Vtech CS6114 Manual

Vtech Telefon CS6114

Læs nedenfor 📖 manual på dansk for Vtech CS6114 (4 sider) i kategorien Telefon. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

What’s in the box

Your telephone package contains the following

items. Save your sales receipt and original

packaging in the event warranty service is

necessary.

Handset overview

1 – Handset earpiece

2 – LCD display

3 – CID/VOL-

• Review the caller ID log when the telephone is not

in use.

• Scroll down while in a menu, or in the directory,

caller ID log or redial list.

• Move the cursor to the left when entering numbers

or names.

• Decrease the listening volume during a call.

4 – /FLASH

• Make or answer a call.

• Answer an incoming call when you receive a call

waiting alert.

5 – 1

• Press repeatedly to add or remove 1 in front of the

caller ID log entry before dialing or saving it to the

directory.

6 – TONE

• Switch to tone dialing temporarily during a call.

7 – MUTE/DELETE

• Mute the microphone during a call.

• Silence the handset ringer temporarily while the

phone is ringing.

• Delete the displayed entry while reviewing the

directory, caller ID log or redial list.

• Delete digits or characters when entering numbers

or names.

8 – Microphone

9 – Charging pole

10 – MENU/SELECT

• Show the menu.

• While in a menu, press to select an item, or save

an entry or setting.

11 – /VOL+

• Review the directory when the phone is not in

use.

• Scroll up while in a menu, or in the directory,

caller ID log or redial list.

• Move the cursor to the right when entering

numbers or names.

• Increase the listening volume during a call.

12 – OFF/CANCEL

• Hang up a call.

• Return to the previous menu or idle mode without

making changes.

• Delete digits while predialing.

• Silence the handset ringer temporarily while the

phone is ringing.

• Erase the missed call indicator while the handset

is not in use.

13 – 0/OPER

• Enter space character during text editing.

14 – #

• Show other dialing options when reviewing a

caller ID log entry.

15 – REDIAL/PAUSE

• Review the redial list.

• Insert a dialing pause while dialing or entering

numbers into the directory.

16 – Battery compartment cover

Telephone base overview

1 – /FIND HANDSET

• Page all system handsets.

2 – Charging pole

Charger overview

1 – Charging pole

Display icons overview

The battery icon flashes when the

battery is low and needs charging.

The battery icon animates when the

battery is charging.

The battery icon becomes solid when

the battery is fully charged.

There are new voicemail received

from your telephone service provider.

NEW There are new caller ID log entries.

Connect

You can choose to connect the telephone base

for desktop usage or wall mounting.

NOTES

• Use only the adapters provided.

• Make sure the electrical outlets are not controlled by

wall switches.

• The adapters are intended to be correctly oriented in

a vertical or ﬂoor mount position. The prongs are not

designed to hold the plug in place if it is plugged into

a ceiling, under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line (DSL) high-

speed Internet service through your telephone line,

make sure you install a DSL ﬁlter (not included)

between the telephone line cord and telephone wall

jack. Contact your DSL service provider for more

information.

Connect the telephone base

Connect the charger

Mount the telephone base

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTES

• Use only supplied battery.

• Charge the battery provided with this product only

in accordance with the instructions and limitations

speciﬁed in this manual.

• If the handset will not be used for a long time,

disconnect and remove the battery to prevent

possible leakage.

Charge the battery

Place the handset in the telephone base or the

charger to charge.

Once you have installed the battery, the handset

LCD display indicates the battery status (see the

table below).

NOTES

• For best performance, keep the handset in the

telephone base or charger when not in use.

• The battery is fully charged after 16 hours of

continuous charging.

• If you place the handset in the telephone base or

the charger without plugging in the battery, the

screen displays No battery.

Battery

indicators Battery status Action

The screen

is blank, or

displays Put in

charger and

ﬂashes.

The battery has

no or very little

charge. The

handset cannot

be used.

Charge without

interruption

(at least 30

minutes).

The screen

displays

Low battery

and ﬂashes.

The battery has

enough charge

to be used for a

short time.

Charge without

interruption

(about 30

minutes).

The screen

displays

HANDSET X.

The battery is

charged.

To keep

the battery

charged,

place it in the

telephone base

or charger when

not in use.

Before use

After you install your telephone or power returns

following a power outage, the handset will prompt

you to set the date and time.

Set date and time

1. Use the dialing keys ( ) to enter the month 0-9

( ), date ( ) and year ( ). Then press MM DD YY

SELECT.

