Vtech CS6649-2 Manual
Læs nedenfor 📖 manual på dansk for Vtech CS6649-2 (4 sider) i kategorien Telefon. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/4
You can choose to connect the telephone base for
desktop usage or wall mounting.
NOTES
Use only the adapters provided.
Make sure the electrical outlets are not controlled by
wall switches.
The adapters are intended to be correctly oriented in
a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into
a ceiling, under-the-table or cabinet outlet.
TIP
If you subscribe to digital subscriber line (DSL)
high-speed Internet service through your telephone
line, make sure you install a (not included)
between the telephone line cord and telephone wall
jack. Contact your DSL service provider for more
information.
•
•
•
•
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
DECT 6.0 cordless telephone
Abridged user’s manual
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
CS6648-2
CS6648-3
CS6648-4
CS6649
CS6649-2
CS6649-3
BC
on purchasing your new VTech product. Before
using this telephone, please read
.
This abridged user’s manual provides you with
basic installation and use instructions. A limited set
of features are described in abbreviated form.
Please refer to the online User’s manual for a full
set of installation and operation instructions at
www.vtechphones.com.
Telephones identified with this logo
have reduced noise and interference
when used with most T-coil equipped
hearing aids and cochlear implants.
The TIA-1083 Compliant Logo is a
trademark of the Telecommunications
Industry Association. Used under
license.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
1 set for CS6649;
2 sets for CS6648-2/CS6649-2;
3 sets for CS6648-3/CS6649-3
4 sets for CS6648-4
Abridged
user’s
manual
1 set for CS6648-2/CS6649-2;
2 sets for CS6648-3/CS6649-3
3 sets for CS6648-4
Important
safety
instructions
On when the phone is in use, or when the
answering system is answering a call.
On when a handset is being registered.
Flashes when there is an incoming call.
Flashes when handsets are being deregistered.
Flashes when another telephone on the
same line is in use.
Answer an incoming call when you receive a
call waiting alert.
Return to the previous menu or idle mode
without making changes.
Press and hold to erase the missed call
indicator when the phone is not in use.
While the phone is ringing, press to silence
the base ringer temporarily.
Review the caller ID log when the telephone
is not in use.
Scroll down while in a menu, or in the
directory, caller ID log or redial list.
Move the cursor to the left when entering
numbers or names.
Decrease the listening volume during a call
or message playback.
Review the directory when the phone is not
in use.
Scroll up while in a menu, or in the directory,
caller ID log or redial list.
Move the cursor to the right when entering
numbers or names.
Increase the listening volume during a call or
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
message playback.
Show a menu.
While in a menu, press to select an item, or
save an entry or setting.
Press to initiate or answer an intercom call,
or to transfer a call.
Press to page all handsets when the
phone is not in use.
Press to start or stop message playback.
Flashes when there are new messages or
memos in the answering system.
Press to delete the playing message or
playing announcement.
While reviewing the redial list, directory or
caller ID log, press to delete an individual
entry.
While entering names or numbers, press to
delete a character or digit.
Press once to repeat the playing message.
Press twice to play the previous message.
Press to skip to the next message.
Mute the microphone during a call.
Silence the base ringer temporarily while
the phone is ringing.
Adjust the listening volume.
Adjust the telephone base ringer volume.
Press to turn the built-in answering system
on or off.
Review the redial list.
Press repeatedly to view the last 10
numbers dialed.
Press and hold to insert a dialing pause
while dialing or entering numbers.
Press to make, answer or end a call.
During a call, press to switch between
the corded handset and the base
speakerphone.
Press and hold to set and turn on the quiet
mode, or turn it off.
Press repeatedly to display other dialing
options when reviewing a caller ID log entry.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Show the menu.
While in a menu, press to select an item or
save an entry or setting.
Hang up a call.
Return to the previous menu or idle mode
without making changes.
•
•
•
•
The battery icon flashes when the
battery is low and needs charging.
The battery icon animates when the
battery is charging.
The battery icon becomes solid when
the battery is fully charged.
The handset ringer is off.
There are new voicemail received from
your telephone service provider.
The answering system is turned on.
The ECO mode activates automatically
to reduce power consumption when
the handset is within range from the
telephone base.
The entry you are reviewing is new in
the caller ID log.
1/13
The number of current playing
message and the total number of
messages recorded.
The telephone base ringer is off.
There are new voicemail received from
your telephone service provider.
The entry you are reviewing is new in
the caller ID log.
13
The total number of messages
recorded when the telephone base is
not in use.
