Wimberley RB-100 Manual


Læs nedenfor 📖 manual på dansk for Wimberley RB-100 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
The Wimberley Riser Block allows you to use the
Wimberley Head Version II on the original Skimmer
ground pod. It can also be used to give you additional
height when using the Skimmer II ground pod.
The Riser Block can be mounted on any stud 3/8”-16
mount on a tripod, monopod or ground pod to give you
an additional of height under any tripod head with a 1”
3/8” 16 -mounting hole. A 3/8-1/4” reducer bushing can be
used to install the RB 100 on a tripod or monopod stud -1/4”
(not included). You can stack Riser Blocks in increments for
additional height as needed.
Note: You can stack additional The RB 100 is tall. -1”
blocks if more height is desired.
Instructions
Wimberley, Inc. - - - Phone: 1 434 529 8385
1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com info@tripodhead.com
Installation of the Riser Block:
1. Simply screw the Riser Block onto the mounting stud of
the Skimmer. It is a good idea to attach the RB 100 to the -
Skimmer tightly so that it doesn t come loose when you
remove the Head. Insert the pin into the leverage hole on 2”
the side of the RB 100 to give you more mechanical -
advantage when attaching it tightly to the Skimmer.
2. Then screw the Wimberley Head Version II onto the
Riser Block (see Figure 1).
If you plan to leave the RB 100 permanently attached to -
the Skimmer (or any mount such as a tripod, monopod,
or ground pod), you may want to use medium strength
(blue) Loctite adhesive or a similar product as directed.
About the RB-100
Package Contents:
RB-100: 1” Riser Block (Qty 1)
Hardware: 2” leverage pin (Qty 1)
Weight: 3.1 oz
Dimensions (L x W x H): 1.94x 1.94x 1.36” (block w/ mounting stud)
Materials: Anodized 6061 Aluminum, stainless steel
Figure 1
Wimberley, Inc. - - - Phone: 1 434 529 8385
1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com info@tripodhead.com
5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
Wimberley, Inc. ©2017, All Rights Reserved Rev. 170707
Thank you for your interest in Wimberley products. If you have any questions or comments please feel free to contact us.
Made in USA
RB-100 Riser Block


Produkt Specifikationer

Mærke: Wimberley
Kategori: Ikke kategoriseret
Model: RB-100

Har du brug for hjælp?

Hvis du har brug for hjælp til Wimberley RB-100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Wimberley Manualer

Wimberley

Wimberley PP-400 Manual

4 September 2024
Wimberley

Wimberley PP-300 Manual

4 September 2024
Wimberley

Wimberley PP-310 Manual

4 September 2024
Wimberley

Wimberley AP-11 Manual

4 September 2024
Wimberley

Wimberley M-9 Manual

4 September 2024
Wimberley

Wimberley M-6 Manual

4 September 2024
Wimberley

Wimberley M-7 Manual

4 September 2024
Wimberley

Wimberley M-8 Manual

4 September 2024
Wimberley

Wimberley M-1 Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rittal

Rittal SZ 2500.100 Manual

12 November 2024
Voltcraft

Voltcraft SNPS-65 Manual

12 November 2024
Hertz

Hertz CAPRI H100 Manual

12 November 2024
Nuki

Nuki Keypad 2.0 Manual

12 November 2024
Schellenberg

Schellenberg 20023 Manual

12 November 2024
Schellenberg

Schellenberg 20262 Manual

12 November 2024
Silverline

Silverline KUL23 Manual

12 November 2024
ORNO

ORNO OR-ZL-1602 Manual

12 November 2024
Biltema

Biltema 26-2030 Manual

12 November 2024
Biltema

Biltema 47-7005 Manual

12 November 2024