VXi BlueParrott B250-XT Manual

VXi Hovedtelefon BlueParrott B250-XT

Læs nedenfor 📖 manual på dansk for VXi BlueParrott B250-XT (2 sider) i kategorien Hovedtelefon. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

FCC NOTICE TO USERS

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation. Users are not permitted to make changes or modify the

device in any way. Changes or modications not approved by VXI Corporation will

void the user’s authority to operate the equipment. NOTE: This equipment has been

tested and found to comply with the limits for a Class B digital device pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment on and off, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antennae.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

VXI WARRANTY

1. VXI warrants that your B250-XT headset system will be free from defects

in material and workmanship for one year from the date of purchase. If,

during the rst year from the date of purchase, your B250-XT headset

system fails to work due to a defect in material or workmanship, VXI will

repair or replace the product, at its election, free of charge. Without proof of

purchase, the warranty period begins on the date of manufacture. Consumable

components (for example, cushions, battery and fuse) are not included in this

one-year warranty. You may register your warranty online at www.vxicorp.

com or by calling customer service at 1-800-742-8588.

2. The foregoing limited warranty does not cover equipment failure

attributable to accident, improper operation, misuse, abuse, or any cause other

than defects in the materials or workmanship of VXI’s products.

3. VXI’s obligations under this warranty are limited to repair or replacement

(at our option) of any defective part returned to VXI at the customer’s expense.

Returned products require a Return Authorization that may be obtained

by calling 1-800-742-8588. Products returned to VXI for repair under this

warranty will be return shipped to the customer at VXI’s expense.”

4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Some jurisdictions do not permit the exclusion of

implied warranties and the foregoing exclusions may not apply to you.

5. In no event shall VXI be responsible for any other damages whatsoever,

including direct, indirect, special, incidental, consequential, or other damages

for breach of this or any other warranty, express or implied.

VXI Corporation 271 Locust Street, Dover, NH 03820 USA

1-800-742-8588 / 603-742-2888 / www.blueparrott.com

B250-XT

USER GUIDE

Compatible with Bluetooth phones & Bluetooth enabled

computers (Windows® or Macintosh®)

FUNCTIONS AND INDICATORS AT A GLANCE

Function Button/Duration of press Audio Indicator Visual Indicator Lights

Power on MFB / 2-3 sec. Two rising tones Blue light ashes

Power off MFB / 2-3 sec. Two falling tones All lights go off

Enter pairing mode MFB / 5-15 sec. Two + Four rising tones Red & blue lights ash alternately

Volume up Vol Up / quick press Single tone None

Volume down Vol Dwn / quick press Single tone None

Mute on Vol Up / 2 sec. Single tone None

Mute off Vol Up / 2 sec. Singe tone None

(Short reminder beep every 10 seconds while mute is on)

Voice dial (start) MFB / 1 quick press Single tone None

Voice dial (end) MFB / 1 quick press Single tone None

Last number redial Vol Dwn / 1 sec. Single tone None

Answer a call MFB / quick press Two rising tones Blue light ashes slightly slower

End a call MFB / quick press Two falling tones Blue light ashes slightly faster

Reject a call* MFB / 2 sec. Two falling tones None

*Sends call to Voice Mail (if available)

Transfer audio Vol Dwn / 1-2 sec. Long tone None

(MFB = Multifunction Button)

Range: Up to 66 feet. Best range is achieved with line-of-

sight positioning of headset and cell phone.

Certain conditions and obstructions, such as wireless

devices, placing your phone on a metal surface (such as

your vehicle’s hood), walls, etc., can inhibit radio wave

transmission and reduce range.

Talk Time: 16+ hours on a 12 hour charge.

Standby Time: Up to 150 hours on a 12 hour charge.

Auto (DC) Charger Inline Fuse Replacement:

If neither of the headset charging indicators

light when the auto adapter is connected to the

headset and power source, check the charger’s

inline fuse. Replace with 1A 250V Slow-Blow

glass fuse (3AG) if necessary. Fuses are available

at most automotive stores. To replace, simply

unscrew the tip of the auto adapter (see photo,

right) and remove the fuse (be careful not to lose

the spring that is inside). Put new fuse in and

screw the tip back on.