The number of the playing message.
•
•
Press to enter space during text editing.
Switch to tone dialing temporarily during a call.
Microphone.
While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of
the telephone number before dialing or
saving it in the directory.
Press and hold to set or dial your voicemail
number.
•
•
•
•
•
Delete digits while predialing.
Silence the handset ringer temporarily
while the phone is ringing.
Press and hold to erase the missed call
indicator when the phone is not in use.
Press and hold to set and turn on the quiet
mode, or turn it off.
Press repeatedly to display other dialing
options when reviewing a caller ID log entry.
Press to initiate or answer an intercom call,
or to transfer a call.
Mute the microphone during a call.
Silence the handset ringer temporarily while
the phone is ringing.
Delete the displayed entry while reviewing
the directory, caller ID log or redial list.
Delete digits or characters when entering
numbers or names.
Delete the playing message or playing
announcement.
Press to make or answer a call.
During a call, press to switch between the
handset speakerphone and the handset
earpiece.
Press to switch to tone dialing during a call
if you have pulse service.
While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of
the telephone number before dialing or
saving it in the directory.
Press and hold to set or dial your voicemail
number.
Press to make or answer a call.
During a call, press to answer an incoming
call when you receive a call waiting alert.
Review the redial list.
Press and hold to insert a dialing pause
while dialing or entering numbers.
On when the handset is charging in the
handset charger.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Install the battery as shown below.
NOTES
Use only supplied battery.
Charge the battery provided with this product
only in accordance with the instructions and
limitations specified in this manual.
If the handset will not be used for a long time,
disconnect and remove the battery to prevent
possible leakage.
•
•
•
Place the handset in the telephone base or
handset charger to charge.
Once you have installed the battery, the handset
LCD display indicates the battery status (see the
table on next page).
NOTES
For best performance, keep the handset in the
telephone base or charger when not in use.
The battery is fully charged after 11 hours of
continuous charging.
If you place the handset in the telephone base or the
charger without plugging in the battery, the screen
displays .
Battery
indicators Battery status Action
The screen
is blank, or
displays
and
flashes.
The battery has
no or very little
charge. The
handset cannot
be used.
Charge without
interruption
(about 30
minutes).
The screen
displays
and flashes.
The battery has
enough charge
to be used for a
short time.
Charge without
interruption
(about 30
minutes).
The screen
displays
.
The battery is
charged.
To keep the
battery charged,
place it in the
handset charger
when not in use.
•
•
•
After you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time.
NOTE
Make sure you set the date and time including the year
correctly; otherwise the answering system does not
announce the correct day of the week for your recorded
messages time stamp.
Use the dialing keys ( ) to enter the month
( ), date ( ) and year ( ). Then press
.
Use the dialing keys ( ) to enter the hour
( ) and minute ( ). Then press or to
choose or .
Press to save.
Press . If you hear a dial tone, the installation
is successful.
Make sure the installation procedures
described above are properly done.
It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP service
provider, the telephone line may need to be
rewired to allow all existing telephone jacks to
work. Contact your cable/VoIP service provider
for more information.
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance - which
can vary with the locations of the telephone base
and handset, the weather, and the layout of your
home or office.
When the handset is out of range, the handset
displays .
If there is a call while the handset is out of range,
it may not ring, or if it does ring, the call may not
connect well when you press . Move closer to
the telephone base, then press to answer the
call.
If the handset moves out of range during
a telephone conversation, there may be
interference. To improve reception, move closer to
the telephone base.
1.
2.
3.
•
•
You can use the telephone base or a cordless
handset to change your telephone settings.
Press when the phone is not in use.
Press or until the screen displays the
desired feature menu.
Press to enter that menu.
To return to the previous menu, press
.
To return to idle mode, press and hold
.
1.
2.
3.
•
•
The LCD language is preset to English. You can
select English, French or Spanish to be used in all
screen displays.
Press when the handset/telephone base
is not in use.
Press or to scroll to , then press
.
Press to select .
Press or to select , or
, then press .
NOTE
Make sure you set the date and time including the year
correctly; otherwise the answering system does not
announce the correct day of the week for your recorded
messages time stamp.
Press when the handset/telephone base
is not in use.
Press or to scroll to , then
press .
Use the dialing keys ( ) to enter the month
( ), date ( ) and year ( ). Then press
.
Use the dialing keys ( ) to enter the hour
( ) and minute ( ). Then press or to
choose or .
Press .
