VXi UC ProSet 10V Manual

VXi Headset UC ProSet 10V

Læs nedenfor 📖 manual på dansk for VXi UC ProSet 10V (2 sider) i kategorien Headset. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

HOW TO WEAR AND ADJUST YOUR HEADSET

1. Place the headset on your head.

2. Position the speaker(s) directly on your ear(s). You can slide the headband in

or out of the side support for proper fit.

3. Position the microphone about one finger’s width away from your face near the

center of your mouth. The microphone boom is quite flexible, so you can bend

it toward your mouth as needed for optimum sound quality and a custom fit.

4. The headband is also very flexible and can be easily adjusted by gently flexing

outward to loosen or inward to tighten for a custom fit.

CHOOSE YOUR CONNECTION

Telephone Amplifier or CT Switch

Connect your headset to the amplifier or switch headset cord. Be sure the other end of this cord is plugged into the headset port on the amplifier

or switch—just look for a headset icon. If necessary, consult your amplifier or switch user guide to locate the port.

Headset-Ready Telephone

Make sure the headset is connected to a lower cord that is compatible with your phone system.* Plug the end of the lower cord into the headset

port on your telephone. Some phones allow for connection to the handset port. Please consult your telephone user manual for more information.

Computer

For USB connection, connect your headset to a VXi X200 USB adapter cord, and plug the X200 cord into a USB port on your computer.

For soundcard connection, connect your headset to a VXi QD 1030 cord, and insert the cord’s plugs into the microphone and speaker ports on

your computer.

*To access our interactive phone and lower cord compatibility guide, visit us on-line at www.vxicorp.com > Resources > Phone Compatibility.

If you need additional technical assistance or product information, please call VXi Technical Support, toll-free at (800) 742-8588.

VXi UC ProSet Instructions

Simple to set up and use.

Gently flex headband

outward or inward to

loosen or tighten fit.

Microphone boom

easily flexes for

proper positioning.

Produkt Specifikationer

Mærke:	VXi
Kategori:	Headset
Model:	UC ProSet 10V
Produkttype:	Headset
Anbefalet brug:	Kontor/Callcenter
Impedens:	- ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Bæremåde:	Headset
Headset type:	Mono
3,5 mm stik:	Ja
Hovedtelefon frekvens:	- Hz
Mikrofontype:	Boom
Mikrofon frekvens:	- Hz
Ørekobling:	Circumaural
Kapabilitet:	V-series amplifiers, direct connect cords