SPECIFICATIONS

12 ADDITIONAL FUNCTIONS

Note: Your cell phone must support the following functions

(consult the phone owner’s manual).

LAST NUMBER REDIAL

To re-dial the last number that was dialed from the

cell phone, press and hold the volume down button for

approximately 1 second. A beep will be heard and the phone

will redial the last number.

REJECT A CALL

To reject an incoming call, press and hold the MFB for 2

seconds. You will hear 2 falling tones and the incoming call

will be transferred to your voice mail (if available).

More functions on panel 13

13 ADDITIONAL FUNCTIONS

VOICE DIAL

To use the voice dial feature of the cell phone, quickly

press the MFB on the headset; a tone will be heard and

the phone’s voice dialer should open; clearly speak the

command. Repeat quick press of the MFB to end voice

dial. The headset must be in standby mode to use this

feature.

TRANSFER AUDIO

To transfer audio from the headset to the cell phone

while on a call, press and hold the volume down button

for 1-2 seconds. A tone will be heard and audio will

transfer to the phone; repeat to transfer audio back to

the headset. When audio is transferred to the phone, the

red light will ash until audio is transferred back to the

headset.

14 ADDITIONAL FEATURES

TURN HEADSET INDICATOR LIGHTS OFF/ON

A quick press of both the volume up and volume down

buttons at the same time will turn the headset indicator

lights off, repeat to turn the indicator lights on. Headset

must be paired to a phone and in standby mode or on a

call to use this feature. When powering on the headset, the

indicator lights will be in the same state as they were when

last powered off.

AUTOMATIC BLUETOOTH CONNECTION

When the headset is powered on, it will automatically

attempt to connect to the last device it was paired with. If

the headset was paired with multiple devices and the last

connected device is not available (turned off, out of range,

etc.), the headset will attempt to connect to the second to

the last device it was connected to, etc. It is also possible to

reconnect to the device with a quick press of the headset’s

MFB. A tone will be heard and the two devices should

connect.

MULTIPLE DEVICE PAIRING

The B250-XT can pair with up to seven devices at the

same time; however, only one device may be connected to

the headset at a time. To pair the headset with a Bluetooth

cell phone or other Bluetooth device such as a Bluetooth

enabled computer, follow the instructions in panel 6 and

10 of this manual. Remember that all devices except for

the one being paired must either be powered off or at least

50 ft. away during the pairing process.

Once all devices are paired, connection to the last paired

device can be made by turning the headset off and then

on again, or with a quick press of the MFB. The headset

will connect to the devices in opposite order of pairing.

For instance, if device A, B and C were paired in that

order, connection will be established to C rst. If C is

not available (turned off, out of range), the headset will

connect to B, etc.

To reset the headset’s internal paired devices list, press and

hold both the volume up and the volume down buttons for

5-6 seconds.

A double beep with be heard and the list will be reset.

This procedure may be necessary if the headset will not pair

or connect to a device.

NOTE: Pairing information for devices previously paired

with the headset will be lost. Headset will need to be paired

to the device after reset has occurred.

RESET PAIRED DEVICES LIST

Printed in China

CANADA / IC NOTICE TO USER

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

This device complies with RSS-310 of Industry Canada. Operation is subject to the

condition that this device does not cause harmful interference. This Class B digital

apparatus complies with Canadian ICES-003 (Cet appareil numérique de la classe B

est conforme à la norme NMB-003 du Canada).

Produkt Specifikationer

Mærke:	VXi
Kategori:	Hovedtelefon
Model:	BlueParrott B250-XT
Brugervejledning:	Ja
Produktfarve:	Sort
Produkttype:	Headset
Bluetooth:	Ja
Bluetooth-profiler:	A2DP
Anbefalet brug:	Kontor/Callcenter
Impedens:	- ohm (Ω)
Forbindelsesteknologi:	Trådløs
Taletid:	16 t
Standby tid:	150 t
Bæremåde:	Headset
Headset type:	Mono
Hovedtelefon frekvens:	- Hz
Mikrofontype:	Boom
Mikrofon mute:	Ja
Trådløs rækkevidde:	20 m
Oplader:	Ja
Mikrofon frekvens:	- Hz
Ørekobling:	Supraaural
Magnet-type:	Neodym
Akustisk system:	Åbn
Støjreducerende mikrofon:	Ja