If you have pulse (rotary) service only, you can
switch from pulse to touch-tone dialing temporarily
during a call.
During a call, press .
Use the dialing keys to enter the number you
wish to dial. The telephone sends touch-tone
signals. It automatically returns to pulse dialing
mode after you end the call.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
Press or on the handset and then dial the
number.
Lift the corded handset, or press
on the telehpone base, then dial the number.
Press , or any of the dialing keys on the
handset.
Lift the corded handset, or press
or any of the dialing keys on the telephone base.
Press on the handset or place the handset
in the handset charger.
When you are using the corded handset, place
it on the telephone base.
When you are using the base speakerphone,
press .
When the cordless handset is on a call,
press to switch between the handset
speakerphone and the handset earpiece.
When the corded handset is on a call, press
on the telephone base to switch
between the telephone base speakerphone
and the corded handset.
During a call, press or
on the handset, or press or on
the telephone base to adjust the listening
volume.
The mute function allows you to hear the other
party but the other party cannot hear you.
During a call, press on the handset. The
handset displays until the mute function
is turned off.
Press on the handset again to resume
the conversation. The handset displays
on briefly.
During a call, press on the telephone
base. The telephone base displays and
the light turns on until the mute function
is turned off.
Press on the telephone base again to
resume the conversation. The telephone base
displays on briefly.
•
•
•
•
•
1.
2.
•
•
•
1.
2.
1.
2.
a
b
c
d
e
fgh
i
j
k
l
THIS SIDE UP
While on an outside call, you can transfer the call
from a cordless handset to another handset or the
telephone base.
During a call, press .
Press or to scroll to , then press
.
Your handset shows Press for
the telephone base or - for to
.
To answer the call on the destination handset,
press , or any dialing key on the handset,
or lift the corded handset, or press
or any dialing key on the telephone base.
You can use the telephone base and a cordless
handset, or two cordless handsets at a time on an
outside call.
When a handset or the telephone base is
already on a call, press or on another
handset to join the call.
Press or place the handset in the handset
charger to exit the call. The call continues until
both devices hang up.
Lift the corded handset or press
on the telephone base.
Place the corded handset back to the
telephone base or press on
the telephone base to exit the call. The call
continues until both devices hang up.
If you subscribe to call waiting service from your
telephone service provider, you hear an alert
tone when there is an incoming call while you are
already on a call.
Press to put your current call on hold
and take the new call.
Press to switch back and forth between
calls.
Use this feature helps you find misplaced
handsets.
Press on the telephone base
and its screen displays . All idle
handsets ring and display .
Press , , or any of the dialing keys
on the cordless handset.
Place the cordless handset to the handset
charger.
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
Press on the telephone base.
NOTE
Do not press and hold for more than
four seconds. It may lead to handset deregistration.
•
Use the intercom feature for conversations
between the telephone base and a cordless
handset, or two cordless handsets.
Press for the telephone base or - for
to .
Press on the cordless handset when the
phone is not in use.
To answer the intercom call on the destination
handset, press , , or any dialing key.
To answer the intercom call at the telephone
base, press , , any dialing
key, or lift the corded handset.
3. To end the intercom call on either handset, one
party presses , or places the handset back
in the handset charger.
To end the intercom call at the telephone
base, press or when using
the base speakerphone, or place the corded
handset back to the telephone base.
Press on the telephone base when the
phone is not in use.
To answer the intercom call on the destination
handset, press , , or any dialing key.
To end the intercom call at the telephone
base, press , or when using
the base speakerphone, or place the corded
handset back to the telephone base.
To end the intercom call on the destination
handset, press , or place the handset back
in the handset charger.
•
1.
2.
1.
2.
3.
If you receive an incoming outside call during an
intercom call, you will hear an alert tone.
To answer the call, press . The intercom call
ends automatically.
To end the intercom call without answering or
canceling the incoming call, press . The
telephone continues to ring.
Press , or place the corded
handset back to the base. The intercom call
ends automatically. Then press ,
or lift up the corded handset to answer the call.
To end the intercom call without answering or
canceling the incoming call, press
, or place the corded handset
back to the base. The telephone continues to
ring.
Use the intercom feature to transfer an outside
call to another cordless handset or the telephone
base.
During a call, press .
To answer the call on the destination handset,
press , , , or any dialing key. The
outside call is still on hold. You can now have a
private intercom conversation.
To answer the call at the telephone base,
press , , any dialing key or
lift the corded handset. The outside call is still
on hold. You can now have a private intercom
conversation.
During a call, press .