2. Use the dialing keys ( ) to enter the hour 0-9

( ) and minute ( ). Then press HH MM

choose AM or .PM

3. Press SELECT to save.

Check for dial tone

Press . If you hear a dial tone, the installation is

successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you have

changed your telephone service to digital

service from a cable company or a VoIP

service provider, the telephone line may need

to be rewired to allow all existing telephone

jacks to work. Contact your cable/VoIP service

provider for more information.

Operating range

This cordless telephone operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance - which

can vary with the locations of the telephone base

and handset, the weather, and the layout of your

home or ofﬁce.

When the handset is out of range, the handset

displays Out of range or no pwr at base.

If there is a call while the handset is out of range,

it may not ring, or if it does ring, the call may not

connect well when you press . Move closer to

the telephone base, then press to answer the

call.

If the handset moves out of range during

a telephone conversation, there may be

interference. To improve reception, move closer

to the telephone base.

Use the handset menu

1. Press MENU when the phone is not in use.

2. or until the screen displays the Press

desired feature menu.

3. Press SELECT.

• To return to the previous menu, press

CANCEL.

• To return to idle mode, press and hold

CANCEL.

Conﬁgure your telephone

Set language

The LCD language is preset to English. You can

select English, French or Spanish to be used in all

screen displays.

1. Press MENU when the handset is not in use.

2. Scroll to , then press Settings SELECT twice.

3. Scroll to choose , or English Français

Español.

4. Press SELECT twice to save your setting.

Set date and time

1. Press MENU on the handset when not in use.

2. Scroll to and then press Set date/time

SELECT.

3. Use the dialing keys ( ) to enter the month 0-9

( ), date ( ) and year ( ). Then press MM DD YY

SELECT.

4. Use the dialing keys ( ) to enter the hour 0-9

( ) and minute ( ). Then press HH MM

choose AM or .PM

5. Press SELECT.

Temporary tone dialing

If you have pulse (rotary) service only, you

can switch from pulse to touch-tone dialing

temporarily during a call.

1. During a call, press .TONE

2. Use the dialing keys to enter the relevant

number. The telephone sends touch-tone

signals. It automatically returns to pulse dialing

mode after you end the call.

Telephone operations Make a call

• , and then dial the telephone number.Press

Answer a call

• or any of the dialing keys.Press

End a call:

• or put the handset back in the Press OFF

telephone base or charger.

Volume

• During a call, press or to adjust VOL- VOL+

the listening volume.

Mute

The mute function allows you to hear the other party

but the other party cannot hear you.

1. During a call, press . The handset MUTE

displays Muted.

2. again to resume the Press MUTE

conversation. The handset displays

Microphone on brieﬂy.

Call waiting

When you subscribe to call waiting service from

your telephone service provider, you hear an alert

tone if there is an incoming call while you are

already on a call.

• to put the current call on hold Press FLASH

and take the new call.

• at any time to switch back and Press FLASH

forth between calls.

Find handset

Use this feature to ﬁnd the system handset.

To start paging:

• Press /FIND HANDSET on the telephone

base when not in use. All idle handsets ring

and display ** Paging **.

To end paging:

• Press /FIND HANDSET at the telephone

base.

-OR-

• or any of the dialing keys on the Press

handset.

NOTE

• Do not press and hold for /FIND HANDSET

more than four seconds. It may lead to handset

deregistration.

Redial list

Each handset stores the last ﬁve telephone

numbers dialed. When there are already ﬁve

entries, the oldest entry is deleted to make room

for the new entry.

Review and dial a redial list entry

1. Press REDIAL when the handset is not in use.

2. Press , or repeatedly until the REDIAL

desired entry displays.

3. Press to dial.

Delete a redial list entry

• When the desired redial entry displays, press

DELETE.

Produkt Specifikationer

Mærke:	Vtech
Kategori:	Telefon
Model:	CS6114
Type:	DECT telefon
Produktfarve:	Hvid
Batteriteknologi:	Nikkel-Metalhydrid (NiMH)
Volumenkontrol:	Dreje
Understøttelse af sprog:	ENG, ESP, FRE
Telefonsvarer:	Ingen
Kapacitet for telefonbog:	30 entries
Nummervisning:	Ja
Knapper med baggrundsbelysning:	Ja
Monteringstype:	Skrivebord
Baggrundsfarve:	Grøn
Genopkald:	Ja
Trådløs forbindelse:	Ingen
Mac kompabilitet:	Ingen
Vilkårlig tast svar:	Ja
Frekvensbånd:	1.9 GHz
Navigeringstast:	Ja