE

6. When the base displays MEMORY X

NAME, use the dialing keys to enter a

name (up to 15 characters).

Press once or several times on the

dialing keys to enter the selected

character.

By default, the ﬁrst character of each

word is uppercase, and the rest is

lowercase.

• Press or to move the cursor to

the left or right.

• Press to add a space.0

• Press to switch between the

uppercase and lowercase characters.

• Press or X/DELETE BACKSPACE to

erase a character.

• Press and hold to erase X/DELETE

all characters.

7. Press SAVE. The screen displays

Memory X saved and you hear a

conﬁrmation tone.

9:48am 5/20

MEMORY 1 NAME

BACKSPACE

SAVE

Read the instructions for

SN1157/SN1197/SN6147/SN6196/SN6197 telephone.

Read the instructions for SN6127/SN6187 telephone.

Insert photos for speed dial

keys

You can add desired photos into the

photo speed dial compartments, or write

the contact name on the photo speed

dial cards.

To add a photo, use the photo speed dial

card as a tool to crop your desired photo,

and then insert it as shown below.

NOTE

The handset is shipped with protective stickers

covering the photo speed dial compartments.

Remove the protective sticker before use.

26.8 mm

14.5 mm

Settings

Adjust ringer volume

You can adjust the ringer volume level, or

turn the ringer off.

• When the handset is not in use, press

VOL- VOL+ or .

NOTE

When the ringer volume is set to off, the

handset still rings when you press

/FIND HANDSET or at the FIND HS

telephone base.

Quiet mode

Your handset follows the quiet mode setting

in the telephone base. When the quiet mode

is on, all tones (except paging tone) are

muted.

Refer to the Quiet mode section in the

user’s manual of your Careline series

telephone base for the setting.

Caller ID announce

The voice announce caller ID feature lets

you know who the caller is. When you have

an incoming call, the handset speaks “Call

from...” and the name of the caller based

on the phonebook or caller ID information.

If the caller’s name is private or unknown,

the phone number up to the last 11 digits

will be announced. If the caller’s phone

number is also private or unknown, no

information will be announced.

To turn on or off this feature, refer to the

Caller ID announce section in the user’s

manual of the telephone base.

NOTES

• To use the caller ID announce feature, you

must subscribe to caller ID service from your

telephone service provider.

• When there are up to ﬁve handsets/pendants

registered, the telephone system supports

caller ID announce for all handsets/pendants.

If six or more handsets/pendants are

registered, the system supports caller

ID announce for the ﬁrst four registered

handsets/pendants only.

Produkt Specifikationer

Mærke:	Vtech
Kategori:	Telefon
Model:	CareLine SN6307

Har du brug for hjælp?

Hvis du har brug for hjælp til Vtech CareLine SN6307 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Vtech Manualer

Vtech DS6611-2 Manual

14 December 2024

Vtech DS6771-3 Manual

14 December 2024

Vtech DS6161 Manual

14 December 2024

Vtech DS6621-2 Manual

14 December 2024

Vtech CS6114-21 Manual

14 December 2024

Vtech CS6124-21 Manual

13 December 2024

Vtech CS6929-3 Manual

13 December 2024

Vtech CS6124-11 Manual

13 December 2024

Vtech CS6929-2 Manual

13 December 2024

Vtech IS8101 Manual

13 December 2024

Telefon Manualer

Nyeste Telefon Manualer

HTC Desire 19+ Manual

15 December 2024

Ranex RX 6031 Manual

15 December 2024

Panasonic KX-TGU410 Manual

14 December 2024

Geemarc CL8510 Manual

11 December 2024

ClearOne Chat 150 Manual

10 December 2024

6 December 2024

6 December 2024

6 December 2024

23 November 2024

Panasonic KX-TGU120AZ Manual

21 November 2024