To answer the call on the destination handset,
press , , , or any dialing key. The
outside call is still on hold. You can now have a
private intercom conversation.
•
•
•
•
1.
2.
1.
2.
The directory can store up to 50 entries, which are
shared by all handsets and the telephone base.
Each entry may consist of a telephone number
with up to 30 digits and a name with up to 15
characters.
Enter the number when the phone is not in use.
Press , then go to Step 3.
Press on the handset or on the
telephone base when the phone is not in
use, then press or to scroll to
, then press .
Press or to scroll to , then
press .
2. Use the dialing keys to enter the number.
Copy a number from the redial list by pressing
and then press , or
repeatedly to find the desired number. Press
to copy the number.
3. Press to move on to enter the name.
4. Use the dialing keys to enter the name.
Additional key presses show other characters
of that particular key.
5. Press to save.
Press to backspace and erase a digit
or character.
Press and hold to erase the entire entry.
1.
•
•
•
•
Press or to move the cursor to the left or
right.
Press and hold to insert a dialing
pause (for entering numbers only).
Press to add a space (for entering names
only).
Entries are sorted alphabetically.
Press on the cordless handset when the
phone is not in use, or on the telephone
base when the telephone base is not in use.
Press or to browse through the directory,
or use the dialing keys to start a name search.
When the desired entry appears:
Press or on the handset.
Lift the corded handset or press
on the telephone base.
When the desired entry displays, press
.
Use the dialing keys to edit the number, then
press .
Use the dialing keys to edit the name, then
press .
When the desired entry appears, press
. When the screen displays
, press .
You can copy up to nine directory entries into the
speed dial locations ( and - ) so that you can
dial these numbers more quickly.
Press when the phone is not in use.
Press or to scroll to , then press
.
Press or to scroll to , then
press .
Press , or a dialing key ( or - ) to choose
the desired speed dial location.
Press . The screen displays
Press or to scroll to desired entry, then
press .
When the phone is not in use, press and hold a
dialing key ( or - ) to dial the number stored
in the corresponding speed dial location.
•
•
•
1.
2.
•
1.
2.
3.
1.
1.
2.
3.
4.
5.
6.
•
Each handset and the telephone base store the
last 10 telephone numbers dialed. When there are
already 10 entries, the oldest entry is deleted to
make room for the new entry.
Press on the handset or the telephone
base when the phone is not in use.
Press , or repeatedly until the
desired entry displays.
When the desired entry displays, press or
on the handset to dial.
Lift the corded handset or press
on the telephone base to dial.
While the screen displays the desired number,
press on the handset or press
on the telephone base.
1.
2.
3.
•
a
b
c
d
e
f
g
h
i
j
k
l
m
n
Produkt Specifikationer
| Mærke: | Vtech |
| Kategori: | Telefon |
| Model: | CS6649-2 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Vtech CS6649-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Telefon Vtech Manualer
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
Telefon Manualer
- Telefon SilverCrest
- Telefon Acer
- Telefon Amplicomms
- Telefon Denver
- Telefon Sencor
- Telefon Sony
- Telefon Siemens
- Telefon Samsung
- Telefon GE
- Telefon Panasonic
- Telefon Philips
- Telefon LG
- Telefon AEG
- Telefon Audio-Technica
- Telefon Doro
- Telefon Gigaset
- Telefon AT&T
- Telefon Pioneer
- Telefon Apple
- Telefon Logitech
- Telefon Daewoo
- Telefon Sennheiser
- Telefon Emporia
- Telefon OpenVox
- Telefon Grundig
- Telefon Akuvox
- Telefon D-Link
- Telefon Motorola
- Telefon Roland
- Telefon Asus
- Telefon Toshiba
- Telefon Pyle
- Telefon Brother
- Telefon Lenovo
- Telefon Yamaha
- Telefon Infiniton
- Telefon OnePlus
- Telefon AVM
- Telefon Logik
- Telefon Planet
- Telefon Hama
- Telefon Thomson
- Telefon Nokia
- Telefon JBL
- Telefon TriStar
- Telefon TRENDnet
- Telefon Trevi
- Telefon Trust
- Telefon Fysic
- Telefon Topcom
- Telefon Flex
- Telefon Blaupunkt
- Telefon Sandstrøm
- Telefon Uniden
- Telefon Hitachi
- Telefon Medion
- Telefon Sweex
- Telefon Linksys
- Telefon Cisco
- Telefon Huawei
- Telefon Ranex
- Telefon Bang And Olufsen
- Telefon Geemarc
- Telefon Jabra
- Telefon Loewe
- Telefon Crosley
- Telefon Netgear
- Telefon EnVivo
- Telefon Lifetec
- Telefon Avaya
- Telefon Parrot
- Telefon Telefunken
- Telefon Microsoft
- Telefon Jacob Jensen
- Telefon Alcatel
- Telefon Zebra
- Telefon Olympia
- Telefon Plantronics
- Telefon Xiaomi
- Telefon Krüger&Matz
- Telefon RugGear
- Telefon CAT
- Telefon Marmitek
- Telefon Oppo
- Telefon Crosscall
- Telefon NEC
- Telefon Alcatel-Lucent
- Telefon MT Logic
- Telefon Kyocera
- Telefon Xblitz
- Telefon LevelOne
- Telefon Marshall
- Telefon ArtDio
- Telefon Binatone
- Telefon Honor
- Telefon ZyXEL
- Telefon Tiptel
- Telefon Sagem
- Telefon Fortinet
- Telefon Overmax
- Telefon Archos
- Telefon Yealink
- Telefon RCA
- Telefon Ubiquiti Networks
- Telefon AVerMedia
- Telefon Currys Essentials
- Telefon EnGenius
- Telefon Grandstream
- Telefon MaxCom
- Telefon Patton
- Telefon Renkforce
- Telefon SPC
- Telefon ZTE
- Telefon Mikrotik
- Telefon Switel
- Telefon Brondi
- Telefon HTC
- Telefon Escene
- Telefon BlackBerry
- Telefon Evolveo
- Telefon Audioline
- Telefon BT
- Telefon XD Enjoy
- Telefon Mitel
- Telefon GPO
- Telefon Wiko
- Telefon Telstra
- Telefon Aastra
- Telefon Snom
- Telefon Mackie
- Telefon Vimar
- Telefon Oricom
- Telefon Oregon Scientific
- Telefon Lexibook
- Telefon Scosche
- Telefon Prestigio
- Telefon MyPhone
- Telefon Draytek
- Telefon Realme
- Telefon Crestron
- Telefon Lindy
- Telefon MXL
- Telefon Cortelco
- Telefon Legrand
- Telefon CTA Digital
- Telefon Steren
- Telefon Neat
- Telefon Tecdesk
- Telefon Dnake
- Telefon Gamdias
- Telefon Lewitt
- Telefon Allview
- Telefon Alcon
- Telefon Airlive
- Telefon AGFEO
- Telefon Amplicom
- Telefon Ascom
- Telefon Proximus
- Telefon BeeWi
- Telefon Sonim
- Telefon Sunstech
- Telefon Sylvania
- Telefon Swissvoice
- Telefon Marquant
- Telefon Nordmende
- Telefon KPN
- Telefon Belgacom
- Telefon Auerswald
- Telefon Profoon
- Telefon Teledex
- Telefon Valcom
- Telefon Innovaphone
- Telefon Hagenuk
- Telefon Essentiel B
- Telefon Logicom
- Telefon Peaq
- Telefon Vogtec
- Telefon Fanvil
- Telefon Spectralink
- Telefon VXi
- Telefon Unify
- Telefon Sagemcom
- Telefon Edenwood
- Telefon Premier
- Telefon HUMANTECHNIK
- Telefon Polycom
- Telefon Primare
- Telefon Mobotix
- Telefon Edge-Core
- Telefon ClearOne
- Telefon Clarity
- Telefon Syco
- Telefon SMC
- Telefon Digium
- Telefon FlyingVoice
- Telefon Davolink
- Telefon KONFTEL
- Telefon Mitsai
- Telefon Clear Sounds
- Telefon ALLO
- Telefon Oukitel
- Telefon On-Q
- Telefon Canyon
- Telefon Tecno
- Telefon Olitech
- Telefon Dopod
- Telefon Hamlet
- Telefon Sedna
- Telefon Cubot
- Telefon AudioCodes
- Telefon 3Com
- Telefon British Telecom
- Telefon CyberData Systems
- Telefon Bintec-elmeg
- Telefon Wantec
- Telefon Algo
- Telefon Future Call
- Telefon 4family
- Telefon Tador
- Telefon CSL
- Telefon Liam&Daan
- Telefon Lively
Nyeste Telefon Manualer
15 December 2024
15 December 2024
14 December 2024
11 December 2024
10 December 2024
6 December 2024
6 December 2024
6 December 2024
23 November 2024
21 November 2024